{"product_id":"camso-kawasaki-mule-4010-4x4-track-systems-2011-2025","title":"Camso Kawasaki Mule 4010 4x4 Track Systems (2011-2025)","description":"\u003cp\u003e\u003cstrong\u003eThe Camso UTV 4S1 track kit for the 2011-2025 Kawasaki Mule 4010 4x4 replaces all four wheels with rubber track systems so your machine keeps moving through deep snow instead of digging in.\u003c\/strong\u003e It ships as four track systems (two front, two rear) plus the adapted mount kit Camso specifies for this vehicle, putting about 2,520 sq. in. of track on the ground for flotation and traction.\u003c\/p\u003e\u003cp\u003eIf you are shopping for Kawasaki Mule 4010 tracks or Kawasaki Mule tracks, this is the kit Camso lists for the Kawasaki Mule 4010 4x4. Like all Camso side by side tracks, it is sold as a complete set of four track systems, not individual tracks.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCamso UTV 4S1 system built for side-by-sides from 400 to 1000cc, matched to the Kawasaki Mule 4010 4x4 by an adapted mount kit\u003c\/li\u003e\n\u003cli\u003eInternal-drive track systems on a carbon steel frame\u003c\/li\u003e\n\u003cli\u003eApprox. 2,520 sq. in. contact patch with 1.125 in lugs front and rear\u003c\/li\u003e\n\u003cli\u003eWider rear tracks (14 in) than front tracks (12.5 in)\u003c\/li\u003e\n\u003cli\u003eCamso rates the UTV 4S1 to climb 20° hills in deep snow, haul up to 1,000 lb of supplies or feed in deep snow, and tow a 2,500 lb shack at up to 15 MPH across ice and snow\u003c\/li\u003e\n\u003cli\u003eBacked by a 2-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eBuilt To Solve: Mule 4010 Snow Traction\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTires that dig in and high-center the machine in deep or drifted snow\u003c\/li\u003e\n\u003cli\u003eLost access to the cabin, fishing spot, feed lot or back acreage once the snow piles up\u003c\/li\u003e\n\u003cli\u003eWheel spin on packed snow and ice when you are hauling a load\u003c\/li\u003e\n\u003cli\u003eLow ground clearance under the chassis on snow-covered trails\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eBest For: Mule 4010 Owners Who Ride Through Winter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eKawasaki Mule 4010 owners who need the machine to work in deep snow, not just on cleared ground\u003c\/li\u003e\n\u003cli\u003eOwners who keep using the machine through winter: hunting, ice fishing, caring for land, or reaching a remote cabin\u003c\/li\u003e\n\u003cli\u003eRiders who have confirmed their exact Kawasaki model, trim and year against the fitment list below\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTrack system: Camso UTV 4S1\u003c\/li\u003e\n\u003cli\u003eDrive type: Internal drive\u003c\/li\u003e\n\u003cli\u003eSprocket: 15 to 18 teeth\u003c\/li\u003e\n\u003cli\u003eFrame: Carbon steel\u003c\/li\u003e\n\u003cli\u003eTrack width: Front 12.5 in \/ Rear 14 in\u003c\/li\u003e\n\u003cli\u003eTrack length: Front 98.5 in \/ Rear 116.7 in\u003c\/li\u003e\n\u003cli\u003eLug height: 1.125 in front and rear\u003c\/li\u003e\n\u003cli\u003eWeight per track system: Front 103 lb \/ Rear 120 lb\u003c\/li\u003e\n\u003cli\u003eGround clearance: Front 16 3\/8 in \/ Rear 16 1\/2 in\u003c\/li\u003e\n\u003cli\u003eContact patch: Approx. 2,520 sq. in.\u003c\/li\u003e\n\u003cli\u003eIncluded: 4 track systems (2 front, 2 rear) and the adapted mount kit for the listed vehicle\u003c\/li\u003e\n\u003cli\u003eWarranty: 2-year limited warranty\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 6522-04-1130\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKawasaki 620 KAF M \/ R Mule 4010 4x4 \/ SE \/ FE\u003c\/strong\u003e (2011-2025)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKawasaki 620 KAF Mule 4010 4x4 Trans \/ SE \/ FE \/ Camo\u003c\/strong\u003e (2011-2025)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKawasaki 953 KAF M \/ R Mule 4010 (diesel)\u003c\/strong\u003e (2011-2013)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKawasaki 953 KAF Mule 4010 4x4 Trans \/ SE (diesel)\u003c\/strong\u003e (2011-2013)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamso installation notes for this application:\u003c\/strong\u003e some body parts must be temporarily removed during installation.\u003c\/p\u003e\u003cp\u003eFitment is taken from Camso's own vehicle application data. Fitment is not guaranteed on unlisted models, trims or years. Installing a track system will change your vehicle's length, width and ground clearance due to the tracks' offset.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWill Camso tracks keep my Kawasaki Mule 4010 4x4 from getting stuck in deep snow?\u003c\/h3\u003e\u003cp\u003eThey spread the machine's weight over about 2,520 sq. in. of rubber track instead of four tire contact patches, which gives far more flotation and traction in deep snow than stock tires. Driving style, snow conditions and load still matter, so no track kit makes a machine unstoppable.\u003c\/p\u003e\u003ch3\u003eCan I haul and tow with this track kit on my Kawasaki Mule 4010 4x4?\u003c\/h3\u003e\u003cp\u003eCamso rates the UTV 4S1 to haul up to 1,000 lb of supplies or feed in deep snow and to tow a 2,500 lb shack at up to 15 MPH across ice and snow. Always stay within your Kawasaki Mule 4010 4x4's own payload and towing ratings.\u003c\/p\u003e\u003ch3\u003eWhich Kawasaki models and years does this kit fit?\u003c\/h3\u003e\u003cp\u003eCamso lists this kit for: Kawasaki 620 KAF M \/ R Mule 4010 4x4 \/ SE \/ FE (2011-2025); Kawasaki 620 KAF Mule 4010 4x4 Trans \/ SE \/ FE \/ Camo (2011-2025); Kawasaki 953 KAF M \/ R Mule 4010 (diesel) (2011-2013); Kawasaki 953 KAF Mule 4010 4x4 Trans \/ SE (diesel) (2011-2013). Confirm your exact model, trim and year before ordering.\u003c\/p\u003e\u003ch3\u003eWhat comes in the box?\u003c\/h3\u003e\u003cp\u003eFour Camso UTV 4S1 track systems (two front, two rear) and the adapted mount kit Camso specifies for the listed vehicle.\u003c\/p\u003e\u003ch3\u003eIs installation difficult, and are modifications needed?\u003c\/h3\u003e\u003cp\u003eThe kit includes the adapted mount kit Camso specifies for this vehicle, and the official Camso installation video below walks through the process. For this application Camso notes that some body parts must be temporarily removed during installation.\u003c\/p\u003e\u003ch3\u003eShould I choose the UTV 4S1, X4S or ENDUR?\u003c\/h3\u003e\u003cp\u003eCamso positions the X4S for ATVs and mid-size side-by-sides from 400 to 700cc, the UTV 4S1 for side-by-sides from 400 to 1000cc, and the ENDUR for larger side-by-sides of 1000cc and more. The right system is the one Camso lists for your exact vehicle, which for this listing is the UTV 4S1.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eWhy Camso\u003c\/h2\u003e\u003cp\u003eCamso builds rubber track systems for ATVs, side-by-sides and snowmobiles, and every Camso UTV 4S1 kit includes the adapted mount kit Camso specifies for the Kawasaki Mule 4010 4x4. Every kit carries a 2-year limited warranty, and Camso publishes owner's manuals, installation guides and maintenance information for its track systems.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eComplete Your Mule 4010 Winter Track Setup\u003c\/h2\u003e\u003cp\u003eBefore ordering this Camso UTV 4S1 track kit, confirm your Kawasaki Mule 4010 4x4 year, trim and the fitment notes above (some body parts must be temporarily removed during installation). Browse all \u003ca href=\"\/collections\/track-systems\"\u003eUTV track systems\u003c\/a\u003e if your machine is not listed here, and plan your install with the official Camso installation video below. Order from Dunes 2 Dezert SXS and we will ship it to you.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eInstallation Video\u003c\/h2\u003e\u003cdiv class=\"video-embed\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/jHPQZwLWOkQ\" title=\"How to install Camso track systems\" frameborder=\"0\" allowfullscreen loading=\"lazy\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@graph\": [{\"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will Camso tracks keep my Kawasaki Mule 4010 4x4 from getting stuck in deep snow?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They spread the machine's weight over about 2,520 sq. in. of rubber track instead of four tire contact patches, which gives far more flotation and traction in deep snow than stock tires. Driving style, snow conditions and load still matter, so no track kit makes a machine unstoppable.\"}}, {\"@type\": \"Question\", \"name\": \"Can I haul and tow with this track kit on my Kawasaki Mule 4010 4x4?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Camso rates the UTV 4S1 to haul up to 1,000 lb of supplies or feed in deep snow and to tow a 2,500 lb shack at up to 15 MPH across ice and snow. Always stay within your Kawasaki Mule 4010 4x4's own payload and towing ratings.\"}}, {\"@type\": \"Question\", \"name\": \"Which Kawasaki models and years does this kit fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Camso lists this kit for: Kawasaki 620 KAF M \/ R Mule 4010 4x4 \/ SE \/ FE (2011-2025); Kawasaki 620 KAF Mule 4010 4x4 Trans \/ SE \/ FE \/ Camo (2011-2025); Kawasaki 953 KAF M \/ R Mule 4010 (diesel) (2011-2013); Kawasaki 953 KAF Mule 4010 4x4 Trans \/ SE (diesel) (2011-2013). Confirm your exact model, trim and year before ordering.\"}}, {\"@type\": \"Question\", \"name\": \"What comes in the box?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Four Camso UTV 4S1 track systems (two front, two rear) and the adapted mount kit Camso specifies for the listed vehicle.\"}}, {\"@type\": \"Question\", \"name\": \"Is installation difficult, and are modifications needed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit includes the adapted mount kit Camso specifies for this vehicle, and the official Camso installation video below walks through the process. For this application Camso notes that some body parts must be temporarily removed during installation.\"}}, {\"@type\": \"Question\", \"name\": \"Should I choose the UTV 4S1, X4S or ENDUR?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Camso positions the X4S for ATVs and mid-size side-by-sides from 400 to 700cc, the UTV 4S1 for side-by-sides from 400 to 1000cc, and the ENDUR for larger side-by-sides of 1000cc and more. The right system is the one Camso lists for your exact vehicle, which for this listing is the UTV 4S1.\"}}]}, {\"@type\": \"VideoObject\", \"name\": \"How to install Camso track systems\", \"description\": \"Official Camso video showing how to install Camso track systems.\", \"thumbnailUrl\": \"https:\/\/i.ytimg.com\/vi\/jHPQZwLWOkQ\/hqdefault.jpg\", \"embedUrl\": \"https:\/\/www.youtube.com\/embed\/jHPQZwLWOkQ\", \"contentUrl\": \"https:\/\/www.youtube.com\/watch?v=jHPQZwLWOkQ\", \"uploadDate\": \"2025-09-29\"}]}\u003c\/script\u003e","brand":"CAMSO","offers":[{"title":"Default Title","offer_id":67602521915428,"sku":"6522-04-1130","price":6599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/0800-5c741aff6ad75_7a9f1e90-5b2e-41d4-8fe2-43b31cc44a05.jpg?v=1791166918","url":"https:\/\/dunes2dezertsxs.com\/products\/camso-kawasaki-mule-4010-4x4-track-systems-2011-2025","provider":"Dunes 2 Dezert SXS","version":"1.0","type":"link"}