{"product_id":"drt-motorsports-cfmoto-uforce-u10-pro-front-bumper","title":"DRT Motorsports CFMoto UForce U10 Pro Front Bumper (2025+)","description":"\u003cp\u003e\u003cstrong\u003eThe DRT Motorsports front bumper gives the 2025+ CFMoto UForce U10 Pro and U10 XL Pro a direct-to-frame steel U10 Pro bumper that protects the front end while keeping the factory winch and fairlead in place.\u003c\/strong\u003e It follows the OEM body lines, adds laser-cut aluminum mesh for radiator airflow, and bolts on with only minor trimming of the plastic fascia.\u003c\/p\u003e\n\u003cp\u003eThe stock U10 front end leaves the fascia and the parts behind it exposed on rocky trails, in brush and around the work site. DRT builds this CFMoto U10 front bumper from laser-cut steel that is precision formed and fully welded, then finishes it in DRT's fine sand-textured black powder coat. The mesh, solid and accent panels are laser-cut aluminum with a mil-spec bright anodized finish, and all components are included.\u003c\/p\u003e\n\u003cp\u003eShopping for a CFMoto U10 bumper or a UForce U10 front bumper? This CFMoto U10 front bumper is one of the core CFMoto U10 Pro accessories in DRT's line, and because it also fits the XL Pro it belongs on any list of U10 XL Pro accessories and CFMoto UForce U10 accessories. If you found it while searching UForce 1000 XL accessories, CFMoto UForce 1000 accessories or a CFMoto UForce 1000 XL bumper, note that DRT lists this UTV front bumper for the 2025+ U10 Pro platform only.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLaser-cut steel construction, precision formed and fully welded, to protect critical front-end components\u003c\/li\u003e\n\u003cli\u003eWorks with the factory winch and fairlead, so the OEM winch setup stays in place\u003c\/li\u003e\n\u003cli\u003eIntegrated laser-cut aluminum mesh panels keep air moving through the radiator area\u003c\/li\u003e\n\u003cli\u003eSolid aluminum panels and a DRT logo backing plate add contrast detailing\u003c\/li\u003e\n\u003cli\u003eDirect-to-frame mounting with bolt-on installation and minor trimming of the plastic fascia\u003c\/li\u003e\n\u003cli\u003eDRT fine sand-textured black powder coat; aluminum panels in mil-spec bright anodized finish for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eComponents can be customized with paint or powder coat to match your build\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: CFMoto UForce U10 Pro Front-End Damage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAn exposed stock front fascia that takes hits from rocks, stumps and brush\u003c\/li\u003e\n\u003cli\u003eAftermarket bumpers that force you to give up or relocate the factory winch and fairlead\u003c\/li\u003e\n\u003cli\u003eSolid bumper faces that block airflow to the radiator area\u003c\/li\u003e\n\u003cli\u003eA front end that does not match the OEM body lines once a bumper is added\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: U10 Pro and U10 XL Pro Owners Who Work and Ride Hard\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2025+ CFMoto UForce U10 Pro and U10 XL Pro owners who want steel front-end protection\u003c\/li\u003e\n\u003cli\u003eRiders who already run the factory winch and want to keep it\u003c\/li\u003e\n\u003cli\u003eRanch, property and work-site machines that push through brush and tight trails\u003c\/li\u003e\n\u003cli\u003eOwners building a matching DRT setup with the U10 Pro rear bumper, light mounts or bed rack\u003c\/li\u003e\n\u003cli\u003eBuyers who plan to paint or powder coat the bumper to match their machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: DRT Motorsports\u003c\/li\u003e\n\u003cli\u003eProduct type: Front bumper, direct-to-frame mount\u003c\/li\u003e\n\u003cli\u003eBumper material: Laser-cut steel, precision formed and fully welded\u003c\/li\u003e\n\u003cli\u003eBumper finish: DRT fine sand-textured black powder coat\u003c\/li\u003e\n\u003cli\u003ePanels: Laser-cut aluminum mesh, solid and accent panels\u003c\/li\u003e\n\u003cli\u003ePanel finish: Mil-spec bright anodized\u003c\/li\u003e\n\u003cli\u003eWinch compatibility: Works with the factory winch and fairlead\u003c\/li\u003e\n\u003cli\u003eInstallation: Bolt-on with minor trimming of the plastic fascia; all components included\u003c\/li\u003e\n\u003cli\u003eStatus: Patent pending\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 80105FB01101\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eFits 2025+ CFMoto UForce U10 Pro models. DRT lists the application as 2025+ CFMOTO U10 Pro (All Models) and describes the bumper as fitting the U10 and XL Pro.\u003c\/p\u003e\n\u003cp\u003eDRT does not list earlier CFMoto UForce 1000 or UForce 1000 XL models. Fitment is not guaranteed on unlisted applications, so confirm your year and model before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes this CFMoto U10 front bumper work with the factory winch?\u003c\/h3\u003e\n\u003cp\u003eYes. DRT states the bumper works with the factory winch and fairlead, so you can keep the OEM winch setup in place.\u003c\/p\u003e\n\u003ch3\u003eWhat problem does the DRT U10 Pro bumper solve?\u003c\/h3\u003e\n\u003cp\u003eIt replaces an exposed stock front end with laser-cut, fully welded steel that protects critical front-end components on trails and work sites.\u003c\/p\u003e\n\u003ch3\u003eWill the bumper block airflow to the radiator?\u003c\/h3\u003e\n\u003cp\u003eDRT builds integrated laser-cut aluminum mesh panels into the bumper to maintain airflow through the radiator area.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the UForce U10 XL Pro?\u003c\/h3\u003e\n\u003cp\u003eDRT describes the bumper as fitting 2025+ CFMoto U10 and XL Pro models and lists the application as 2025+ U10 Pro (All Models). Earlier UForce 1000 models are not listed.\u003c\/p\u003e\n\u003ch3\u003eIs installation bolt-on?\u003c\/h3\u003e\n\u003cp\u003eYes. The bumper mounts direct to the frame and installs bolt-on, with minor trimming of the plastic fascia. All components are included.\u003c\/p\u003e\n\u003ch3\u003eHow is this different from the DRT U10 Pro rear bumper?\u003c\/h3\u003e\n\u003cp\u003eThis is the front bumper. DRT also makes a separate rear bumper for the U10 Pro, and the two can be paired for front and rear coverage.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy DRT Motorsports\u003c\/h2\u003e\n\u003cp\u003eDRT Motorsports designs UTV armor, suspension and accessories for specific machines, and this bumper follows the U10's OEM body lines rather than forcing a generic fit. It uses DRT's own sand-textured powder coat and anodized aluminum panels, and it is patent pending.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eComplete Your CFMoto U10 Pro Front-End Setup\u003c\/h2\u003e\n\u003cp\u003eConfirm you have a 2025+ UForce U10 Pro or U10 XL Pro, then plan for the minor fascia trim at install. If you are building out the machine, pair this front bumper with the DRT U10 Pro rear bumper, light mounts, bed rack and door mirror mounting kit for a matched DRT front-to-rear setup.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does this CFMoto U10 front bumper work with the factory winch?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. DRT states the bumper works with the factory winch and fairlead, so you can keep the OEM winch setup in place.\"}}, {\"@type\": \"Question\", \"name\": \"What problem does the DRT U10 Pro bumper solve?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It replaces an exposed stock front end with laser-cut, fully welded steel that protects critical front-end components on trails and work sites.\"}}, {\"@type\": \"Question\", \"name\": \"Will the bumper block airflow to the radiator?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"DRT builds integrated laser-cut aluminum mesh panels into the bumper to maintain airflow through the radiator area.\"}}, {\"@type\": \"Question\", \"name\": \"Does it fit the UForce U10 XL Pro?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"DRT describes the bumper as fitting 2025+ CFMoto U10 and XL Pro models and lists the application as 2025+ U10 Pro (All Models). Earlier UForce 1000 models are not listed.\"}}, {\"@type\": \"Question\", \"name\": \"Is installation bolt-on?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The bumper mounts direct to the frame and installs bolt-on, with minor trimming of the plastic fascia. All components are included.\"}}, {\"@type\": \"Question\", \"name\": \"How is this different from the DRT U10 Pro rear bumper?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the front bumper. DRT also makes a separate rear bumper for the U10 Pro, and the two can be paired for front and rear coverage.\"}}]}\u003c\/script\u003e","brand":"DRT Motorsports","offers":[{"title":"Default Title","offer_id":68106690920484,"sku":"80105FB01101","price":540.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/80105FB01101_FrontBumper_1.jpg?v=1794523643","url":"https:\/\/dunes2dezertsxs.com\/products\/drt-motorsports-cfmoto-uforce-u10-pro-front-bumper","provider":"Dunes 2 Dezert SXS","version":"1.0","type":"link"}