{"product_id":"elektric-offroad-can-am-maverick-r-radius-rods-clear","title":"Elektric Off Road Can-Am Maverick R Radius Rods Clear (2024+)","description":"\u003cp\u003e\u003cstrong\u003eElektric Off Road High Clearance Radius Rods replace the factory rear radius rods on the 2024-2026 Can-Am Maverick R with adjustable 6061 billet aluminum rods that sit higher, out of the way of rocks and ledges.\u003c\/strong\u003e Adjustable heim joints let you set toe and alignment for your lift and terrain. This is the anodized clear version, which leaves the machined billet surface visible.\u003c\/p\u003e\n\u003cp\u003eElektric says the stock radius rods were engineered \"for the middle of the road,\" not for riders pushing hard through rock gardens, rutted two-tracks and fast desert runs. The raised profile keeps the rods tucked away from obstacles that tag factory rods. A double shear middle link spindle mount spreads the load across two contact points for less flex and wear.\u003c\/p\u003e\n\u003cp\u003eIf you are comparing Maverick R radius rods, these Can-Am Maverick R radius rods are a high clearance, adjustable design. The Maverick R high clearance radius rods use billet construction and adjustable radius rods ends, so Maverick R heim joints can be set for your build. They are a full Maverick R rear suspension upgrade and part of a broader Can-Am Maverick R suspension refresh. Like other UTV radius rods from Elektric, these Maverick R billet radius rods come in black or clear; this listing covers the Maverick R clear radius rods.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-strength 6061 billet aluminum, lighter and stronger than stock per Elektric\u003c\/li\u003e\n\u003cli\u003eAdjustable heim joints for toe and alignment control\u003c\/li\u003e\n\u003cli\u003eHigh clearance profile tucks the rods away from rocks, ledges and debris\u003c\/li\u003e\n\u003cli\u003eDouble shear middle link spindle mount shares load across two contact points\u003c\/li\u003e\n\u003cli\u003eRemovable brush shield protects the heim joints on tight, brushy trails\u003c\/li\u003e\n\u003cli\u003eAnodized clear finish: harder than paint, more corrosion resistant than bare aluminum\u003c\/li\u003e\n\u003cli\u003eDirect bolt-in installation with hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Low Factory Radius Rods on the Can-Am Maverick R\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFactory rods hanging low enough to get tagged by rocks and ledges, sending impacts through the rear end\u003c\/li\u003e\n\u003cli\u003eNo real adjustment for toe and alignment after a lift or setup change\u003c\/li\u003e\n\u003cli\u003eSingle shear spindle connections that flex and wear under hard cornering and impacts\u003c\/li\u003e\n\u003cli\u003eBrush and debris fouling exposed rod ends on tight trails\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Maverick R Owners Running Rocks, Ruts and Fast Desert\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2024-2026 Can-Am Maverick R owners who drive rock gardens, rutted two-tracks and high-speed desert\u003c\/li\u003e\n\u003cli\u003eBuilds running a suspension lift that need adjustable rear geometry\u003c\/li\u003e\n\u003cli\u003eRiders who want the clear anodized look (a black anodized version is also available)\u003c\/li\u003e\n\u003cli\u003eOwners pairing radius rods with a radius rod plate for full rear protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFitment: 2024-2026 Can-Am Maverick R\u003c\/li\u003e\n\u003cli\u003eMaterial: High-strength 6061 billet aluminum\u003c\/li\u003e\n\u003cli\u003eFinish: Anodized clear\u003c\/li\u003e\n\u003cli\u003eJoints: Adjustable heim joints\u003c\/li\u003e\n\u003cli\u003eSpindle mount: Double shear middle link\u003c\/li\u003e\n\u003cli\u003eBrush shield: Removable\u003c\/li\u003e\n\u003cli\u003eInstallation: Direct bolt-in, no cutting or welding\u003c\/li\u003e\n\u003cli\u003eHardware included: Yes\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: AMFBM0001-C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eElektric lists these radius rods for the 2024-2026 Can-Am Maverick R. Seat count is not specified on the Elektric product page.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2024 Can-Am Maverick R\u003c\/li\u003e\n\u003cli\u003e2025 Can-Am Maverick R\u003c\/li\u003e\n\u003cli\u003e2026 Can-Am Maverick R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitment is not guaranteed on applications that are not listed. Confirm your model year, seat count and trim before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhy upgrade the factory radius rods on a Maverick R?\u003c\/h3\u003e\n\u003cp\u003eThe stock rods sit lower and are not adjustable. These billet rods use a high clearance profile to stay out of the way of rocks and ledges, plus adjustable heim joints so you can set toe and alignment for your setup.\u003c\/p\u003e\n\u003ch3\u003eDo these radius rods help with trail damage?\u003c\/h3\u003e\n\u003cp\u003eYes. The raised profile tucks the rods away from obstacles that tag factory rods, and a removable brush shield keeps branches and debris off the heim joints on tight trails.\u003c\/p\u003e\n\u003ch3\u003eWhat years of Can-Am Maverick R do they fit?\u003c\/h3\u003e\n\u003cp\u003eElektric lists fitment for the 2024-2026 Can-Am Maverick R. Confirm your model year before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat are they made of?\u003c\/h3\u003e\n\u003cp\u003eHigh-strength 6061 billet aluminum with an anodized clear finish, adjustable heim joints and a double shear middle link spindle mount.\u003c\/p\u003e\n\u003ch3\u003eIs installation bolt-in?\u003c\/h3\u003e\n\u003cp\u003eYes. Elektric describes a straightforward bolt-in install with no custom fabrication. Pull the factory rods, install these, and make your alignment adjustments. An official install PDF is included on this listing.\u003c\/p\u003e\n\u003ch3\u003eBlack or clear: which should I choose?\u003c\/h3\u003e\n\u003cp\u003eBoth share the same construction and fitment. Black anodize gives a darker, stealthier look, and clear anodize leaves the machined billet surface visible.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy Elektric Off Road\u003c\/h2\u003e\n\u003cp\u003eElektric Off Road (Elektric Offroad Designs) builds platform-specific UTV parts, including bumpers, rock sliders, roof racks, billet sway bar links, tie rods and radius rods. They're designed around the machine they fit rather than adapted from a universal part. These radius rods were engineered around the Maverick R's geometry and mounting points.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFinish Your Maverick R Rear Suspension Upgrade\u003c\/h2\u003e\n\u003cp\u003eConfirm your model year, then think about the parts that work around new radius rods: the Elektric billet radius rod plate shields the heim joints and rod bolts, and the rear link nut plate kit stops factory nuts from spinning when you pull the rods. Plan an alignment after install.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Why upgrade the factory radius rods on a Maverick R?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The stock rods sit lower and are not adjustable. These billet rods use a high clearance profile to stay out of the way of rocks and ledges, plus adjustable heim joints so you can set toe and alignment for your setup.\"}}, {\"@type\": \"Question\", \"name\": \"Do these radius rods help with trail damage?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The raised profile tucks the rods away from obstacles that tag factory rods, and a removable brush shield keeps branches and debris off the heim joints on tight trails.\"}}, {\"@type\": \"Question\", \"name\": \"What years of Can-Am Maverick R do they fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Elektric lists fitment for the 2024-2026 Can-Am Maverick R. Confirm your model year before ordering.\"}}, {\"@type\": \"Question\", \"name\": \"What are they made of?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"High-strength 6061 billet aluminum with an anodized clear finish, adjustable heim joints and a double shear middle link spindle mount.\"}}, {\"@type\": \"Question\", \"name\": \"Is installation bolt-in?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Elektric describes a straightforward bolt-in install with no custom fabrication. Pull the factory rods, install these, and make your alignment adjustments. An official install PDF is included on this listing.\"}}, {\"@type\": \"Question\", \"name\": \"Black or clear: which should I choose?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Both share the same construction and fitment. Black anodize gives a darker, stealthier look, and clear anodize leaves the machined billet surface visible.\"}}]}\u003c\/script\u003e","brand":"Elektric Off Road","offers":[{"title":"Default Title","offer_id":51308845072420,"sku":"AMFBM0001-C","price":1999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/335894b42156f21cb298846416e93661L.png?v=1787764364","url":"https:\/\/dunes2dezertsxs.com\/products\/elektric-offroad-can-am-maverick-r-radius-rods-clear","provider":"Dunes 2 Dezert SXS","version":"1.0","type":"link"}