{"product_id":"kfi-cfmoto-zforce-500-800-1000-utv-plow-mount","title":"KFI CFMOTO ZForce 500\/800\/1000 UTV Plow Mount (2014-2023)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI CFMOTO ZForce plow mount is the vehicle-side base for a KFI UTV snow plow, built so your CFMOTO ZForce can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the CFMOTO ZForce 500, 800 (G1) and 1000 models listed below, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a CFMOTO ZForce plow on G1 machines: cfmoto zforce 800 plow, cfmoto snow plow and cf moto snow plow shoppers with these years start here.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the CFMOTO ZForce 500, 800 (G1) and 1000 models listed below\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the CFMOTO ZForce\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the CFMOTO ZForce\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: CFMOTO ZForce Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCFMOTO ZForce owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: plow mount (106601), 12-inch soft strap (106470) and hardware kit HK-438 (U-bolts)\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eZForce 500 Trail (2016-2022; 2023 Canada only)\u003c\/li\u003e\n\u003cli\u003eZForce 800 Base \/ EX \/ Trail, G1 (2014-2022; 2023 Trail G1 Canada only)\u003c\/li\u003e\n\u003cli\u003eZForce 1000 (2018-2019)\u003c\/li\u003e\n\u003cli\u003eZForce 1000 Classic (2021, Canada only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMay require drilling. KFI lists it as the direct replacement for plow mount 105645. Drilling: Yes. KFI's instructions mark the rear inner U-bolt holes on the skid plate and drill them with at least a 7\/16-inch bit. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my CFMOTO ZForce?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: ZForce 500 Trail (2016-2022; 2023 Canada only); ZForce 800 Base \/ EX \/ Trail, G1 (2014-2022; 2023 Trail G1 Canada only); ZForce 1000 (2018-2019); ZForce 1000 Classic (2021, Canada only). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my CFMOTO ZForce?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI's instructions mark the rear inner U-bolt holes on the skid plate and drill them with at least a 7\/16-inch bit.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my CFMOTO ZForce?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your CFMOTO ZForce Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI CFMOTO ZForce plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my CFMOTO ZForce?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: ZForce 500 Trail (2016-2022; 2023 Canada only); ZForce 800 Base \/ EX \/ Trail, G1 (2014-2022; 2023 Trail G1 Canada only); ZForce 1000 (2018-2019); ZForce 1000 Classic (2021, Canada only). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my CFMOTO ZForce?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI's instructions mark the rear inner U-bolt holes on the skid plate and drill them with at least a 7\/16-inch bit.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my CFMOTO ZForce?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528921636,"sku":"106600","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/3a27-671958ae53038.png?v=1760945058","url":"https:\/\/dunes2dezertsxs.com\/products\/kfi-cfmoto-zforce-500-800-1000-utv-plow-mount","provider":"Dunes 2 Dezert SXS","version":"1.0","type":"link"}