{"product_id":"wd-electronics-kawasaki-ridge-wiper-delay-module","title":"WD Electronics Kawasaki Ridge Wiper Delay Module (2024+)","description":"\u003cp\u003e\u003cstrong\u003eIf your Kawasaki Ridge only has one wiper speed, you already know the problem: in a light drizzle the blade drags across a half-dry windshield, chattering and smearing, because the factory switch has no intermittent setting.\u003c\/strong\u003e The WD Wiper Delay Module wires inline with that factory switch and adds two selectable intermittent-wiper intervals, so the blade wipes and then waits.\u003c\/p\u003e\n\u003cp\u003eEach kit ships as three pieces: the module itself, a machine-specific wiring harness, and a rocker switch that selects between the short and long delay. WD Electronics designed and developed the system in-house.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAdds two selectable intermittent-wiper settings to a machine that has none from the factory\u003c\/li\u003e\n\u003cli\u003eWorks inline with the factory wiper switch — the stock control stays in place\u003c\/li\u003e\n\u003cli\u003eShort delay for steady rain, snow or mud; long delay for lighter moisture\u003c\/li\u003e\n\u003cli\u003eMachine-specific wiring harness with 5-pin Aptiv M\/P 280 connectors\u003c\/li\u003e\n\u003cli\u003eIncluded rocker switch puts both settings within reach while driving\u003c\/li\u003e\n\u003cli\u003eDesigned and developed in-house by WD Electronics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: One-Speed Factory Wipers On The Kawasaki Ridge\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eA wiper that runs continuously whether the windshield needs it or not\u003c\/li\u003e\n\u003cli\u003eBlade chatter and streaking when the glass is only lightly wet\u003c\/li\u003e\n\u003cli\u003eReaching down to flick the wiper on and off through every passing shower\u003c\/li\u003e\n\u003cli\u003eUnnecessary wear on the blade and wiper motor from constant sweeping\u003c\/li\u003e\n\u003cli\u003eSpray and mist off the trail that needs an occasional wipe, not a constant one\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Kawasaki Ridge Owners Who Ride Or Work In Changing Weather\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOwners running a windshield and wiper who ride through variable conditions\u003c\/li\u003e\n\u003cli\u003eWork and utility use where the machine is out in weather all day\u003c\/li\u003e\n\u003cli\u003eRiders in dust, mist or spray who need a wipe now and then rather than constantly\u003c\/li\u003e\n\u003cli\u003eAnyone who wants a factory-feeling control rather than a toggle they operate by hand\u003c\/li\u003e\n\u003cli\u003eOwners who want the upgrade without cutting into the factory wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFunction: intermittent-wiper delay control, wired inline with the factory wiper switch\u003c\/li\u003e\n\u003cli\u003eDelay settings: two selectable intervals (short and long)\u003c\/li\u003e\n\u003cli\u003eControl: included standard rocker switch\u003c\/li\u003e\n\u003cli\u003eHarness: machine-specific, 5-pin Aptiv M\/P 280 connectors\u003c\/li\u003e\n\u003cli\u003eKit contents: WD Wiper Delay Module, machine-specific wiring harness, rocker switch\u003c\/li\u003e\n\u003cli\u003eDesigned and developed in-house by WD Electronics\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: WDM-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003eWD lists this module for:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2024+ Kawasaki Ridge\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis is a machine-specific kit — the harness and connectors are built for the machines listed above. Fitment is not guaranteed on any application not listed here. WD builds separate wiper delay modules for its other supported platforms, so check that your machine appears above before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eMy Kawasaki Ridge wipers only run at one constant speed. Does this fix that?\u003c\/h3\u003e\u003cp\u003eThat is exactly what it is for. The factory wiper switch on the Kawasaki Ridge gives you continuous sweep with no intermittent position. This module wires inline with that switch and adds two intermittent delay settings, so the blade parks between wipes instead of dragging across a nearly dry windshield.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between the two delay settings?\u003c\/h3\u003e\u003cp\u003eThe short delay wipes more frequently and suits steady rain, snow or mud. The long delay wipes less often and suits light moisture or spray. You choose between them with the included rocker switch, so you can change settings as conditions change without stopping.\u003c\/p\u003e\u003ch3\u003eDoes this replace my factory Kawasaki Ridge wiper switch?\u003c\/h3\u003e\u003cp\u003eNo. The module works inline with the factory wiper switch — the stock switch stays in place and keeps doing its job. The included rocker switch is an addition that selects which delay interval the module uses.\u003c\/p\u003e\u003ch3\u003eWill it fit any Kawasaki Ridge?\u003c\/h3\u003e\u003cp\u003eIt is built specifically for the Kawasaki Ridge, using a machine-specific harness with 5-pin Aptiv M\/P 280 connectors. Fitment is not guaranteed on any application not listed in the Fitment section. Check your year and model before ordering, and if you run a different machine, WD builds separate modules for the other platforms.\u003c\/p\u003e\u003ch3\u003eWhat comes in the kit?\u003c\/h3\u003e\u003cp\u003eThree pieces: the WD Wiper Delay Module, a machine-specific wiring harness, and a rocker switch for controlling the delay setting.\u003c\/p\u003e\u003ch3\u003eDo I need to cut or splice anything to install it?\u003c\/h3\u003e\u003cp\u003eNo. The harness is machine-specific and uses matching connectors, so the module drops in between your factory wiring and the wiper switch. You will need to route the harness and find a spot to mount the rocker switch where you can reach it while driving.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy WD Electronics\u003c\/h2\u003e\u003cp\u003eWD Electronics builds plug-and-play electrical systems for UTVs — street legal kits, turn signal kits, horns and harnesses — designed and developed in-house rather than adapted from generic automotive parts. The wiper delay module follows the same approach: a machine-specific harness and matching connectors, so the upgrade works with the factory controls instead of around them.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFinish Your Kawasaki Ridge Weather Setup\u003c\/h2\u003e\u003cp\u003eBefore ordering, confirm your machine and year against the Fitment list above, and check that you have a windshield and factory wiper already fitted — this module controls an existing wiper system rather than supplying one. Plan where the rocker switch will mount so it is within reach from the driver's seat. If you are building out the same machine for road or all-weather use, the WD street legal and turn signal kits, the hazard add-on and the 125dB air horn all run on the same plug-and-play approach. Order from \u003cstrong\u003eDunes 2 Dezert SXS\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"My Kawasaki Ridge wipers only run at one constant speed. Does this fix that?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"That is exactly what it is for. The factory wiper switch on the Kawasaki Ridge gives you continuous sweep with no intermittent position. This module wires inline with that switch and adds two intermittent delay settings, so the blade parks between wipes instead of dragging across a nearly dry windshield.\"}}, {\"@type\": \"Question\", \"name\": \"What is the difference between the two delay settings?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The short delay wipes more frequently and suits steady rain, snow or mud. The long delay wipes less often and suits light moisture or spray. You choose between them with the included rocker switch, so you can change settings as conditions change without stopping.\"}}, {\"@type\": \"Question\", \"name\": \"Does this replace my factory Kawasaki Ridge wiper switch?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. The module works inline with the factory wiper switch — the stock switch stays in place and keeps doing its job. The included rocker switch is an addition that selects which delay interval the module uses.\"}}, {\"@type\": \"Question\", \"name\": \"Will it fit any Kawasaki Ridge?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is built specifically for the Kawasaki Ridge, using a machine-specific harness with 5-pin Aptiv M\/P 280 connectors. Fitment is not guaranteed on any application not listed in the Fitment section. Check your year and model before ordering, and if you run a different machine, WD builds separate modules for the other platforms.\"}}, {\"@type\": \"Question\", \"name\": \"What comes in the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Three pieces: the WD Wiper Delay Module, a machine-specific wiring harness, and a rocker switch for controlling the delay setting.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need to cut or splice anything to install it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. The harness is machine-specific and uses matching connectors, so the module drops in between your factory wiring and the wiper switch. You will need to route the harness and find a spot to mount the rocker switch where you can reach it while driving.\"}}]}\u003c\/script\u003e","brand":"WD Electronics","offers":[{"title":"Default Title","offer_id":51534501675044,"sku":"WDM-4","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/WDM-4_7a8d610f-4e61-4d98-8df1-e4d8e01d3bea.jpg?v=1789758845","url":"https:\/\/dunes2dezertsxs.com\/products\/wd-electronics-kawasaki-ridge-wiper-delay-module","provider":"Dunes 2 Dezert SXS","version":"1.0","type":"link"}