{"title":"Snow Plow Accessories","description":"","products":[{"product_id":"kfi-hydraulic-actuator-wire-harness-dash-rocker-switch-kit","title":"KFI Hydraulic Actuator Wire Harness \u0026 Dash Rocker Switch Kit","description":"\u003cp\u003e\u003cstrong\u003eThe KFI hydraulic actuator wire harness is the complete wiring kit to run a KFI ACT203 plow actuator from a dash switch.\u003c\/strong\u003e It includes the ACT-HAR relay harness and a blue LED-illuminated Carling Technologies two-way dash rocker switch, and it replaces KFI 105940.\u003c\/p\u003e\n\u003cp\u003eFlip the switch to angle the blade left or right without leaving the seat.\u003c\/p\u003e\n\u003cp\u003eThis harness powers the KFI plow actuator (KFI actuator ACT203), the UTV plow actuator behind UTV plow power angle; its relay harness is the part a plow actuator relay plugs into. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComplete wiring kit for the KFI ACT203 hydraulic actuator\u003c\/li\u003e\n\u003cli\u003eCarling Technologies two-way dash rocker switch, blue LED illuminated\u003c\/li\u003e\n\u003cli\u003eIncludes the ACT-HAR actuator main relay harness\u003c\/li\u003e\n\u003cli\u003eReplaces KFI part 105940\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Wiring a KFI Plow Actuator\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo switch to run a new actuator\u003c\/li\u003e\n\u003cli\u003eA damaged or corroded actuator harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: KFI Power-Angle Plow Owners\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners installing an ACT203\u003c\/li\u003e\n\u003cli\u003eOwners replacing a 105940 harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: actuator wire harness and switch kit\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eIncluded: ACT-HAR relay harness and ACT-BLDRS-K dash rocker switch\u003c\/li\u003e\n\u003cli\u003eSwitch: Carling two-way rocker, blue LED\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106940\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI ACT203 hydraulic actuator (and possibly others, per KFI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKFI's instructions say to drill a mounting hole for the relays if required. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat does it fit?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for the KFI ACT203 actuator.\u003c\/p\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eThe ACT-HAR relay harness and a Carling two-way dash rocker switch.\u003c\/p\u003e\n\u003ch3\u003eDoes it replace 105940?\u003c\/h3\u003e\n\u003cp\u003eYes, KFI lists it as the replacement for 105940.\u003c\/p\u003e\n\u003ch3\u003eCan I add a hand remote?\u003c\/h3\u003e\n\u003cp\u003eFor a hand remote setup, KFI sells the 106950 hand remote kit.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 106940, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWire Up Your KFI Plow Actuator\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI actuator wire harness and switch with your ACT203. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does it fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is designed for the KFI ACT203 actuator.\"}}, {\"@type\": \"Question\", \"name\": \"What is included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The ACT-HAR relay harness and a Carling two-way dash rocker switch.\"}}, {\"@type\": \"Question\", \"name\": \"Does it replace 105940?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, KFI lists it as the replacement for 105940.\"}}, {\"@type\": \"Question\", \"name\": \"Can I add a hand remote?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"For a hand remote setup, KFI sells the 106950 hand remote kit.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 106940, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734527479844,"sku":"106940","price":111.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/3269-686ea74013d3f.jpg?v=1760944891"},{"product_id":"kfi-pro-2-0-utv-plow-push-tube-square-tube-front-mount","title":"KFI Pro 2.0 UTV Plow Push Tube, Square Tube Front Mount","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Pro 2.0 UTV push tube is the frame that connects a KFI blade to the plow mount on your UTV, with 30-plus inches of lift and 25 degrees of blade angle.\u003c\/strong\u003e It is KFI's current square-tube design: 2.5 inches longer than the old round tube, made in the USA, and it works with all KFI plow blades.\u003c\/p\u003e\n\u003cp\u003eEvery KFI UTV plow uses three pieces: a vehicle-specific mount, this push tube and a blade. Pick the mount for your machine, add a blade, and use a winch to raise the plow.\u003c\/p\u003e\n\u003cp\u003eThis KFI push tube is the plow push tube for UTV setups across the KFI line, so a UTV snow plow push tube search or UTV plow push tube search lands on the same part: the middle piece of every KFI UTV snow plow kit or UTV plow kit. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront mount design with 30-plus inches of lift height\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 1-1\/2-inch 12-gauge square steel tubing\u003c\/li\u003e\n\u003cli\u003e1\/4-inch thick, 1-1\/2-inch diameter grade 50 pivot bushings\u003c\/li\u003e\n\u003cli\u003e6-inch diameter injection-molded POM rotator bushing\u003c\/li\u003e\n\u003cli\u003eEasy-pull pin blade angle adjustment: 3 positions that rotate the blade up to 25 degrees\u003c\/li\u003e\n\u003cli\u003e6 five-degree blade pitch adjustments and a multi-position lift bracket\u003c\/li\u003e\n\u003cli\u003eBead blasted, powder coated black; hardware and instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA with a 2-year KFI warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Connecting a KFI Blade to Your UTV Plow Mount\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo way to attach a plow blade to the mount on your machine\u003c\/li\u003e\n\u003cli\u003eBlades that cannot angle or pitch for the job\u003c\/li\u003e\n\u003cli\u003eA worn or bent push tube from an older plow setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: UTV Owners Building a KFI Plow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUTV owners building a complete KFI plow: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners upgrading from the discontinued round 105635 tube to the square Pro 2.0 tube\u003c\/li\u003e\n\u003cli\u003eOwners who want leveling kits, track extensions and actuators to bolt on easily\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV plow push tube (Pro 2.0, square tube)\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eTubing: 1-1\/2-inch 12-gauge square steel\u003c\/li\u003e\n\u003cli\u003ePivot bushings: 1\/4-inch thick, 1-1\/2-inch diameter grade 50\u003c\/li\u003e\n\u003cli\u003eRotator bushing: 6-inch POM\u003c\/li\u003e\n\u003cli\u003eBlade angle: 3 positions, up to 25 degrees\u003c\/li\u003e\n\u003cli\u003eBlade pitch: 6 positions in 5-degree steps\u003c\/li\u003e\n\u003cli\u003eLift height: 30-plus inches\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 years (KFI)\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106300\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll KFI plow blades (Pro-S steel and Pro-Poly)\u003c\/li\u003e\n\u003cli\u003eKFI vehicle-specific UTV front plow mounts\u003c\/li\u003e\n\u003cli\u003eKFI Pro 2.0 accessories: leveling kits 106320 \/ 106322 \/ 106324 \/ 106326, 2-inch forward kit 106340, track extension 106330, actuator brackets 106305\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe push tube pins to your vehicle-specific KFI plow mount, sold separately with the blade and winch. Modified machines may need a KFI leveling kit to keep the blade level. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat do I need with the push tube?\u003c\/h3\u003e\n\u003cp\u003eA KFI plow mount for your UTV, a KFI blade, and a winch to lift the plow. A plow pulley or strap helps the winch line.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit every KFI blade?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI says the Pro 2.0 tube works with all KFI plows.\u003c\/p\u003e\n\u003ch3\u003eHow is it different from the old round tube?\u003c\/h3\u003e\n\u003cp\u003eThe Pro 2.0 is square tube, 2.5 inches longer, and built for easier installation of KFI plow accessories. The round 105635 tube is discontinued.\u003c\/p\u003e\n\u003ch3\u003eHow far does the blade angle?\u003c\/h3\u003e\n\u003cp\u003eThree angle positions rotate the blade up to 25 degrees, and the pitch adjusts in six 5-degree steps.\u003c\/p\u003e\n\u003ch3\u003eCan I add power angle later?\u003c\/h3\u003e\n\u003cp\u003eYes. Add the KFI 106305 actuator bracket kit and ACT203 actuator to angle the blade from the seat.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eComplete Your KFI UTV Plow With the Pro 2.0 Push Tube\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Pro 2.0 push tube, then add the mount for your machine and a blade from the related products below. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What do I need with the push tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A KFI plow mount for your UTV, a KFI blade, and a winch to lift the plow. A plow pulley or strap helps the winch line.\"}}, {\"@type\": \"Question\", \"name\": \"Does it fit every KFI blade?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI says the Pro 2.0 tube works with all KFI plows.\"}}, {\"@type\": \"Question\", \"name\": \"How is it different from the old round tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The Pro 2.0 is square tube, 2.5 inches longer, and built for easier installation of KFI plow accessories. The round 105635 tube is discontinued.\"}}, {\"@type\": \"Question\", \"name\": \"How far does the blade angle?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Three angle positions rotate the blade up to 25 degrees, and the pitch adjusts in six 5-degree steps.\"}}, {\"@type\": \"Question\", \"name\": \"Can I add power angle later?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Add the KFI 106305 actuator bracket kit and ACT203 actuator to angle the blade from the seat.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734527512612,"sku":"106300","price":310.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/507434c3e3593e84ba9c45ec5b9906d7.png?v=1765176174"},{"product_id":"kfi-pro-2-0-utv-push-tube-track-extension-actuator-bracket-kit","title":"KFI Pro 2.0 UTV Push Tube Track Extension Actuator Bracket Kit","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Pro 2.0 track extension actuator bracket kit lets you angle your KFI plow from the seat with the ACT203 hydraulic actuator.\u003c\/strong\u003e It is the bracket set for running a KFI ACT203 actuator on a 106300 push tube fitted with the 106330 track extension. The tube, extension and actuator are sold separately.\u003c\/p\u003e\n\u003cp\u003ePower angle means no more climbing out to pull a pin every time you change direction. Add the actuator, the brackets and a switch or hand remote.\u003c\/p\u003e\n\u003cp\u003eThese brackets are how UTV plow power angle gets onto a KFI push tube: they hold the KFI plow actuator (KFI actuator ACT203), a UTV plow actuator also searched as a UTV plow angle actuator. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMounts the ACT203 actuator on a 106300 tube with the 106330 track extension\u003c\/li\u003e\n\u003cli\u003eRequires track extension 106330\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware included\u003c\/li\u003e\n\u003cli\u003ePowder coated\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Angling the Plow Without Leaving the Seat\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClimbing out to pull the angle pin on every pass\u003c\/li\u003e\n\u003cli\u003eNo mounting point for a hydraulic actuator on the push tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: KFI Pro 2.0 Owners Adding Power Angle\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners converting a manual KFI plow to power angle\u003c\/li\u003e\n\u003cli\u003eOwners clearing long driveways and lots\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: actuator bracket kit\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eIncluded: actuator cradle bracket, rear actuator bracket, flat cradle keeper, lift latch stop, track extension spacer and hardware kit HK-406\u003c\/li\u003e\n\u003cli\u003eNot included: push tube 106300, actuator ACT203, track extension 106330\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106335\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI Pro 2.0 push tube 106300\u003c\/li\u003e\n\u003cli\u003eKFI track extension 106330 (required)\u003c\/li\u003e\n\u003cli\u003eKFI ACT203 hydraulic actuator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDrilling: Yes. KFI lists drilling as required; the instructions drill the rear-most cradle keeper holes through the track extension and push tube with a 13\/32-inch bit where needed. You also need a control: wire harness 106940 (dash switch) or hand remote kit 106950. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat else do I need for power angle?\u003c\/h3\u003e\n\u003cp\u003eThe KFI ACT203 actuator and a control: the 106940 dash switch harness or the 106950 hand remote kit.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI lists drilling as required; the instructions drill the rear-most cradle keeper holes through the track extension and push tube with a 13\/32-inch bit where needed.\u003c\/p\u003e\n\u003ch3\u003eIs the actuator included?\u003c\/h3\u003e\n\u003cp\u003eNo. The ACT203 actuator and the push tube are sold separately.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the round 105635 tube?\u003c\/h3\u003e\n\u003cp\u003eNo. It is designed for the square Pro 2.0 106300 tube.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 106335, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAdd Power Angle to Your KFI Pro 2.0 Plow\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI track extension actuator bracket kit, plus the ACT203 actuator and a switch or hand remote if you do not have them. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What else do I need for power angle?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The KFI ACT203 actuator and a control: the 106940 dash switch harness or the 106950 hand remote kit.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI lists drilling as required; the instructions drill the rear-most cradle keeper holes through the track extension and push tube with a 13\/32-inch bit where needed.\"}}, {\"@type\": \"Question\", \"name\": \"Is the actuator included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. The ACT203 actuator and the push tube are sold separately.\"}}, {\"@type\": \"Question\", \"name\": \"Does it fit the round 105635 tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It is designed for the square Pro 2.0 106300 tube.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 106335, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734527610916,"sku":"106335","price":113.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/48b4e7fa134b6f058f4924ea71fdf392.png?v=1765175759"},{"product_id":"kfi-pro-2-0-utv-push-tube-actuator-bracket-kit","title":"KFI Pro 2.0 UTV Push Tube Actuator Bracket Kit","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Pro 2.0 actuator bracket kit lets you angle your KFI plow from the seat with the ACT203 hydraulic actuator.\u003c\/strong\u003e It is the bracket set that holds a KFI ACT203 hydraulic actuator on the square 106300 push tube. The tube and actuator are sold separately.\u003c\/p\u003e\n\u003cp\u003ePower angle means no more climbing out to pull a pin every time you change direction. Add the actuator, the brackets and a switch or hand remote.\u003c\/p\u003e\n\u003cp\u003eThese brackets are how UTV plow power angle gets onto a KFI push tube: they hold the KFI plow actuator (KFI actuator ACT203), a UTV plow actuator also searched as a UTV plow angle actuator. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMounts the KFI ACT203 hydraulic actuator on the Pro 2.0 106300 push tube\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware included\u003c\/li\u003e\n\u003cli\u003ePowder coated\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Angling the Plow Without Leaving the Seat\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClimbing out to pull the angle pin on every pass\u003c\/li\u003e\n\u003cli\u003eNo mounting point for a hydraulic actuator on the push tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: KFI Pro 2.0 Owners Adding Power Angle\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners converting a manual KFI plow to power angle\u003c\/li\u003e\n\u003cli\u003eOwners clearing long driveways and lots\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: actuator bracket kit\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eIncluded: cradle bracket, backer plate, rear tube bracket, flat cradle keeper, lift latch stop and hardware kit HK-404\u003c\/li\u003e\n\u003cli\u003eNot included: push tube 106300, actuator ACT203\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106305\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI Pro 2.0 push tube 106300\u003c\/li\u003e\n\u003cli\u003eKFI ACT203 hydraulic actuator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDrilling: Yes. KFI lists drilling as required; the instructions drill the rear-most cradle keeper holes through the push tube bulkhead with a 13\/32-inch bit where needed. You also need a control: wire harness 106940 (dash switch) or hand remote kit 106950. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat else do I need for power angle?\u003c\/h3\u003e\n\u003cp\u003eThe KFI ACT203 actuator and a control: the 106940 dash switch harness or the 106950 hand remote kit.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI lists drilling as required; the instructions drill the rear-most cradle keeper holes through the push tube bulkhead with a 13\/32-inch bit where needed.\u003c\/p\u003e\n\u003ch3\u003eIs the actuator included?\u003c\/h3\u003e\n\u003cp\u003eNo. The ACT203 actuator and the push tube are sold separately.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the round 105635 tube?\u003c\/h3\u003e\n\u003cp\u003eNo. It is designed for the square Pro 2.0 106300 tube.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 106305, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAdd Power Angle to Your KFI Pro 2.0 Plow\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI actuator bracket kit, plus the ACT203 actuator and a switch or hand remote if you do not have them. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What else do I need for power angle?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The KFI ACT203 actuator and a control: the 106940 dash switch harness or the 106950 hand remote kit.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI lists drilling as required; the instructions drill the rear-most cradle keeper holes through the push tube bulkhead with a 13\/32-inch bit where needed.\"}}, {\"@type\": \"Question\", \"name\": \"Is the actuator included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. The ACT203 actuator and the push tube are sold separately.\"}}, {\"@type\": \"Question\", \"name\": \"Does it fit the round 105635 tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It is designed for the square Pro 2.0 106300 tube.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 106305, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734527643684,"sku":"106305","price":103.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/c06abdb60d7e5dae9f7c8854f0010cd3.png?v=1765175523"},{"product_id":"kfi-pro-2-0-utv-push-tube-replacement-parts-kit","title":"KFI Pro 2.0 UTV Push Tube Replacement Parts Kit","description":"\u003cp\u003e\u003cstrong\u003eThe KFI UTV tube kit replaces the small parts that wear out or go missing on a Pro 2.0 106300 push tube.\u003c\/strong\u003e It includes the HK-398 and HK-400 hardware kits, a lift hook bracket, two plow springs, two pitch bushings and two 5\/8-inch hitch pins.\u003c\/p\u003e\n\u003cp\u003eIf you bought a used push tube or lost parts over the summer, this kit gets it back to complete.\u003c\/p\u003e\n\u003cp\u003eThese are KFI plow replacement parts for the square KFI push tube, the UTV plow push tube used across KFI's line. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHardware kits HK-398 and HK-400\u003c\/li\u003e\n\u003cli\u003eLift hook bracket (105138)\u003c\/li\u003e\n\u003cli\u003e2 plow springs (P800304)\u003c\/li\u003e\n\u003cli\u003e2 pitch bushings (105214)\u003c\/li\u003e\n\u003cli\u003e2 5\/8-inch hitch pins (P800259)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Missing or Worn Push Tube Parts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLost hitch pins or hardware\u003c\/li\u003e\n\u003cli\u003eWorn springs and pitch bushings\u003c\/li\u003e\n\u003cli\u003eA used push tube missing parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Pro 2.0 Push Tube Owners\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners rebuilding a 106300 tube\u003c\/li\u003e\n\u003cli\u003eOwners who bought a used KFI tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: push tube replacement parts kit\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eIncluded: HK-398, HK-400, lift hook bracket 105138, 2 springs P800304, 2 pitch bushings 105214, 2 hitch pins P800259\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106315-R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI Pro 2.0 UTV push tube 106300 (square tube)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is in the kit?\u003c\/h3\u003e\n\u003cp\u003eHardware kits HK-398 and HK-400, a lift hook bracket, two plow springs, two pitch bushings and two 5\/8-inch hitch pins.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the round tube?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for the square Pro 2.0 106300 tube.\u003c\/p\u003e\n\u003ch3\u003eCan I buy springs separately?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI sells the P800304-R plow spring on its own.\u003c\/p\u003e\n\u003ch3\u003eDoes it include the push tube?\u003c\/h3\u003e\n\u003cp\u003eNo. It is the parts kit only.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 106315-R, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eRebuild Your KFI Pro 2.0 Push Tube\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI UTV tube parts kit and get your 106300 push tube back to complete. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is in the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Hardware kits HK-398 and HK-400, a lift hook bracket, two plow springs, two pitch bushings and two 5\/8-inch hitch pins.\"}}, {\"@type\": \"Question\", \"name\": \"Does it fit the round tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for the square Pro 2.0 106300 tube.\"}}, {\"@type\": \"Question\", \"name\": \"Can I buy springs separately?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI sells the P800304-R plow spring on its own.\"}}, {\"@type\": \"Question\", \"name\": \"Does it include the push tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It is the parts kit only.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 106315-R, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734527676452,"sku":"106315-R","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/0dcef64c35c603854d51caa60f55305d.png?v=1765175210"},{"product_id":"kfi-pro-2-0-utv-push-tube-replacement-ears","title":"KFI Pro 2.0 UTV Push Tube Replacement Ears (Pair)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Pro 2.0 replacement ears are the standard pin attachment ears that connect a 106300 push tube to the plow mount.\u003c\/strong\u003e They are grade 50 steel, sold as a pair with mounting hardware, and shot blasted before powder coating.\u003c\/p\u003e\n\u003cp\u003eReplace bent or damaged ears instead of the whole push tube.\u003c\/p\u003e\n\u003cp\u003eThese are KFI plow replacement parts for the square KFI push tube only; they do not fit the round UTV plow push tube. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStandard replacement ears for the Pro 2.0 106300 push tube\u003c\/li\u003e\n\u003cli\u003eGrade 50 steel\u003c\/li\u003e\n\u003cli\u003eSet of two (both sides)\u003c\/li\u003e\n\u003cli\u003eMounting hardware included (HK-398)\u003c\/li\u003e\n\u003cli\u003eShot blasted, powder coated black\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Bent or Damaged Push Tube Ears\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEars bent from a hard hit\u003c\/li\u003e\n\u003cli\u003eWorn pin holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Pro 2.0 Push Tube Owners\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners repairing a damaged 106300 tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: push tube replacement ears\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eMaterial: grade 50 steel\u003c\/li\u003e\n\u003cli\u003eQuantity: 2\u003c\/li\u003e\n\u003cli\u003eIncluded: 2 bolt-on ears and hardware kit HK-398\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106302-R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI Pro 2.0 UTV push tube 106300 (square tube)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKFI states these do not work with the old round 105635 push tube. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDo they come as a pair?\u003c\/h3\u003e\n\u003cp\u003eYes, both sides with hardware kit HK-398.\u003c\/p\u003e\n\u003ch3\u003eDo they fit the round tube?\u003c\/h3\u003e\n\u003cp\u003eNo. They are for the square 106300 tube only.\u003c\/p\u003e\n\u003ch3\u003eDo I need these for a leveling kit?\u003c\/h3\u003e\n\u003cp\u003eNo. Leveling kits 106320-106326 include their own brackets.\u003c\/p\u003e\n\u003ch3\u003eAre they the forward kit?\u003c\/h3\u003e\n\u003cp\u003eNo. These are standard ears; the 2-inch forward ears are KFI 106340.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 106302-R, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eRepair Your KFI Pro 2.0 Push Tube\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Pro 2.0 replacement ears and get your push tube back on the mount. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Do they come as a pair?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, both sides with hardware kit HK-398.\"}}, {\"@type\": \"Question\", \"name\": \"Do they fit the round tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. They are for the square 106300 tube only.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need these for a leveling kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Leveling kits 106320-106326 include their own brackets.\"}}, {\"@type\": \"Question\", \"name\": \"Are they the forward kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. These are standard ears; the 2-inch forward ears are KFI 106340.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 106302-R, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734527709220,"sku":"106302-R","price":27.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/6d9c-62d836b6b8c65.png?v=1760944916"},{"product_id":"kfi-pro-2-0-utv-push-tube-2-inch-forward-kit","title":"KFI Pro 2.0 UTV Push Tube 2\" Forward Kit","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Pro 2.0 2-inch forward kit moves the push tube attachment point forward 2 inches, for machines that need more room between the tires and the plow at full angle.\u003c\/strong\u003e It replaces the standard pin attachment ears on the square 106300 push tube, and it is shot blasted before powder coating.\u003c\/p\u003e\n\u003cp\u003eIf the blade or tube hits the front tires when you angle the plow all the way, this is the fix.\u003c\/p\u003e\n\u003cp\u003eThis is one of the small UTV plow extensions and UTV snow plow extensions for the square KFI push tube; it does not fit the round UTV plow push tube. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMoves the push tube attachment point forward 2 inches\u003c\/li\u003e\n\u003cli\u003eIncludes 2 ears\u003c\/li\u003e\n\u003cli\u003eFor the KFI Pro 2.0 106300 square push tube\u003c\/li\u003e\n\u003cli\u003eShot blasted before powder coating\u003c\/li\u003e\n\u003cli\u003eReuse the original 106300 ear hardware, or add hardware kit HK-398\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Plow Hitting the Tires at Full Angle\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBlade or push tube contacting the front tires when angled\u003c\/li\u003e\n\u003cli\u003eLarger tires crowding the plow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Pro 2.0 Owners Needing Tire Clearance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners running larger tires\u003c\/li\u003e\n\u003cli\u003eOwners who angle the blade fully and need clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: push tube forward kit\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eOffset: 2 inches forward\u003c\/li\u003e\n\u003cli\u003eIncluded: 2 Pro 2.0 pin attachment brackets (ears)\u003c\/li\u003e\n\u003cli\u003eHardware: reuse original or HK-398\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106340\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI Pro 2.0 UTV push tube 106300 (square tube)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot for the round 105635 tube. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat does the forward kit do?\u003c\/h3\u003e\n\u003cp\u003eIt moves the push tube attachment forward 2 inches so the plow clears the tires at full angle.\u003c\/p\u003e\n\u003ch3\u003eIs hardware included?\u003c\/h3\u003e\n\u003cp\u003eThe kit is the two ears. KFI says to reuse the ear hardware from your 106300 kit, or add hardware kit HK-398.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the round tube?\u003c\/h3\u003e\n\u003cp\u003eNo. It is for the square Pro 2.0 106300 tube.\u003c\/p\u003e\n\u003ch3\u003eWill it change blade height?\u003c\/h3\u003e\n\u003cp\u003eIt is a forward kit, not a leveling kit. For height, use KFI 106320-106326.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 106340, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eGet Tire Clearance for Your KFI Pro 2.0 Plow\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Pro 2.0 2-inch forward kit if your plow touches the tires at full angle. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the forward kit do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It moves the push tube attachment forward 2 inches so the plow clears the tires at full angle.\"}}, {\"@type\": \"Question\", \"name\": \"Is hardware included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The kit is the two ears. KFI says to reuse the ear hardware from your 106300 kit, or add hardware kit HK-398.\"}}, {\"@type\": \"Question\", \"name\": \"Does it fit the round tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It is for the square Pro 2.0 106300 tube.\"}}, {\"@type\": \"Question\", \"name\": \"Will it change blade height?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is a forward kit, not a leveling kit. For height, use KFI 106320-106326.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 106340, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734527741988,"sku":"106340","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/3ea9-643e9cad0d351.jpg?v=1760944920"},{"product_id":"kfi-pro-2-0-utv-push-tube-6-inch-leveling-kit","title":"KFI Pro 2.0 UTV Push Tube 6-Inch Leveling Kit","description":"\u003cp\u003e\u003cstrong\u003eThe KFI 6-inch leveling kit raises the push tube attachment point 6 inches for tall, lifted or tracked machines, so your Pro 2.0 push tube runs level and the blade cuts flat.\u003c\/strong\u003e KFI lists it for machines that measure about 17 to 18 inches at the mount (the install sheet chart shows 16 to 18 inches), on the square Pro 2.0 106300 push tube.\u003c\/p\u003e\n\u003cp\u003eA push tube that runs uphill or downhill tips the blade, wears the cutting edge unevenly and makes the plow dig or ride up. Measure your machine first, then pick the kit that matches.\u003c\/p\u003e\n\u003cp\u003eThis UTV plow lift kit (or UTV snow plow lift, depending on what you searched) goes between the KFI push tube and the mount. It fits the square UTV plow push tube only. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e+6-inch change at the push tube attachment point\u003c\/li\u003e\n\u003cli\u003eMade for the KFI Pro 2.0 106300 square push tube\u003c\/li\u003e\n\u003cli\u003eIncluded: two 6-inch gusset plates, two spacers, two 6-inch level ears, a level kit rod and hardware kit HK-446\u003c\/li\u003e\n\u003cli\u003eReuse the ear hardware from the 106300 kit, or add hardware kit HK-398.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: A Plow Blade That Will Not Sit Level\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePush tube angled because the machine is lifted, lowered or on bigger tires\u003c\/li\u003e\n\u003cli\u003eBlade digging in at the front or riding on its top edge\u003c\/li\u003e\n\u003cli\u003eUneven cutting edge and wear bar wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Pro 2.0 Push Tube Owners on Modified or Unusual-Height UTVs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners with lift kits, oversize tires, tracks or High Lifter editions\u003c\/li\u003e\n\u003cli\u003eOwners whose machine sits low at the mount\u003c\/li\u003e\n\u003cli\u003eAnyone KFI's application chart sends to a leveling kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV push tube leveling kit\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eOffset: +6 inch\u003c\/li\u003e\n\u003cli\u003eKFI machine height range: 17 to 18 inches\u003c\/li\u003e\n\u003cli\u003eIncluded: two 6-inch gusset plates, two spacers, two 6-inch level ears, a level kit rod and hardware kit HK-446\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106326\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI Pro 2.0 UTV push tube 106300 (square tube)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the discontinued round 105635 tube, KFI sells 105700 (2-inch) and 105705 (4-inch) instead. KFI's full range: -1 inch 106320, 1-2 inch 106322, 4 inch 106324, 6 inch 106326. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich leveling kit do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure your machine at the mount and use KFI's chart: about 8.5-9.5 inches for -1 (106320), 12-14 for 1-2 inch (106322), 15-16 for 4 inch (106324), 17-18 for 6 inch (106326).\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the old round push tube?\u003c\/h3\u003e\n\u003cp\u003eNo. It is for the square Pro 2.0 106300 tube. Round 105635 tubes use 105700 or 105705.\u003c\/p\u003e\n\u003ch3\u003eWhy does the blade need to be level?\u003c\/h3\u003e\n\u003cp\u003eA level push tube keeps the cutting edge flat, so it scrapes evenly instead of digging in or riding up.\u003c\/p\u003e\n\u003ch3\u003eIs hardware included?\u003c\/h3\u003e\n\u003cp\u003eYes: two 6-inch gusset plates, two spacers, two 6-inch level ears, a level kit rod and hardware kit HK-446. Reuse the ear hardware from the 106300 kit, or add hardware kit HK-398.\u003c\/p\u003e\n\u003ch3\u003eMy application chart says J. Is this the kit?\u003c\/h3\u003e\n\u003cp\u003eA J note on a KFI chart calls for the 2-inch kit: 106322 on Pro 2.0 tubes or 105700 on round tubes.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLevel Your KFI Pro 2.0 Plow\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI 6-inch leveling kit after you measure your machine against KFI's chart. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Which leveling kit do I need?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Measure your machine at the mount and use KFI's chart: about 8.5-9.5 inches for -1 (106320), 12-14 for 1-2 inch (106322), 15-16 for 4 inch (106324), 17-18 for 6 inch (106326).\"}}, {\"@type\": \"Question\", \"name\": \"Does it fit the old round push tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It is for the square Pro 2.0 106300 tube. Round 105635 tubes use 105700 or 105705.\"}}, {\"@type\": \"Question\", \"name\": \"Why does the blade need to be level?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A level push tube keeps the cutting edge flat, so it scrapes evenly instead of digging in or riding up.\"}}, {\"@type\": \"Question\", \"name\": \"Is hardware included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes: two 6-inch gusset plates, two spacers, two 6-inch level ears, a level kit rod and hardware kit HK-446. Reuse the ear hardware from the 106300 kit, or add hardware kit HK-398.\"}}, {\"@type\": \"Question\", \"name\": \"My application chart says J. Is this the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A J note on a KFI chart calls for the 2-inch kit: 106322 on Pro 2.0 tubes or 105700 on round tubes.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734527774756,"sku":"106326","price":104.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/7bf6bb24046dc7255d89150f844a7834.png?v=1765174266"},{"product_id":"kfi-pro-2-0-utv-push-tube-4-inch-leveling-kit","title":"KFI Pro 2.0 UTV Push Tube 4-Inch Leveling Kit","description":"\u003cp\u003e\u003cstrong\u003eThe KFI 4-inch leveling kit raises the push tube attachment point 4 inches for lifted machines, so your Pro 2.0 push tube runs level and the blade cuts flat.\u003c\/strong\u003e KFI lists it for machines that measure about 15 to 16 inches at the mount (the install sheet chart shows 14 to 16 inches), on the square Pro 2.0 106300 push tube.\u003c\/p\u003e\n\u003cp\u003eA push tube that runs uphill or downhill tips the blade, wears the cutting edge unevenly and makes the plow dig or ride up. Measure your machine first, then pick the kit that matches.\u003c\/p\u003e\n\u003cp\u003eThis UTV plow lift kit (or UTV snow plow lift, depending on what you searched) goes between the KFI push tube and the mount. It fits the square UTV plow push tube only. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e+4-inch change at the push tube attachment point\u003c\/li\u003e\n\u003cli\u003eMade for the KFI Pro 2.0 106300 square push tube\u003c\/li\u003e\n\u003cli\u003eIncluded: two 4-inch gusset plates, two spacers, two 4-inch level ears, a level kit rod and hardware kit HK-446\u003c\/li\u003e\n\u003cli\u003eReuse the ear hardware from the 106300 kit, or add hardware kit HK-398.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: A Plow Blade That Will Not Sit Level\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePush tube angled because the machine is lifted, lowered or on bigger tires\u003c\/li\u003e\n\u003cli\u003eBlade digging in at the front or riding on its top edge\u003c\/li\u003e\n\u003cli\u003eUneven cutting edge and wear bar wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Pro 2.0 Push Tube Owners on Modified or Unusual-Height UTVs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners with lift kits, oversize tires, tracks or High Lifter editions\u003c\/li\u003e\n\u003cli\u003eOwners whose machine sits low at the mount\u003c\/li\u003e\n\u003cli\u003eAnyone KFI's application chart sends to a leveling kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV push tube leveling kit\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eOffset: +4 inch\u003c\/li\u003e\n\u003cli\u003eKFI machine height range: 15 to 16 inches\u003c\/li\u003e\n\u003cli\u003eIncluded: two 4-inch gusset plates, two spacers, two 4-inch level ears, a level kit rod and hardware kit HK-446\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106324\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI Pro 2.0 UTV push tube 106300 (square tube)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the discontinued round 105635 tube, KFI sells 105700 (2-inch) and 105705 (4-inch) instead. KFI's full range: -1 inch 106320, 1-2 inch 106322, 4 inch 106324, 6 inch 106326. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich leveling kit do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure your machine at the mount and use KFI's chart: about 8.5-9.5 inches for -1 (106320), 12-14 for 1-2 inch (106322), 15-16 for 4 inch (106324), 17-18 for 6 inch (106326).\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the old round push tube?\u003c\/h3\u003e\n\u003cp\u003eNo. It is for the square Pro 2.0 106300 tube. Round 105635 tubes use 105700 or 105705.\u003c\/p\u003e\n\u003ch3\u003eWhy does the blade need to be level?\u003c\/h3\u003e\n\u003cp\u003eA level push tube keeps the cutting edge flat, so it scrapes evenly instead of digging in or riding up.\u003c\/p\u003e\n\u003ch3\u003eIs hardware included?\u003c\/h3\u003e\n\u003cp\u003eYes: two 4-inch gusset plates, two spacers, two 4-inch level ears, a level kit rod and hardware kit HK-446. Reuse the ear hardware from the 106300 kit, or add hardware kit HK-398.\u003c\/p\u003e\n\u003ch3\u003eMy application chart says J. Is this the kit?\u003c\/h3\u003e\n\u003cp\u003eA J note on a KFI chart calls for the 2-inch kit: 106322 on Pro 2.0 tubes or 105700 on round tubes.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLevel Your KFI Pro 2.0 Plow\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI 4-inch leveling kit after you measure your machine against KFI's chart. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Which leveling kit do I need?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Measure your machine at the mount and use KFI's chart: about 8.5-9.5 inches for -1 (106320), 12-14 for 1-2 inch (106322), 15-16 for 4 inch (106324), 17-18 for 6 inch (106326).\"}}, {\"@type\": \"Question\", \"name\": \"Does it fit the old round push tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It is for the square Pro 2.0 106300 tube. Round 105635 tubes use 105700 or 105705.\"}}, {\"@type\": \"Question\", \"name\": \"Why does the blade need to be level?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A level push tube keeps the cutting edge flat, so it scrapes evenly instead of digging in or riding up.\"}}, {\"@type\": \"Question\", \"name\": \"Is hardware included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes: two 4-inch gusset plates, two spacers, two 4-inch level ears, a level kit rod and hardware kit HK-446. Reuse the ear hardware from the 106300 kit, or add hardware kit HK-398.\"}}, {\"@type\": \"Question\", \"name\": \"My application chart says J. Is this the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A J note on a KFI chart calls for the 2-inch kit: 106322 on Pro 2.0 tubes or 105700 on round tubes.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734527807524,"sku":"106324","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/106324.png?v=1765174204"},{"product_id":"kfi-pro-2-0-utv-push-tube-1-2-inch-leveling-kit","title":"KFI Pro 2.0 UTV Push Tube 1-2 Inch Leveling Kit","description":"\u003cp\u003e\u003cstrong\u003eThe KFI 1-2 inch leveling kit raises the push tube attachment point for machines with small lifts, oversize tires or High Lifter editions, so your Pro 2.0 push tube runs level and the blade cuts flat.\u003c\/strong\u003e KFI lists it for machines that measure about 12 to 14 inches at the mount (the install sheet chart shows 11.5 to 14 inches), on the square Pro 2.0 106300 push tube.\u003c\/p\u003e\n\u003cp\u003eA push tube that runs uphill or downhill tips the blade, wears the cutting edge unevenly and makes the plow dig or ride up. Measure your machine first, then pick the kit that matches.\u003c\/p\u003e\n\u003cp\u003eThis UTV plow lift kit (or UTV snow plow lift, depending on what you searched) goes between the KFI push tube and the mount. It fits the square UTV plow push tube only. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e+1 or +2-inch change at the push tube attachment point\u003c\/li\u003e\n\u003cli\u003eMade for the KFI Pro 2.0 106300 square push tube\u003c\/li\u003e\n\u003cli\u003eIncluded: two leveling tabs and hardware kit HK-398\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: A Plow Blade That Will Not Sit Level\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePush tube angled because the machine is lifted, lowered or on bigger tires\u003c\/li\u003e\n\u003cli\u003eBlade digging in at the front or riding on its top edge\u003c\/li\u003e\n\u003cli\u003eUneven cutting edge and wear bar wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Pro 2.0 Push Tube Owners on Modified or Unusual-Height UTVs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners with lift kits, oversize tires, tracks or High Lifter editions\u003c\/li\u003e\n\u003cli\u003eOwners whose machine sits low at the mount\u003c\/li\u003e\n\u003cli\u003eAnyone KFI's application chart sends to a leveling kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV push tube leveling kit\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eOffset: +1 or +2 inch\u003c\/li\u003e\n\u003cli\u003eKFI machine height range: 12 to 14 inches\u003c\/li\u003e\n\u003cli\u003eIncluded: two leveling tabs and hardware kit HK-398\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106322\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI Pro 2.0 UTV push tube 106300 (square tube)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the discontinued round 105635 tube, KFI sells 105700 (2-inch) and 105705 (4-inch) instead. KFI's full range: -1 inch 106320, 1-2 inch 106322, 4 inch 106324, 6 inch 106326. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich leveling kit do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure your machine at the mount and use KFI's chart: about 8.5-9.5 inches for -1 (106320), 12-14 for 1-2 inch (106322), 15-16 for 4 inch (106324), 17-18 for 6 inch (106326).\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the old round push tube?\u003c\/h3\u003e\n\u003cp\u003eNo. It is for the square Pro 2.0 106300 tube. Round 105635 tubes use 105700 or 105705.\u003c\/p\u003e\n\u003ch3\u003eWhy does the blade need to be level?\u003c\/h3\u003e\n\u003cp\u003eA level push tube keeps the cutting edge flat, so it scrapes evenly instead of digging in or riding up.\u003c\/p\u003e\n\u003ch3\u003eIs hardware included?\u003c\/h3\u003e\n\u003cp\u003eYes: two leveling tabs and hardware kit HK-398.\u003c\/p\u003e\n\u003ch3\u003eMy application chart says J. Is this the kit?\u003c\/h3\u003e\n\u003cp\u003eA J note on a KFI chart calls for the 2-inch kit: 106322 on Pro 2.0 tubes or 105700 on round tubes.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLevel Your KFI Pro 2.0 Plow\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI 1-2 inch leveling kit after you measure your machine against KFI's chart. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Which leveling kit do I need?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Measure your machine at the mount and use KFI's chart: about 8.5-9.5 inches for -1 (106320), 12-14 for 1-2 inch (106322), 15-16 for 4 inch (106324), 17-18 for 6 inch (106326).\"}}, {\"@type\": \"Question\", \"name\": \"Does it fit the old round push tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It is for the square Pro 2.0 106300 tube. Round 105635 tubes use 105700 or 105705.\"}}, {\"@type\": \"Question\", \"name\": \"Why does the blade need to be level?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A level push tube keeps the cutting edge flat, so it scrapes evenly instead of digging in or riding up.\"}}, {\"@type\": \"Question\", \"name\": \"Is hardware included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes: two leveling tabs and hardware kit HK-398.\"}}, {\"@type\": \"Question\", \"name\": \"My application chart says J. Is this the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A J note on a KFI chart calls for the 2-inch kit: 106322 on Pro 2.0 tubes or 105700 on round tubes.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734527840292,"sku":"106322","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/6233-62d83ae0b8ed1.png?v=1760944934"},{"product_id":"kfi-pro-2-0-utv-push-tube-1-inch-negative-leveling-kit","title":"KFI Pro 2.0 UTV Push Tube 1-Inch Negative Leveling Kit","description":"\u003cp\u003e\u003cstrong\u003eThe KFI 1-inch negative leveling kit lowers the push tube attachment point by 1 inch for low machines, so your Pro 2.0 push tube runs level and the blade cuts flat.\u003c\/strong\u003e KFI lists it for machines that measure about 8.5 to 9.5 inches at the mount (the install sheet chart shows 8.5 to 9.5 inches), on the square Pro 2.0 106300 push tube.\u003c\/p\u003e\n\u003cp\u003eA push tube that runs uphill or downhill tips the blade, wears the cutting edge unevenly and makes the plow dig or ride up. Measure your machine first, then pick the kit that matches.\u003c\/p\u003e\n\u003cp\u003eThis UTV plow lift kit (or UTV snow plow lift, depending on what you searched) goes between the KFI push tube and the mount. It fits the square UTV plow push tube only. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e-1-inch change at the push tube attachment point\u003c\/li\u003e\n\u003cli\u003eMade for the KFI Pro 2.0 106300 square push tube\u003c\/li\u003e\n\u003cli\u003eIncluded: two -1-inch pin attachment brackets and hardware kit HK-398\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: A Plow Blade That Will Not Sit Level\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePush tube angled because the machine is lifted, lowered or on bigger tires\u003c\/li\u003e\n\u003cli\u003eBlade digging in at the front or riding on its top edge\u003c\/li\u003e\n\u003cli\u003eUneven cutting edge and wear bar wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Pro 2.0 Push Tube Owners on Modified or Unusual-Height UTVs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners with lift kits, oversize tires, tracks or High Lifter editions\u003c\/li\u003e\n\u003cli\u003eOwners whose machine sits low at the mount\u003c\/li\u003e\n\u003cli\u003eAnyone KFI's application chart sends to a leveling kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV push tube leveling kit\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eOffset: -1 inch\u003c\/li\u003e\n\u003cli\u003eKFI machine height range: 8.5 to 9.5 inches\u003c\/li\u003e\n\u003cli\u003eIncluded: two -1-inch pin attachment brackets and hardware kit HK-398\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106320\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI Pro 2.0 UTV push tube 106300 (square tube)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor the discontinued round 105635 tube, KFI sells 105700 (2-inch) and 105705 (4-inch) instead. KFI's full range: -1 inch 106320, 1-2 inch 106322, 4 inch 106324, 6 inch 106326. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhich leveling kit do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure your machine at the mount and use KFI's chart: about 8.5-9.5 inches for -1 (106320), 12-14 for 1-2 inch (106322), 15-16 for 4 inch (106324), 17-18 for 6 inch (106326).\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the old round push tube?\u003c\/h3\u003e\n\u003cp\u003eNo. It is for the square Pro 2.0 106300 tube. Round 105635 tubes use 105700 or 105705.\u003c\/p\u003e\n\u003ch3\u003eWhy does the blade need to be level?\u003c\/h3\u003e\n\u003cp\u003eA level push tube keeps the cutting edge flat, so it scrapes evenly instead of digging in or riding up.\u003c\/p\u003e\n\u003ch3\u003eIs hardware included?\u003c\/h3\u003e\n\u003cp\u003eYes: two -1-inch pin attachment brackets and hardware kit HK-398.\u003c\/p\u003e\n\u003ch3\u003eMy application chart says J. Is this the kit?\u003c\/h3\u003e\n\u003cp\u003eA J note on a KFI chart calls for the 2-inch kit: 106322 on Pro 2.0 tubes or 105700 on round tubes.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eLevel Your KFI Pro 2.0 Plow\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI 1-inch negative leveling kit after you measure your machine against KFI's chart. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Which leveling kit do I need?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Measure your machine at the mount and use KFI's chart: about 8.5-9.5 inches for -1 (106320), 12-14 for 1-2 inch (106322), 15-16 for 4 inch (106324), 17-18 for 6 inch (106326).\"}}, {\"@type\": \"Question\", \"name\": \"Does it fit the old round push tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It is for the square Pro 2.0 106300 tube. Round 105635 tubes use 105700 or 105705.\"}}, {\"@type\": \"Question\", \"name\": \"Why does the blade need to be level?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A level push tube keeps the cutting edge flat, so it scrapes evenly instead of digging in or riding up.\"}}, {\"@type\": \"Question\", \"name\": \"Is hardware included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes: two -1-inch pin attachment brackets and hardware kit HK-398.\"}}, {\"@type\": \"Question\", \"name\": \"My application chart says J. Is this the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A J note on a KFI chart calls for the 2-inch kit: 106322 on Pro 2.0 tubes or 105700 on round tubes.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734527873060,"sku":"106320","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/e7d0-62d83aaa2c3d9.png?v=1760944938"},{"product_id":"kfi-atv-utv-plow-push-tube-mid-extension","title":"KFI ATV\/UTV Plow Push Tube Mid Extension (5.32\")","description":"\u003cp\u003e\u003cstrong\u003eThe KFI plow mid extension moves your blade 5.32 inches forward for extra clearance in front of the tires.\u003c\/strong\u003e It is 1\/4-inch grade 50 steel with hardware and fits most KFI push tubes, both ATV and UTV.\u003c\/p\u003e\n\u003cp\u003eUse it when a bigger tire or bumper crowds the plow but you do not need the full 10-inch track extension. KFI says it will not work with the actuator kit.\u003c\/p\u003e\n\u003cp\u003eIt is one of the shorter UTV plow extensions and UTV snow plow extensions for the KFI push tube line, fitting the UTV plow push tube options listed. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExtends the blade 5.32 inches forward\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eAll hardware included\u003c\/li\u003e\n\u003cli\u003eNot compatible with the actuator kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: More Room Between the Plow and the Tires\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBlade crowding larger tires\u003c\/li\u003e\n\u003cli\u003eNeed for a little more reach without a track extension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: KFI Plow Owners Needing More Reach\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners with larger tires\u003c\/li\u003e\n\u003cli\u003eManual-angle KFI plow owners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: push tube mid extension\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eExtension: 5.32 inches\u003c\/li\u003e\n\u003cli\u003eMaterial: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eIncluded: mid extension and hardware kit HK-393\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106215\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI push tubes 106300, 105635, 105000, 105905, 105760 and 105590\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKFI states it will NOT work with the actuator kit. For tracks, use the 10.33-inch 106330 track extension. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow far does it move the blade?\u003c\/h3\u003e\n\u003cp\u003e5.32 inches forward.\u003c\/p\u003e\n\u003ch3\u003eDoes it work with a hydraulic actuator?\u003c\/h3\u003e\n\u003cp\u003eNo. KFI says it will not work with the actuator kit.\u003c\/p\u003e\n\u003ch3\u003eWhich tubes does it fit?\u003c\/h3\u003e\n\u003cp\u003eKFI 106300, 105635, 105000, 105905, 105760 and 105590.\u003c\/p\u003e\n\u003ch3\u003eShould I get this or the track extension?\u003c\/h3\u003e\n\u003cp\u003eThis is the short extension. Tracks need the 10.33-inch 106330 track extension.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 106215, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eGive Your KFI Plow More Reach\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI mid extension for a manual-angle KFI plow that needs a few more inches of clearance. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How far does it move the blade?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"5.32 inches forward.\"}}, {\"@type\": \"Question\", \"name\": \"Does it work with a hydraulic actuator?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. KFI says it will not work with the actuator kit.\"}}, {\"@type\": \"Question\", \"name\": \"Which tubes does it fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI 106300, 105635, 105000, 105905, 105760 and 105590.\"}}, {\"@type\": \"Question\", \"name\": \"Should I get this or the track extension?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the short extension. Tracks need the 10.33-inch 106330 track extension.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 106215, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734527938596,"sku":"106215","price":81.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/7526-62d8354d6a175.png?v=1760944941"},{"product_id":"kfi-utv-plow-hydraulic-actuator-12v","title":"KFI UTV Plow Hydraulic Actuator, 12V (Replacement)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI ACT203 is a 12-volt electric-over-hydraulic cylinder that angles your KFI UTV plow blade left and right from the seat.\u003c\/strong\u003e It plugs in with a Metri-Pack 280 2-pin male end and carries a 1-year KFI limited warranty.\u003c\/p\u003e\n\u003cp\u003eUse it to add power angle to a KFI push tube, or to replace a worn actuator. KFI also sells service parts so an ACT203 can be rebuilt.\u003c\/p\u003e\n\u003cp\u003eThe ACT203 is the KFI plow actuator (KFI actuator) behind UTV plow power angle, a snow plow actuator that buyers also search as a UTV plow actuator, UTV plow angle actuator or plow angle actuator. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12-volt electric-over-hydraulic cylinder\u003c\/li\u003e\n\u003cli\u003eMetri-Pack 280 2-pin male connector\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for KFI UTV push tubes\u003c\/li\u003e\n\u003cli\u003e1-year KFI limited warranty\u003c\/li\u003e\n\u003cli\u003eServiceable: rod end, motor and plug sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Angling a UTV Plow From the Seat\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGetting out to pull the angle pin on every pass\u003c\/li\u003e\n\u003cli\u003eA worn or leaking plow actuator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: KFI Plow Owners Adding or Replacing Power Angle\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners converting to power angle\u003c\/li\u003e\n\u003cli\u003eOwners replacing a worn ACT203\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: hydraulic plow actuator\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eType: 12V electric over hydraulic\u003c\/li\u003e\n\u003cli\u003eConnector: Metri-Pack 280 2-pin male\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year (KFI limited)\u003c\/li\u003e\n\u003cli\u003eNot included: push tube, bracket kit, wire harness\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: ACT203\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI UTV push tubes with the KFI actuator bracket kit (106305 for the Pro 2.0 106300 tube)\u003c\/li\u003e\n\u003cli\u003eKFI wire harness 106940 or hand remote kit 106950\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe tube, bracket kit and wire harness are sold separately. The KFI Pro-V Box 4 actuator kits use two ACT203 actuators. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat do I need to run the actuator?\u003c\/h3\u003e\n\u003cp\u003eA bracket kit for your push tube (106305 on a 106300 tube) and a control: the 106940 dash switch harness or the 106950 hand remote kit.\u003c\/p\u003e\n\u003ch3\u003eIs it 12-volt?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a 12V electric-over-hydraulic cylinder.\u003c\/p\u003e\n\u003ch3\u003eCan it be repaired?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI lists a replacement rod end, motor and Metri-Pack 280 plug for the ACT203.\u003c\/p\u003e\n\u003ch3\u003eWhat is the warranty?\u003c\/h3\u003e\n\u003cp\u003e1 year KFI limited warranty.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit the Pro-V plow?\u003c\/h3\u003e\n\u003cp\u003eThe Pro-V Box 4 actuator kits use two ACT203 actuators, one per wing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAdd Power Angle to Your KFI Plow\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI ACT203 actuator with the bracket kit and control for your setup. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What do I need to run the actuator?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A bracket kit for your push tube (106305 on a 106300 tube) and a control: the 106940 dash switch harness or the 106950 hand remote kit.\"}}, {\"@type\": \"Question\", \"name\": \"Is it 12-volt?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is a 12V electric-over-hydraulic cylinder.\"}}, {\"@type\": \"Question\", \"name\": \"Can it be repaired?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI lists a replacement rod end, motor and Metri-Pack 280 plug for the ACT203.\"}}, {\"@type\": \"Question\", \"name\": \"What is the warranty?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"1 year KFI limited warranty.\"}}, {\"@type\": \"Question\", \"name\": \"Does it fit the Pro-V plow?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The Pro-V Box 4 actuator kits use two ACT203 actuators, one per wing.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528004132,"sku":"ACT203","price":734.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/ce03-61536ebf347bb.jpg?v=1760944951"},{"product_id":"kfi-utv-push-tube-track-extension-for-tracked-machines","title":"KFI UTV Push Tube Track Extension for Tracked Machines","description":"\u003cp\u003e\u003cstrong\u003eThe KFI UTV track extension moves your plow blade 10.33 inches forward so it clears the tracks on a tracked UTV.\u003c\/strong\u003e It is 1\/4-inch grade 50 steel, fits the KFI 106300 and 105635 push tubes and the 106310 \/ 105905 Cycle Country conversion tubes, and comes with hardware.\u003c\/p\u003e\n\u003cp\u003eTracks stick out much further than tires, so a standard push tube puts the blade into the tracks when it angles. The extension pushes the blade out to clear them.\u003c\/p\u003e\n\u003cp\u003eThis is the longest of the UTV plow extensions and UTV snow plow extensions KFI makes for the KFI push tube, sold as a plow track extension; it bolts to any of the UTV plow push tube options listed. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExtends the UTV blade 10.33 inches forward\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eAll hardware included\u003c\/li\u003e\n\u003cli\u003eReplaces older extension 105565, which does not fit the Pro 2.0 106300 tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Plowing on a UTV With Tracks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBlade hitting the tracks when angled\u003c\/li\u003e\n\u003cli\u003eNo room for the plow in front of a track kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Tracked UTV Owners With a KFI Plow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners who run tracks in winter\u003c\/li\u003e\n\u003cli\u003eOwners who need the blade further forward\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV push tube track extension\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eExtension: 10.33 inches\u003c\/li\u003e\n\u003cli\u003eMaterial: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eIncluded: track extension and hardware kit HK-393\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106330\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI Pro 2.0 push tube 106300\u003c\/li\u003e\n\u003cli\u003eKFI round push tube 105635\u003c\/li\u003e\n\u003cli\u003eKFI Cycle Country conversion push tubes 106310 and 105905\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDrilling: if your push tube does not already have the rear holes, KFI's instructions drill 2 holes through the push tube with a 13\/32-inch bit. For a hydraulic actuator on a 106300 tube with this extension, add actuator bracket kit 106335. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHow far forward does it move the blade?\u003c\/h3\u003e\n\u003cp\u003e10.33 inches.\u003c\/p\u003e\n\u003ch3\u003eDoes it require drilling?\u003c\/h3\u003e\n\u003cp\u003eOnly if your push tube lacks the rear holes. Then KFI's instructions drill 2 holes with a 13\/32-inch bit.\u003c\/p\u003e\n\u003ch3\u003eCan I still use a hydraulic actuator?\u003c\/h3\u003e\n\u003cp\u003eYes, with KFI 106335 track extension actuator brackets on a 106300 tube.\u003c\/p\u003e\n\u003ch3\u003eDoes the old 105565 extension fit a 106300 tube?\u003c\/h3\u003e\n\u003cp\u003eNo. KFI says the older 105565 will not work with the Pro 2.0 tube; this part replaces it.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 106330, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eClear Your Tracks With the KFI Track Extension\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI UTV track extension and add the 106335 actuator brackets if you run a power-angle plow. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How far forward does it move the blade?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"10.33 inches.\"}}, {\"@type\": \"Question\", \"name\": \"Does it require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Only if your push tube lacks the rear holes. Then KFI's instructions drill 2 holes with a 13\/32-inch bit.\"}}, {\"@type\": \"Question\", \"name\": \"Can I still use a hydraulic actuator?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, with KFI 106335 track extension actuator brackets on a 106300 tube.\"}}, {\"@type\": \"Question\", \"name\": \"Does the old 105565 extension fit a 106300 tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. KFI says the older 105565 will not work with the Pro 2.0 tube; this part replaces it.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 106330, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528036900,"sku":"106330","price":105.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/f0a0-611d5162db759.png?v=1760944956"},{"product_id":"kfi-polaris-ranger-xp-high-lifter-plow-mount-receiver","title":"KFI Polaris Ranger XP High Lifter Plow Mount \u0026 Receiver (2016-2025)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Polaris Ranger High Lifter plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Polaris Ranger High Lifter can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Polaris Ranger XP 900 and XP 1000 High Lifter, Big Game and Waterfowl editions, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a Polaris Ranger XP 1000 snow plow on High Lifter and Big Game editions, so polaris ranger highlifter plow and snow plow for polaris ranger xp 1000 shoppers start here. It works as a utv snow plow 2 inch receiver and as the base for a polaris ranger snow plow on these models.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Polaris Ranger XP 900 and XP 1000 High Lifter, Big Game and Waterfowl editions\u003c\/li\u003e\n\u003cli\u003eIntegrated 2-inch lower receiver, so the mount also works as a front receiver hitch when the plow is off\u003c\/li\u003e\n\u003cli\u003ePlate made from 3\/16-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Polaris Ranger High Lifter\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Polaris Ranger High Lifter\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Polaris Ranger High Lifter Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris Ranger High Lifter owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount with integrated 2-inch lower receiver\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 3\/16-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: plow mount and hardware kit HK-341 (three 3\/8-inch bolts and nuts)\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106485\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRanger XP 900 High Lifter (2016)\u003c\/li\u003e\n\u003cli\u003eRanger XP 1000 High Lifter (2017-2022)\u003c\/li\u003e\n\u003cli\u003eRanger XP 1000 Big Game and Waterfowl (2021-2022)\u003c\/li\u003e\n\u003cli\u003eRanger Crew XP 1000 High Lifter (2017-2022)\u003c\/li\u003e\n\u003cli\u003eRanger Crew XP 1000 Big Game (2021-2022)\u003c\/li\u003e\n\u003cli\u003eRanger Crew XP 1000 Waterfowl (2021-2022 and 2025)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRequires a KFI 2-inch leveling kit: 106322 for the Pro 2.0 106300 tubes, or 105700 for the older round 105635 tubes. 2016-2020 High Lifter models: may require drilling. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Polaris Ranger High Lifter?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: Ranger XP 900 High Lifter (2016); Ranger XP 1000 High Lifter (2017-2022); Ranger XP 1000 Big Game and Waterfowl (2021-2022); Ranger Crew XP 1000 High Lifter (2017-2022); Ranger Crew XP 1000 Big Game (2021-2022); Ranger Crew XP 1000 Waterfowl (2021-2022 and 2025). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Polaris Ranger High Lifter?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eKFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\u003c\/p\u003e\n\u003ch3\u003eCan I use the receiver without the plow?\u003c\/h3\u003e\n\u003cp\u003eYes. The mount has an integrated 2-inch lower receiver, so it works as a front receiver hitch when the push tube is off.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Polaris Ranger High Lifter?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Polaris Ranger High Lifter Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Polaris Ranger High Lifter plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Polaris Ranger High Lifter?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: Ranger XP 900 High Lifter (2016); Ranger XP 1000 High Lifter (2017-2022); Ranger XP 1000 Big Game and Waterfowl (2021-2022); Ranger Crew XP 1000 High Lifter (2017-2022); Ranger Crew XP 1000 Big Game (2021-2022); Ranger Crew XP 1000 Waterfowl (2021-2022 and 2025). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Polaris Ranger High Lifter?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\"}}, {\"@type\": \"Question\", \"name\": \"Can I use the receiver without the plow?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The mount has an integrated 2-inch lower receiver, so it works as a front receiver hitch when the push tube is off.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Polaris Ranger High Lifter?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528135204,"sku":"106485","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/d6e5-6393b61e009c5.jpg?v=1760944970"},{"product_id":"kfi-utv-plow-lever-lift-to-reduce-winch-strain","title":"KFI UTV Plow Lever Lift to Reduce Winch Strain","description":"\u003cp\u003e\u003cstrong\u003eThe KFI UTV plow lever lift moves the lift attach point on your push tube to reduce winch and cable strain from low-mounted winches and bad cable angles.\u003c\/strong\u003e It is fully adjustable, built from 3\/16-inch grade 50 steel and comes with hardware.\u003c\/p\u003e\n\u003cp\u003eWhen the winch sits low, it pulls the plow back more than it lifts it up. The lever lift changes the geometry so more of the pull lifts the blade.\u003c\/p\u003e\n\u003cp\u003eIt bolts to the KFI push tube (either UTV plow push tube listed below) and works with a winch line or a UTV plow strap to give a better UTV snow plow lift. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRepositions the lift attach point to reduce winch and cable strain\u003c\/li\u003e\n\u003cli\u003eFully adjustable for multiple angles and attach points\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 3\/16-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eIncludes bracket, channel, 5\/8-inch hitch pin with clip and hardware kit HK-155\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: A Winch That Struggles to Lift the Plow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLow-mounted winch pulling at a poor angle\u003c\/li\u003e\n\u003cli\u003eCable wear and winch strain on every lift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: KFI Push Tube Owners With Low Winches\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners whose winch sits low on the machine\u003c\/li\u003e\n\u003cli\u003eOwners fighting bad cable angles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: plow lever lift\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eMaterial: 3\/16-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eIncluded: lever lift bracket, channel, 5\/8-inch hitch pin with clip, hardware kit HK-155\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106045\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI UTV push tube 106300\u003c\/li\u003e\n\u003cli\u003eKFI UTV push tube 105635\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKFI states it does not work with plow actuator 105935. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat does the lever lift do?\u003c\/h3\u003e\n\u003cp\u003eIt moves the lift point on the push tube so the winch lifts more and pulls back less.\u003c\/p\u003e\n\u003ch3\u003eWhich tubes does it fit?\u003c\/h3\u003e\n\u003cp\u003eKFI UTV push tubes 106300 and 105635.\u003c\/p\u003e\n\u003ch3\u003eDoes it work with an actuator?\u003c\/h3\u003e\n\u003cp\u003eKFI says it does not work with actuator 105935.\u003c\/p\u003e\n\u003ch3\u003eIs hardware included?\u003c\/h3\u003e\n\u003cp\u003eYes: the bracket, channel, a 5\/8-inch hitch pin with clip and hardware kit HK-155.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 106045, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTake the Strain Off Your Winch\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI UTV plow lever lift if your winch fights a poor lift angle. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the lever lift do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It moves the lift point on the push tube so the winch lifts more and pulls back less.\"}}, {\"@type\": \"Question\", \"name\": \"Which tubes does it fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI UTV push tubes 106300 and 105635.\"}}, {\"@type\": \"Question\", \"name\": \"Does it work with an actuator?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI says it does not work with actuator 105935.\"}}, {\"@type\": \"Question\", \"name\": \"Is hardware included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes: the bracket, channel, a 5\/8-inch hitch pin with clip and hardware kit HK-155.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 106045, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528233508,"sku":"106045","price":65.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/a8fd8193a6c30a90315d9ba3974ba3e1.png?v=1765155775"},{"product_id":"kfi-utv-plow-push-tube-cradle","title":"KFI UTV Plow Push Tube Cradle","description":"\u003cp\u003e\u003cstrong\u003eThe KFI UTV plow cradle is the replacement cradle for KFI's round and Pro 2.0 UTV push tubes,\u003c\/strong\u003e so you can repair a worn or damaged push tube instead of replacing the whole plow system. KFI has since released a direct replacement; this listing sells the remaining stock of this version.\u003c\/p\u003e\u003cp\u003eIf you are shopping for UTV snow plow accessories or KFI plow replacement parts, this cradle keeps an existing KFI push tube in service for another winter.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacement cradle for KFI UTV push tubes 105635 and 106300, per KFI\u003c\/li\u003e\n\u003cli\u003ePredecessor of KFI 106561-R, which KFI calls a direct replacement\u003c\/li\u003e\n\u003cli\u003eSold as the cradle only\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eBuilt To Solve: Worn or Damaged KFI Push Tube Cradle\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eA bent or cracked cradle after a season of plowing\u003c\/li\u003e\n\u003cli\u003eReplacing a whole push tube when only the cradle is damaged\u003c\/li\u003e\n\u003cli\u003eKeeping an older KFI round push tube working\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eBest For: KFI UTV Plow Owners Repairing Their Push Tube\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOwners of a KFI 105635 or Pro 2.0 106300 UTV push tube\u003c\/li\u003e\n\u003cli\u003eShops servicing KFI UTV plow systems before winter\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eProduct type: UTV plow push tube cradle\u003c\/li\u003e\n\u003cli\u003eFits: KFI UTV push tubes 105635 and 106300\u003c\/li\u003e\n\u003cli\u003eMounting hardware: not included\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105639-R\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eKFI UTV push tube 105635\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eKFI Pro 2.0 UTV push tube 106300\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment is taken from KFI data for this part. Not guaranteed on non-KFI push tubes.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhat does the KFI UTV plow cradle fit?\u003c\/h3\u003e\u003cp\u003eKFI lists it for its UTV push tubes 105635 and 106300 (the Pro 2.0 push tube).\u003c\/p\u003e\u003ch3\u003eIs mounting hardware included?\u003c\/h3\u003e\u003cp\u003eNo. KFI states that mounting hardware is not included, so reuse your existing hardware or source it separately.\u003c\/p\u003e\u003ch3\u003eIs this part still made?\u003c\/h3\u003e\u003cp\u003eKFI has discontinued this cradle and lists 106561-R as its direct replacement. This listing sells the remaining distributor stock.\u003c\/p\u003e\u003ch3\u003eWill this fix a damaged cradle on my push tube?\u003c\/h3\u003e\u003cp\u003eIf the cradle on a KFI 105635 or 106300 push tube is bent, cracked or worn, this is the KFI replacement cradle for those tubes.\u003c\/p\u003e\u003ch3\u003eDo I need anything else to plow?\u003c\/h3\u003e\u003cp\u003eThe cradle is a replacement part only. A complete setup still needs a vehicle-specific KFI plow mount, a push tube, a blade and a winch or actuator to lift it.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eWhy KFI\u003c\/h2\u003e\u003cp\u003eKFI designs and builds UTV plow systems, push tubes, plow mounts and winch mounts, and publishes replacement parts so a plow can be kept in service instead of replaced.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKeep Your KFI UTV Plow Push Tube in Service\u003c\/h2\u003e\u003cp\u003eConfirm your push tube is KFI 105635 or 106300 before ordering this cradle, and plan mounting hardware since it is not included. Browse the rest of the KFI push tube parts and leveling kits to finish a pre-season plow service. Order from Dunes 2 Dezert SXS and we will ship it to you.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the KFI UTV plow cradle fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for its UTV push tubes 105635 and 106300 (the Pro 2.0 push tube).\"}}, {\"@type\": \"Question\", \"name\": \"Is mounting hardware included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. KFI states that mounting hardware is not included, so reuse your existing hardware or source it separately.\"}}, {\"@type\": \"Question\", \"name\": \"Is this part still made?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI has discontinued this cradle and lists 106561-R as its direct replacement. This listing sells the remaining distributor stock.\"}}, {\"@type\": \"Question\", \"name\": \"Will this fix a damaged cradle on my push tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"If the cradle on a KFI 105635 or 106300 push tube is bent, cracked or worn, this is the KFI replacement cradle for those tubes.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need anything else to plow?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The cradle is a replacement part only. A complete setup still needs a vehicle-specific KFI plow mount, a push tube, a blade and a winch or actuator to lift it.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528299044,"sku":"105639-R","price":55.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/105639-R-RevG-01.jpg?v=1791515919"},{"product_id":"kfi-winch-plow-roller-for-steel-cable-standard-winch","title":"KFI Winch Plow Roller for Steel Cable, Standard Winch","description":"\u003cp\u003e\u003cstrong\u003eThe KFI winch plow roller replaces the fairlead on a standard winch during plow season, so a steel cable runs over a large roller instead of the stock fairlead.\u003c\/strong\u003e It fits winches with a 4.875-inch fairlead bolt pattern and is for steel cable only.\u003c\/p\u003e\n\u003cp\u003ePlowing cycles the winch hundreds of times a season at bad angles. A big curved roller reduces flattening and kinking, the usual reasons steel plow cables snap.\u003c\/p\u003e\n\u003cp\u003eThis winch plow roller is a plow fairlead for steel cable. It mounts at the winch, not the push tube; for a push-tube UTV plow pulley or plow pulley, KFI now uses the 106680 Quick Pulley. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge 2-1\/8-inch diameter roller vs. standard 7\/8-inch rollers\u003c\/li\u003e\n\u003cli\u003eCurved roller groove reduces cable flattening\u003c\/li\u003e\n\u003cli\u003eHelps eliminate kinking from small rollers and sharp angle changes\u003c\/li\u003e\n\u003cli\u003eMultiple mounting positions for different winch heights and cable angles\u003c\/li\u003e\n\u003cli\u003eFits STANDARD winches with a 4.875-inch fairlead bolt pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Steel Winch Cable Wearing Out While Plowing\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFlattened or kinked steel cable\u003c\/li\u003e\n\u003cli\u003eCable snapping from repeated plow lifts\u003c\/li\u003e\n\u003cli\u003eWinch strain from poor cable angles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: UTV Owners Plowing With a Steel Cable Winch\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners plowing with steel cable\u003c\/li\u003e\n\u003cli\u003eOwners with 4.875-inch pattern winches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: winch plow roller (fairlead)\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eCable: steel only\u003c\/li\u003e\n\u003cli\u003eWinch pattern: 4.875-inch (standard)\u003c\/li\u003e\n\u003cli\u003eRoller: 2-1\/8-inch diameter\u003c\/li\u003e\n\u003cli\u003eIncluded: fairlead pulley bracket, steel plow roller, hardware kit HK-138\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105270\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard winches with a 4.875-inch fairlead bolt pattern, steel cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWinch-mounted use only; not for push-tube mounting. For wide 6.00-inch winches use KFI 105465. For synthetic rope, KFI recommends the SE-RF (standard) or SE-WRF (wide) roller fairlead. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this for steel or synthetic cable?\u003c\/h3\u003e\n\u003cp\u003eSteel cable only.\u003c\/p\u003e\n\u003ch3\u003eDoes it mount on the push tube?\u003c\/h3\u003e\n\u003cp\u003eNo. It replaces the fairlead at the winch. The push-tube steel-cable pulley is the KFI 106680 Quick Pulley.\u003c\/p\u003e\n\u003ch3\u003eWhich winches does it fit?\u003c\/h3\u003e\n\u003cp\u003eStandard winches with a 4.875-inch fairlead bolt pattern. The other size is KFI 105465.\u003c\/p\u003e\n\u003ch3\u003eWhy not just use the stock fairlead?\u003c\/h3\u003e\n\u003cp\u003eA 2-1\/8-inch curved roller is gentler on steel cable than a 7\/8-inch roller, reducing flattening and kinking.\u003c\/p\u003e\n\u003ch3\u003eWhat else helps?\u003c\/h3\u003e\n\u003cp\u003eKFI recommends a 12-inch soft strap (106470) to attach the winch hook back to the machine while plowing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProtect Your Steel Winch Cable This Plow Season\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI winch plow roller that matches your winch pattern. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is this for steel or synthetic cable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Steel cable only.\"}}, {\"@type\": \"Question\", \"name\": \"Does it mount on the push tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It replaces the fairlead at the winch. The push-tube steel-cable pulley is the KFI 106680 Quick Pulley.\"}}, {\"@type\": \"Question\", \"name\": \"Which winches does it fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Standard winches with a 4.875-inch fairlead bolt pattern. The other size is KFI 105465.\"}}, {\"@type\": \"Question\", \"name\": \"Why not just use the stock fairlead?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A 2-1\/8-inch curved roller is gentler on steel cable than a 7\/8-inch roller, reducing flattening and kinking.\"}}, {\"@type\": \"Question\", \"name\": \"What else helps?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI recommends a 12-inch soft strap (106470) to attach the winch hook back to the machine while plowing.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528462884,"sku":"105270","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/1210-5b69b6c75a137.jpg?v=1760944998"},{"product_id":"kfi-winch-plow-roller-for-steel-cable-wide-winch","title":"KFI Winch Plow Roller for Steel Cable, Wide Winch","description":"\u003cp\u003e\u003cstrong\u003eThe KFI winch plow roller replaces the fairlead on a wide winch during plow season, so a steel cable runs over a large roller instead of the stock fairlead.\u003c\/strong\u003e It fits winches with a 6.00-inch fairlead bolt pattern and is for steel cable only.\u003c\/p\u003e\n\u003cp\u003ePlowing cycles the winch hundreds of times a season at bad angles. A big curved roller reduces flattening and kinking, the usual reasons steel plow cables snap.\u003c\/p\u003e\n\u003cp\u003eThis winch plow roller is a plow fairlead for steel cable. It mounts at the winch, not the push tube; for a push-tube UTV plow pulley or plow pulley, KFI now uses the 106680 Quick Pulley. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLarge 2-1\/8-inch diameter roller vs. standard 7\/8-inch rollers\u003c\/li\u003e\n\u003cli\u003eCurved roller groove reduces cable flattening\u003c\/li\u003e\n\u003cli\u003eHelps eliminate kinking from small rollers and sharp angle changes\u003c\/li\u003e\n\u003cli\u003eMultiple mounting positions for different winch heights and cable angles\u003c\/li\u003e\n\u003cli\u003eFits WIDE winches with a 6.00-inch fairlead bolt pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Steel Winch Cable Wearing Out While Plowing\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFlattened or kinked steel cable\u003c\/li\u003e\n\u003cli\u003eCable snapping from repeated plow lifts\u003c\/li\u003e\n\u003cli\u003eWinch strain from poor cable angles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: UTV Owners Plowing With a Steel Cable Winch\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners plowing with steel cable\u003c\/li\u003e\n\u003cli\u003eOwners with 6.00-inch pattern winches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: winch plow roller (fairlead)\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eCable: steel only\u003c\/li\u003e\n\u003cli\u003eWinch pattern: 6.00-inch (wide)\u003c\/li\u003e\n\u003cli\u003eRoller: 2-1\/8-inch diameter\u003c\/li\u003e\n\u003cli\u003eIncluded: fairlead pulley bracket, steel plow roller, hardware kit HK-138\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105465\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWide winches with a 6.00-inch fairlead bolt pattern, steel cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWinch-mounted use only; not for push-tube mounting. For standard 4.875-inch winches use KFI 105270. For synthetic rope, KFI recommends the SE-RF (standard) or SE-WRF (wide) roller fairlead. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this for steel or synthetic cable?\u003c\/h3\u003e\n\u003cp\u003eSteel cable only.\u003c\/p\u003e\n\u003ch3\u003eDoes it mount on the push tube?\u003c\/h3\u003e\n\u003cp\u003eNo. It replaces the fairlead at the winch. The push-tube steel-cable pulley is the KFI 106680 Quick Pulley.\u003c\/p\u003e\n\u003ch3\u003eWhich winches does it fit?\u003c\/h3\u003e\n\u003cp\u003eWide winches with a 6.00-inch fairlead bolt pattern. The other size is KFI 105270.\u003c\/p\u003e\n\u003ch3\u003eWhy not just use the stock fairlead?\u003c\/h3\u003e\n\u003cp\u003eA 2-1\/8-inch curved roller is gentler on steel cable than a 7\/8-inch roller, reducing flattening and kinking.\u003c\/p\u003e\n\u003ch3\u003eWhat else helps?\u003c\/h3\u003e\n\u003cp\u003eKFI recommends a 12-inch soft strap (106470) to attach the winch hook back to the machine while plowing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eProtect Your Steel Winch Cable This Plow Season\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI winch plow roller that matches your winch pattern. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is this for steel or synthetic cable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Steel cable only.\"}}, {\"@type\": \"Question\", \"name\": \"Does it mount on the push tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It replaces the fairlead at the winch. The push-tube steel-cable pulley is the KFI 106680 Quick Pulley.\"}}, {\"@type\": \"Question\", \"name\": \"Which winches does it fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Wide winches with a 6.00-inch fairlead bolt pattern. The other size is KFI 105270.\"}}, {\"@type\": \"Question\", \"name\": \"Why not just use the stock fairlead?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A 2-1\/8-inch curved roller is gentler on steel cable than a 7\/8-inch roller, reducing flattening and kinking.\"}}, {\"@type\": \"Question\", \"name\": \"What else helps?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI recommends a 12-inch soft strap (106470) to attach the winch hook back to the machine while plowing.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528495652,"sku":"105465","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/519f-5951183f9f128.jpg?v=1760945002"},{"product_id":"kfi-60-inch-snow-plow-flap-kit","title":"KFI 60\" Snow Plow Flap Kit","description":"\u003cp\u003e\u003cstrong\u003eThe KFI 60-inch snow plow flap kit adds a 6.5-inch rubber flap to the top of a 60-inch KFI blade, so snow rolls forward instead of over the top.\u003c\/strong\u003e It includes an adjustable 11-gauge steel edge strip, a 2-3 ply rubber flap and hardware kit HK-102; KFI blades are pre-drilled for it.\u003c\/p\u003e\n\u003cp\u003eThe flap acts as a snow deflector and as an extension of the blade height.\u003c\/p\u003e\n\u003cp\u003eThis flap is a snow plow deflector for a 60-inch UTV plow blade or UTV snow plow blade. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e60-inch length\u003c\/li\u003e\n\u003cli\u003e6.5-inch 2-3 ply rubber flap\u003c\/li\u003e\n\u003cli\u003eAdjustable 11-gauge steel edge strip\u003c\/li\u003e\n\u003cli\u003eTwo-way adjustable\u003c\/li\u003e\n\u003cli\u003eHardware kit HK-102 included; KFI blades are pre-drilled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Snow Spilling Over the Blade\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSnow coming over the top of the blade toward the windshield\u003c\/li\u003e\n\u003cli\u003eLight snow blowing back over the plow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Owners of 60\" KFI Plow Blades\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners of 60-inch KFI blades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: snow plow flap kit\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eLength: 60 inches\u003c\/li\u003e\n\u003cli\u003eFlap: 6.5-inch, 2-3 ply rubber\u003c\/li\u003e\n\u003cli\u003eEdge strip: 11-gauge steel, adjustable\u003c\/li\u003e\n\u003cli\u003eIncluded: flap, edge strip, hardware kit HK-102\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105144\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e60-inch KFI plow blades (pre-drilled)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKFI sells flap kits in 48, 54, 60, 66 and 72 inches. Match the kit to your blade width. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat does a plow flap do?\u003c\/h3\u003e\n\u003cp\u003eIt stops snow from coming over the top of the blade and adds height to the blade.\u003c\/p\u003e\n\u003ch3\u003eDo I need to drill?\u003c\/h3\u003e\n\u003cp\u003eNo. KFI blades are pre-drilled, and hardware kit HK-102 is included.\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch your blade: this is the 60-inch kit.\u003c\/p\u003e\n\u003ch3\u003eIs it adjustable?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI lists it as two-way adjustable.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 105144, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAdd a Snow Deflector to Your 60\" KFI Blade\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI 60-inch flap kit for your blade. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does a plow flap do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It stops snow from coming over the top of the blade and adds height to the blade.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need to drill?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. KFI blades are pre-drilled, and hardware kit HK-102 is included.\"}}, {\"@type\": \"Question\", \"name\": \"Which size do I need?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Match your blade: this is the 60-inch kit.\"}}, {\"@type\": \"Question\", \"name\": \"Is it adjustable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI lists it as two-way adjustable.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 105144, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528528420,"sku":"105144","price":68.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/fc8d-5959f28f04a30.jpg?v=1760945006"},{"product_id":"kfi-54-inch-snow-plow-flap-kit","title":"KFI 54\" Snow Plow Flap Kit","description":"\u003cp\u003e\u003cstrong\u003eThe KFI 54-inch snow plow flap kit adds a 6.5-inch rubber flap to the top of a 54-inch KFI blade, so snow rolls forward instead of over the top.\u003c\/strong\u003e It includes an adjustable 11-gauge steel edge strip, a 2-3 ply rubber flap and hardware kit HK-102; KFI blades are pre-drilled for it.\u003c\/p\u003e\n\u003cp\u003eThe flap acts as a snow deflector and as an extension of the blade height.\u003c\/p\u003e\n\u003cp\u003eThis flap is a snow plow deflector for a 54-inch UTV plow blade or UTV snow plow blade. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e54-inch length\u003c\/li\u003e\n\u003cli\u003e6.5-inch 2-3 ply rubber flap\u003c\/li\u003e\n\u003cli\u003eAdjustable 11-gauge steel edge strip\u003c\/li\u003e\n\u003cli\u003eTwo-way adjustable\u003c\/li\u003e\n\u003cli\u003eHardware kit HK-102 included; KFI blades are pre-drilled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Snow Spilling Over the Blade\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSnow coming over the top of the blade toward the windshield\u003c\/li\u003e\n\u003cli\u003eLight snow blowing back over the plow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Owners of 54\" KFI Plow Blades\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners of 54-inch KFI blades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: snow plow flap kit\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eLength: 54 inches\u003c\/li\u003e\n\u003cli\u003eFlap: 6.5-inch, 2-3 ply rubber\u003c\/li\u003e\n\u003cli\u003eEdge strip: 11-gauge steel, adjustable\u003c\/li\u003e\n\u003cli\u003eIncluded: flap, edge strip, hardware kit HK-102\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105014\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e54-inch KFI plow blades (pre-drilled)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKFI sells flap kits in 48, 54, 60, 66 and 72 inches. Match the kit to your blade width. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat does a plow flap do?\u003c\/h3\u003e\n\u003cp\u003eIt stops snow from coming over the top of the blade and adds height to the blade.\u003c\/p\u003e\n\u003ch3\u003eDo I need to drill?\u003c\/h3\u003e\n\u003cp\u003eNo. KFI blades are pre-drilled, and hardware kit HK-102 is included.\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch your blade: this is the 54-inch kit.\u003c\/p\u003e\n\u003ch3\u003eIs it adjustable?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI lists it as two-way adjustable.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 105014, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAdd a Snow Deflector to Your 54\" KFI Blade\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI 54-inch flap kit for your blade. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does a plow flap do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It stops snow from coming over the top of the blade and adds height to the blade.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need to drill?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. KFI blades are pre-drilled, and hardware kit HK-102 is included.\"}}, {\"@type\": \"Question\", \"name\": \"Which size do I need?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Match your blade: this is the 54-inch kit.\"}}, {\"@type\": \"Question\", \"name\": \"Is it adjustable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI lists it as two-way adjustable.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 105014, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528561188,"sku":"105014","price":66.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/48e2-59510d936eb2f.jpg?v=1760945011"},{"product_id":"kfi-66-inch-snow-plow-flap-kit","title":"KFI 66\" Snow Plow Flap Kit","description":"\u003cp\u003e\u003cstrong\u003eThe KFI 66-inch snow plow flap kit adds a 6.5-inch rubber flap to the top of a 66-inch KFI blade, so snow rolls forward instead of over the top.\u003c\/strong\u003e It includes an adjustable 11-gauge steel edge strip, a 2-3 ply rubber flap and hardware kit HK-102; KFI blades are pre-drilled for it.\u003c\/p\u003e\n\u003cp\u003eThe flap acts as a snow deflector and as an extension of the blade height.\u003c\/p\u003e\n\u003cp\u003eThis flap is a snow plow deflector for a 66-inch UTV plow blade or UTV snow plow blade. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e66-inch length\u003c\/li\u003e\n\u003cli\u003e6.5-inch 2-3 ply rubber flap\u003c\/li\u003e\n\u003cli\u003eAdjustable 11-gauge steel edge strip\u003c\/li\u003e\n\u003cli\u003eTwo-way adjustable\u003c\/li\u003e\n\u003cli\u003eHardware kit HK-102 included; KFI blades are pre-drilled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Snow Spilling Over the Blade\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSnow coming over the top of the blade toward the windshield\u003c\/li\u003e\n\u003cli\u003eLight snow blowing back over the plow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Owners of 66\" KFI Plow Blades\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners of 66-inch KFI blades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: snow plow flap kit\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eLength: 66 inches\u003c\/li\u003e\n\u003cli\u003eFlap: 6.5-inch, 2-3 ply rubber\u003c\/li\u003e\n\u003cli\u003eEdge strip: 11-gauge steel, adjustable\u003c\/li\u003e\n\u003cli\u003eIncluded: flap, edge strip, hardware kit HK-102\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105835\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e66-inch KFI plow blades (pre-drilled)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKFI sells flap kits in 48, 54, 60, 66 and 72 inches. Match the kit to your blade width. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat does a plow flap do?\u003c\/h3\u003e\n\u003cp\u003eIt stops snow from coming over the top of the blade and adds height to the blade.\u003c\/p\u003e\n\u003ch3\u003eDo I need to drill?\u003c\/h3\u003e\n\u003cp\u003eNo. KFI blades are pre-drilled, and hardware kit HK-102 is included.\u003c\/p\u003e\n\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\n\u003cp\u003eMatch your blade: this is the 66-inch kit.\u003c\/p\u003e\n\u003ch3\u003eIs it adjustable?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI lists it as two-way adjustable.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 105835, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eAdd a Snow Deflector to Your 66\" KFI Blade\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI 66-inch flap kit for your blade. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does a plow flap do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It stops snow from coming over the top of the blade and adds height to the blade.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need to drill?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. KFI blades are pre-drilled, and hardware kit HK-102 is included.\"}}, {\"@type\": \"Question\", \"name\": \"Which size do I need?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Match your blade: this is the 66-inch kit.\"}}, {\"@type\": \"Question\", \"name\": \"Is it adjustable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI lists it as two-way adjustable.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 105835, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528593956,"sku":"105835","price":72.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/72flap_6a6ff87d-a372-4f50-b4d0-29ac83dedd81.png?v=1783026866"},{"product_id":"kfi-48-plow-flap-kit-rubber-snow-flap","title":"KFI 48\" Plow Flap Kit - Rubber Snow Flap","description":"\u003cp\u003e\u003cstrong\u003eThe KFI 48 in. plow flap kit adds a 6.5 in. rubber snow flap to a 48 in. KFI plow blade,\u003c\/strong\u003e helping hold snow in front of the blade and extending its working height. The kit bolts to the pre-drilled KFI blade with the included hardware and adjusts two ways.\u003c\/p\u003e\u003cp\u003eIf you are shopping for UTV snow plow accessories or a plow flap kit for a 48 in. KFI blade, this is the KFI kit sized for that blade.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e11-gauge steel adjustable snow flap edge strip\u003c\/li\u003e\n\u003cli\u003e6.5 in. 2-3 ply rubber flap that acts as a snow flap and blade extension\u003c\/li\u003e\n\u003cli\u003eHK-102 mounting hardware included; KFI blades are pre-drilled\u003c\/li\u003e\n\u003cli\u003eTwo-way adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eBuilt To Solve: Snow Spilling Over a 48 in. KFI Plow Blade\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSnow rolling over the top of the blade on deeper passes\u003c\/li\u003e\n\u003cli\u003eExtra passes needed to clear a drive\u003c\/li\u003e\n\u003cli\u003eA worn or missing factory flap\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eBest For: KFI 48 in. Plow Blade Owners\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOwners of a KFI 48 in. plow blade who clear driveways and paths\u003c\/li\u003e\n\u003cli\u003eRiders replacing a worn KFI flap before winter\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eBlade width: 48 in.\u003c\/li\u003e\n\u003cli\u003eEdge strip: 11GA steel, adjustable\u003c\/li\u003e\n\u003cli\u003eFlap: 6.5 in. 2-3 ply rubber\u003c\/li\u003e\n\u003cli\u003eHardware: HK-102 included\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105135\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eKFI 48 in. plow blades\u003c\/strong\u003e (pre-drilled)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFitment is taken from KFI data. Not guaranteed on non-KFI blades.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhat blade does the 48 in. flap kit fit?\u003c\/h3\u003e\u003cp\u003eKFI lists this as the flap kit for its 48 in. plow blades. KFI blades are pre-drilled for the kit.\u003c\/p\u003e\u003ch3\u003eWhat comes in the kit?\u003c\/h3\u003e\u003cp\u003eAn 11-gauge steel adjustable snow flap edge strip, a 6.5 in. 2-3 ply rubber flap, and the HK-102 mounting hardware, per KFI.\u003c\/p\u003e\u003ch3\u003eWhat does the rubber flap do?\u003c\/h3\u003e\u003cp\u003eKFI says it acts as a snow flap and as an extension to the plow blade, helping hold snow in front of the blade.\u003c\/p\u003e\u003ch3\u003eIs the flap adjustable?\u003c\/h3\u003e\u003cp\u003eYes. KFI describes the kit as two-way adjustable.\u003c\/p\u003e\u003ch3\u003eDo you have flap kits for larger blades?\u003c\/h3\u003e\u003cp\u003eKFI makes the same kit for 54, 60, 66 and 72 in. blades; choose the size that matches your blade width.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eWhy KFI\u003c\/h2\u003e\u003cp\u003eKFI designs and builds UTV plow systems, push tubes, plow mounts and winch mounts, and publishes replacement parts so a plow can be kept in service instead of replaced.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eFinish Your KFI 48 in. Plow Blade Setup\u003c\/h2\u003e\u003cp\u003eMatch this flap kit to a 48 in. KFI blade; KFI makes 54, 60, 66 and 72 in. versions for wider blades. Pair it with a plow pulley and a KFI push tube for a complete setup. Order from Dunes 2 Dezert SXS and we will ship it to you.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What blade does the 48 in. flap kit fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists this as the flap kit for its 48 in. plow blades. KFI blades are pre-drilled for the kit.\"}}, {\"@type\": \"Question\", \"name\": \"What comes in the kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"An 11-gauge steel adjustable snow flap edge strip, a 6.5 in. 2-3 ply rubber flap, and the HK-102 mounting hardware, per KFI.\"}}, {\"@type\": \"Question\", \"name\": \"What does the rubber flap do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI says it acts as a snow flap and as an extension to the plow blade, helping hold snow in front of the blade.\"}}, {\"@type\": \"Question\", \"name\": \"Is the flap adjustable?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI describes the kit as two-way adjustable.\"}}, {\"@type\": \"Question\", \"name\": \"Do you have flap kits for larger blades?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI makes the same kit for 54, 60, 66 and 72 in. blades; choose the size that matches your blade width.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528626724,"sku":"105135","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/55bb-5959f28dc2ad1.jpg?v=1760945020"},{"product_id":"kfi-pro-s-tapered-plow-side-shield","title":"KFI Pro-S Tapered Plow Side Shield (Each)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Pro-S tapered side shield bolts to the end of a Pro-S steel plow blade to stop snow and dirt from spilling off the side.\u003c\/strong\u003e It is 3\/16-inch grade 50 steel, adds 2-1\/4 inches of width per shield, and fits either end.\u003c\/p\u003e\n\u003cp\u003eSold one per package; buy two for both ends. For a square box-end shield, KFI makes 106475.\u003c\/p\u003e\n\u003cp\u003eA snow plow side shield works like small UTV plow wings or UTV snow plow wings at the blade end, one of the simplest UTV plow extensions. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReduces snow and dirt spillover at the blade end\u003c\/li\u003e\n\u003cli\u003eUniversal left or right (1 shield included)\u003c\/li\u003e\n\u003cli\u003e3\/16-inch grade 50 steel, powder coated black\u003c\/li\u003e\n\u003cli\u003eAdds 2-1\/4 inches of width per shield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Snow Spilling Off the End of the Blade\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWindrows spilling back into the cleared path\u003c\/li\u003e\n\u003cli\u003ePushing snow straight ahead with no containment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Pro-S Steel Blade Owners\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOwners pushing snow straight to a pile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: plow side shield\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eMaterial: 3\/16-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eWidth added: 2-1\/4 inches per shield\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 (left or right)\u003c\/li\u003e\n\u003cli\u003eIncluded: shield, upper \/ middle \/ lower brackets, carriage bolts and nylock nuts\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105540\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI Pro-S straight blades 105048, 105054, 105060, 105066 and 105072\u003c\/li\u003e\n\u003cli\u003eMoose straight blades (except 42-inch)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDrilling: KFI lists some drilling required; the instructions mark the blade with a paper template and drill with a 21\/64- to 3\/8-inch bit. Not for Pro-Poly blades, which use their own side shields. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs it sold as a pair?\u003c\/h3\u003e\n\u003cp\u003eNo, one shield per package; it fits either end.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI's template-guided install drills the blade with a 21\/64- to 3\/8-inch bit.\u003c\/p\u003e\n\u003ch3\u003eDoes it fit Pro-Poly blades?\u003c\/h3\u003e\n\u003cp\u003eNo. It is for Pro-S steel blades and Moose straight blades except the 42-inch.\u003c\/p\u003e\n\u003ch3\u003eHow much width does it add?\u003c\/h3\u003e\n\u003cp\u003e2-1\/4 inches per shield.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 105540, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eContain the Snow at Your Blade Ends\u003c\/h2\u003e\n\u003cp\u003eOrder one KFI Pro-S tapered side shield for each end you want covered. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is it sold as a pair?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No, one shield per package; it fits either end.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI's template-guided install drills the blade with a 21\/64- to 3\/8-inch bit.\"}}, {\"@type\": \"Question\", \"name\": \"Does it fit Pro-Poly blades?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It is for Pro-S steel blades and Moose straight blades except the 42-inch.\"}}, {\"@type\": \"Question\", \"name\": \"How much width does it add?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"2-1\/4 inches per shield.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 105540, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528659492,"sku":"105540","price":50.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/36245fcc385cab5d74a9c4f57bf65d53.png?v=1765154233"},{"product_id":"kfi-72-inch-pro-poly-utv-straight-plow-blade","title":"KFI 72\" Pro-Poly UTV Straight Plow Blade","description":"\u003cp\u003e\u003cstrong\u003eThe KFI 72-inch Pro-Poly blade is a straight UTV plow blade with a slick, replaceable poly face on a welded steel frame.\u003c\/strong\u003e It ships with a reversible 2-piece wear bar already installed, plus a flap kit, plow markers and a skid kit in the box.\u003c\/p\u003e\n\u003cp\u003eSnow slides off poly instead of sticking, so the blade rolls snow farther with less effort. Pair it with a KFI push tube and the mount for your machine.\u003c\/p\u003e\n\u003cp\u003eThis UTV plow blade is KFI's poly plow blade line: a 72-inch UTV snow plow blade (a 72 inch UTV plow blade, the size people search as UTV snow plow 72). KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e72-inch straight blade for UTVs\u003c\/li\u003e\n\u003cli\u003eWelded steel blade frame with a replaceable poly blade face\u003c\/li\u003e\n\u003cli\u003eReversible 2-piece wear bar, pre-installed\u003c\/li\u003e\n\u003cli\u003ePlow flap kit included (rubber flap, edge trim and hardware HK-102)\u003c\/li\u003e\n\u003cli\u003ePlow marker kit 105810 included\u003c\/li\u003e\n\u003cli\u003ePlow skid kit 105170-R included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Snow Sticking to the Blade on a 72\" UTV Plow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWet snow sticking to a steel moldboard\u003c\/li\u003e\n\u003cli\u003eWorn cutting edges\u003c\/li\u003e\n\u003cli\u003eBuying flaps, markers and skids separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: UTV Owners Who Want a 72\" Poly Blade\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUTVs where a 72-inch blade clears the tires when angled\u003c\/li\u003e\n\u003cli\u003eOwners plowing wet, heavy snow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV straight plow blade\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eWidth: 72 inches\u003c\/li\u003e\n\u003cli\u003eConstruction: welded steel frame with replaceable poly face\u003c\/li\u003e\n\u003cli\u003eWear bar: reversible 2-piece, pre-installed (106272)\u003c\/li\u003e\n\u003cli\u003eIncluded: flap kit, plow marker kit 105810, skid kit 105170-R\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105872\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI UTV push tubes 106300 and 105635\u003c\/li\u003e\n\u003cli\u003eKFI vehicle-specific UTV plow mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe push tube and vehicle mount are sold separately. Choose a width that clears your tires at full angle. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eThe blade with a pre-installed reversible wear bar, a flap kit, a plow marker kit and a skid kit.\u003c\/p\u003e\n\u003ch3\u003eWhy poly instead of steel?\u003c\/h3\u003e\n\u003cp\u003eSnow slides off poly more easily, and the poly face can be replaced.\u003c\/p\u003e\n\u003ch3\u003eWhat do I need to mount it?\u003c\/h3\u003e\n\u003cp\u003eA KFI UTV push tube and the KFI plow mount for your machine, plus a winch.\u003c\/p\u003e\n\u003ch3\u003eCan I flip the wear bar?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI says the wear bar is reversible to extend its life.\u003c\/p\u003e\n\u003ch3\u003eWhich accessories fit Pro-Poly blades?\u003c\/h3\u003e\n\u003cp\u003ePro-Poly markers (106505, 106510), curb guards 106155, Pro-Poly side shields, and skids 105170-R. Pro-S steel markers do not fit.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your KFI UTV Plow Around the 72\" Pro-Poly Blade\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI 72-inch Pro-Poly blade, then add the push tube and the mount for your UTV. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The blade with a pre-installed reversible wear bar, a flap kit, a plow marker kit and a skid kit.\"}}, {\"@type\": \"Question\", \"name\": \"Why poly instead of steel?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Snow slides off poly more easily, and the poly face can be replaced.\"}}, {\"@type\": \"Question\", \"name\": \"What do I need to mount it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A KFI UTV push tube and the KFI plow mount for your machine, plus a winch.\"}}, {\"@type\": \"Question\", \"name\": \"Can I flip the wear bar?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI says the wear bar is reversible to extend its life.\"}}, {\"@type\": \"Question\", \"name\": \"Which accessories fit Pro-Poly blades?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Pro-Poly markers (106505, 106510), curb guards 106155, Pro-Poly side shields, and skids 105170-R. Pro-S steel markers do not fit.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528692260,"sku":"105872","price":615.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/02b9-5950b81bd735f.jpg?v=1760945029"},{"product_id":"kfi-66-inch-pro-poly-utv-straight-plow-blade","title":"KFI 66\" Pro-Poly UTV Straight Plow Blade","description":"\u003cp\u003e\u003cstrong\u003eThe KFI 66-inch Pro-Poly blade is a straight UTV plow blade with a slick, replaceable poly face on a welded steel frame.\u003c\/strong\u003e It ships with a reversible 2-piece wear bar already installed, plus a flap kit, plow markers and a skid kit in the box.\u003c\/p\u003e\n\u003cp\u003eSnow slides off poly instead of sticking, so the blade rolls snow farther with less effort. Pair it with a KFI push tube and the mount for your machine.\u003c\/p\u003e\n\u003cp\u003eThis UTV plow blade is KFI's poly plow blade line: a 66-inch UTV snow plow blade (a 66 inch plow blade). KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e66-inch straight blade for UTVs\u003c\/li\u003e\n\u003cli\u003eWelded steel blade frame with a replaceable poly blade face\u003c\/li\u003e\n\u003cli\u003eReversible 2-piece wear bar, pre-installed\u003c\/li\u003e\n\u003cli\u003ePlow flap kit included (rubber flap, edge trim and hardware HK-102)\u003c\/li\u003e\n\u003cli\u003ePlow marker kit 105810 included\u003c\/li\u003e\n\u003cli\u003ePlow skid kit 105170-R included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Snow Sticking to the Blade on a 66\" UTV Plow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWet snow sticking to a steel moldboard\u003c\/li\u003e\n\u003cli\u003eWorn cutting edges\u003c\/li\u003e\n\u003cli\u003eBuying flaps, markers and skids separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: UTV Owners Who Want a 66\" Poly Blade\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUTVs where a 66-inch blade clears the tires when angled\u003c\/li\u003e\n\u003cli\u003eOwners plowing wet, heavy snow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV straight plow blade\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eWidth: 66 inches\u003c\/li\u003e\n\u003cli\u003eConstruction: welded steel frame with replaceable poly face\u003c\/li\u003e\n\u003cli\u003eWear bar: reversible 2-piece, pre-installed\u003c\/li\u003e\n\u003cli\u003eIncluded: flap kit, plow marker kit 105810, skid kit 105170-R\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105866\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI UTV push tubes 106300 and 105635\u003c\/li\u003e\n\u003cli\u003eKFI vehicle-specific UTV plow mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe push tube and vehicle mount are sold separately. Choose a width that clears your tires at full angle. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eThe blade with a pre-installed reversible wear bar, a flap kit, a plow marker kit and a skid kit.\u003c\/p\u003e\n\u003ch3\u003eWhy poly instead of steel?\u003c\/h3\u003e\n\u003cp\u003eSnow slides off poly more easily, and the poly face can be replaced.\u003c\/p\u003e\n\u003ch3\u003eWhat do I need to mount it?\u003c\/h3\u003e\n\u003cp\u003eA KFI UTV push tube and the KFI plow mount for your machine, plus a winch.\u003c\/p\u003e\n\u003ch3\u003eCan I flip the wear bar?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI says the wear bar is reversible to extend its life.\u003c\/p\u003e\n\u003ch3\u003eWhich accessories fit Pro-Poly blades?\u003c\/h3\u003e\n\u003cp\u003ePro-Poly markers (106505, 106510), curb guards 106155, Pro-Poly side shields, and skids 105170-R. Pro-S steel markers do not fit.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your KFI UTV Plow Around the 66\" Pro-Poly Blade\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI 66-inch Pro-Poly blade, then add the push tube and the mount for your UTV. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The blade with a pre-installed reversible wear bar, a flap kit, a plow marker kit and a skid kit.\"}}, {\"@type\": \"Question\", \"name\": \"Why poly instead of steel?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Snow slides off poly more easily, and the poly face can be replaced.\"}}, {\"@type\": \"Question\", \"name\": \"What do I need to mount it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A KFI UTV push tube and the KFI plow mount for your machine, plus a winch.\"}}, {\"@type\": \"Question\", \"name\": \"Can I flip the wear bar?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI says the wear bar is reversible to extend its life.\"}}, {\"@type\": \"Question\", \"name\": \"Which accessories fit Pro-Poly blades?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Pro-Poly markers (106505, 106510), curb guards 106155, Pro-Poly side shields, and skids 105170-R. Pro-S steel markers do not fit.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528757796,"sku":"105866","price":589.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/b690-5b04575ab8d70.jpg?v=1760945034"},{"product_id":"kfi-60-inch-pro-poly-utv-straight-plow-blade","title":"KFI 60\" Pro-Poly UTV Straight Plow Blade","description":"\u003cp\u003e\u003cstrong\u003eThe KFI 60-inch Pro-Poly blade is a straight UTV plow blade with a slick, replaceable poly face on a welded steel frame.\u003c\/strong\u003e It ships with a reversible 2-piece wear bar already installed, plus a flap kit, plow markers and a skid kit in the box.\u003c\/p\u003e\n\u003cp\u003eSnow slides off poly instead of sticking, so the blade rolls snow farther with less effort. Pair it with a KFI push tube and the mount for your machine.\u003c\/p\u003e\n\u003cp\u003eThis UTV plow blade is KFI's poly plow blade line: a 60-inch UTV snow plow blade (a 60 inch plow blade). KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e60-inch straight blade for UTVs\u003c\/li\u003e\n\u003cli\u003eWelded steel blade frame with a replaceable poly blade face\u003c\/li\u003e\n\u003cli\u003eReversible 2-piece wear bar, pre-installed\u003c\/li\u003e\n\u003cli\u003ePlow flap kit included (rubber flap, edge trim and hardware HK-102)\u003c\/li\u003e\n\u003cli\u003ePlow marker kit 105810 included\u003c\/li\u003e\n\u003cli\u003ePlow skid kit 105170-R included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Snow Sticking to the Blade on a 60\" UTV Plow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWet snow sticking to a steel moldboard\u003c\/li\u003e\n\u003cli\u003eWorn cutting edges\u003c\/li\u003e\n\u003cli\u003eBuying flaps, markers and skids separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: UTV Owners Who Want a 60\" Poly Blade\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUTVs where a 60-inch blade clears the tires when angled\u003c\/li\u003e\n\u003cli\u003eOwners plowing wet, heavy snow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV straight plow blade\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eWidth: 60 inches\u003c\/li\u003e\n\u003cli\u003eConstruction: welded steel frame with replaceable poly face\u003c\/li\u003e\n\u003cli\u003eWear bar: reversible 2-piece, pre-installed (106260)\u003c\/li\u003e\n\u003cli\u003eIncluded: flap kit, plow marker kit 105810, skid kit 105170-R\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105860\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI UTV push tubes 106300 and 105635\u003c\/li\u003e\n\u003cli\u003eKFI vehicle-specific UTV plow mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe push tube and vehicle mount are sold separately. Choose a width that clears your tires at full angle. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eThe blade with a pre-installed reversible wear bar, a flap kit, a plow marker kit and a skid kit.\u003c\/p\u003e\n\u003ch3\u003eWhy poly instead of steel?\u003c\/h3\u003e\n\u003cp\u003eSnow slides off poly more easily, and the poly face can be replaced.\u003c\/p\u003e\n\u003ch3\u003eWhat do I need to mount it?\u003c\/h3\u003e\n\u003cp\u003eA KFI UTV push tube and the KFI plow mount for your machine, plus a winch.\u003c\/p\u003e\n\u003ch3\u003eCan I flip the wear bar?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI says the wear bar is reversible to extend its life.\u003c\/p\u003e\n\u003ch3\u003eWhich accessories fit Pro-Poly blades?\u003c\/h3\u003e\n\u003cp\u003ePro-Poly markers (106505, 106510), curb guards 106155, Pro-Poly side shields, and skids 105170-R. Pro-S steel markers do not fit.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your KFI UTV Plow Around the 60\" Pro-Poly Blade\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI 60-inch Pro-Poly blade, then add the push tube and the mount for your UTV. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The blade with a pre-installed reversible wear bar, a flap kit, a plow marker kit and a skid kit.\"}}, {\"@type\": \"Question\", \"name\": \"Why poly instead of steel?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Snow slides off poly more easily, and the poly face can be replaced.\"}}, {\"@type\": \"Question\", \"name\": \"What do I need to mount it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A KFI UTV push tube and the KFI plow mount for your machine, plus a winch.\"}}, {\"@type\": \"Question\", \"name\": \"Can I flip the wear bar?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI says the wear bar is reversible to extend its life.\"}}, {\"@type\": \"Question\", \"name\": \"Which accessories fit Pro-Poly blades?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Pro-Poly markers (106505, 106510), curb guards 106155, Pro-Poly side shields, and skids 105170-R. Pro-S steel markers do not fit.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528790564,"sku":"105860","price":542.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/b690-5b04575ab8d70_15fdd300-2b55-44a6-8a7b-b71753f36e17.jpg?v=1760945038"},{"product_id":"kfi-polaris-xpedition-adv-xp-utv-plow-mount","title":"KFI Polaris Xpedition ADV \/ XP UTV Plow Mount (2024-2027)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Polaris Xpedition plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Polaris Xpedition can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Polaris Xpedition ADV, ADV 5, XP and XP 5, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. If you are shopping for a Polaris Xpedition plow, this is the mount KFI lists for the ADV and XP.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Polaris Xpedition ADV, ADV 5, XP and XP 5\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Polaris Xpedition\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Polaris Xpedition\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Polaris Xpedition Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris Xpedition owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: plow mount and mounting hardware\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106615\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris Xpedition ADV and ADV 5 (2024-2027)\u003c\/li\u003e\n\u003cli\u003ePolaris Xpedition XP and XP 5 (2024-2027)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKFI recommends adding the 102265 roller conversion bracket. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Polaris Xpedition?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: Polaris Xpedition ADV and ADV 5 (2024-2027); Polaris Xpedition XP and XP 5 (2024-2027). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Polaris Xpedition?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eKFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Polaris Xpedition?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Polaris Xpedition Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Polaris Xpedition plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Polaris Xpedition?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: Polaris Xpedition ADV and ADV 5 (2024-2027); Polaris Xpedition XP and XP 5 (2024-2027). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Polaris Xpedition?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Polaris Xpedition?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528823332,"sku":"106615","price":132.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/c702-65550c27db92b.png?v=1760945044"},{"product_id":"kfi-polaris-rzr-xp-1000-xp-4-utv-plow-mount","title":"KFI Polaris RZR XP 1000 \/ XP 4 UTV Plow Mount (2024-2025)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Polaris RZR XP 1000 plow mount is the vehicle-side base for a KFI UTV snow plow on the 2024-2025 RZR XP 1000 and XP 4 1000.\u003c\/strong\u003e It is listed for the 2024-2025 Polaris RZR XP 1000 and RZR XP 4 1000, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a Polaris RZR snow plow on the 2024-2025 XP 1000: polaris rzr xp 1000 plow and rzr snow plow shoppers start with this polaris rzr plow mount, the first piece of a polaris rzr snow plow kit.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the 2024-2025 Polaris RZR XP 1000 and RZR XP 4 1000\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Polaris RZR XP 1000 (2024+)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Polaris RZR XP 1000 (2024+)\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Polaris RZR XP 1000 (2024+) Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris RZR XP 1000 (2024+) owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: frame mount, plow mount and hardware kit HK-435\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106610\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRZR XP 1000 Sport \/ Premium \/ Ultimate (2024-2025)\u003c\/li\u003e\n\u003cli\u003eRZR XP 4 1000 Sport \/ Premium \/ Ultimate (2024-2025)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Polaris RZR XP 1000 (2024+)?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: RZR XP 1000 Sport \/ Premium \/ Ultimate (2024-2025); RZR XP 4 1000 Sport \/ Premium \/ Ultimate (2024-2025). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Polaris RZR XP 1000 (2024+)?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eKFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Polaris RZR XP 1000 (2024+)?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Polaris RZR XP 1000 (2024+) Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Polaris RZR XP 1000 (2024+) plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Polaris RZR XP 1000 (2024+)?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: RZR XP 1000 Sport \/ Premium \/ Ultimate (2024-2025); RZR XP 4 1000 Sport \/ Premium \/ Ultimate (2024-2025). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Polaris RZR XP 1000 (2024+)?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Polaris RZR XP 1000 (2024+)?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528856100,"sku":"106610","price":132.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/bb9c-65550c27e2e5b.png?v=1760945049"},{"product_id":"kfi-cfmoto-zforce-800-950-g2-utv-plow-mount","title":"KFI CFMOTO ZForce 800\/950 G2 UTV Plow Mount (2023-2026)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI CFMOTO ZForce G2 plow mount is the vehicle-side base for a KFI UTV snow plow, built so your CFMOTO ZForce G2 can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the 2023-2026 CFMOTO ZForce 800 Trail and ZForce 950 Sport, Sport 4 and Trail (G2), and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a CFMOTO ZForce 950 plow or CFMOTO ZForce plow on G2 machines, so cfmoto snow plow and cf moto snow plow shoppers with a 2023-or-newer ZForce start here.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the 2023-2026 CFMOTO ZForce 800 Trail and ZForce 950 Sport, Sport 4 and Trail (G2)\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the CFMOTO ZForce G2\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the CFMOTO ZForce G2\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: CFMOTO ZForce G2 Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCFMOTO ZForce G2 owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: plow mount, 12-inch soft strap and hardware kit HK-431\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106605\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eZForce 800 Trail G2 (2023-2026)\u003c\/li\u003e\n\u003cli\u003eZForce 950 Sport G2 (2023-2026)\u003c\/li\u003e\n\u003cli\u003eZForce 950 Sport 4 G2 (2024-2026)\u003c\/li\u003e\n\u003cli\u003eZForce 950 Trail G2 (2023-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMay require drilling. KFI recommends adding the 105270 plow pulley if you run a steel cable winch, or the 106745 Quick Plow Pulley for synthetic rope. Drilling: Yes. KFI's instructions use the plow mount as a template to drill the bottom holes through the frame with a 13\/32-inch bit. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my CFMOTO ZForce G2?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: ZForce 800 Trail G2 (2023-2026); ZForce 950 Sport G2 (2023-2026); ZForce 950 Sport 4 G2 (2024-2026); ZForce 950 Trail G2 (2023-2026). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my CFMOTO ZForce G2?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI's instructions use the plow mount as a template to drill the bottom holes through the frame with a 13\/32-inch bit.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my CFMOTO ZForce G2?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your CFMOTO ZForce G2 Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI CFMOTO ZForce G2 plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my CFMOTO ZForce G2?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: ZForce 800 Trail G2 (2023-2026); ZForce 950 Sport G2 (2023-2026); ZForce 950 Sport 4 G2 (2024-2026); ZForce 950 Trail G2 (2023-2026). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my CFMOTO ZForce G2?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI's instructions use the plow mount as a template to drill the bottom holes through the frame with a 13\/32-inch bit.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my CFMOTO ZForce G2?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528888868,"sku":"106605","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/8a14-64e3898ca20e0.png?v=1760945054"},{"product_id":"kfi-cfmoto-zforce-500-800-1000-utv-plow-mount","title":"KFI CFMOTO ZForce 500\/800\/1000 UTV Plow Mount (2014-2023)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI CFMOTO ZForce plow mount is the vehicle-side base for a KFI UTV snow plow, built so your CFMOTO ZForce can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the CFMOTO ZForce 500, 800 (G1) and 1000 models listed below, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a CFMOTO ZForce plow on G1 machines: cfmoto zforce 800 plow, cfmoto snow plow and cf moto snow plow shoppers with these years start here.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the CFMOTO ZForce 500, 800 (G1) and 1000 models listed below\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the CFMOTO ZForce\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the CFMOTO ZForce\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: CFMOTO ZForce Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCFMOTO ZForce owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: plow mount (106601), 12-inch soft strap (106470) and hardware kit HK-438 (U-bolts)\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eZForce 500 Trail (2016-2022; 2023 Canada only)\u003c\/li\u003e\n\u003cli\u003eZForce 800 Base \/ EX \/ Trail, G1 (2014-2022; 2023 Trail G1 Canada only)\u003c\/li\u003e\n\u003cli\u003eZForce 1000 (2018-2019)\u003c\/li\u003e\n\u003cli\u003eZForce 1000 Classic (2021, Canada only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMay require drilling. KFI lists it as the direct replacement for plow mount 105645. Drilling: Yes. KFI's instructions mark the rear inner U-bolt holes on the skid plate and drill them with at least a 7\/16-inch bit. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my CFMOTO ZForce?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: ZForce 500 Trail (2016-2022; 2023 Canada only); ZForce 800 Base \/ EX \/ Trail, G1 (2014-2022; 2023 Trail G1 Canada only); ZForce 1000 (2018-2019); ZForce 1000 Classic (2021, Canada only). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my CFMOTO ZForce?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI's instructions mark the rear inner U-bolt holes on the skid plate and drill them with at least a 7\/16-inch bit.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my CFMOTO ZForce?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your CFMOTO ZForce Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI CFMOTO ZForce plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my CFMOTO ZForce?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: ZForce 500 Trail (2016-2022; 2023 Canada only); ZForce 800 Base \/ EX \/ Trail, G1 (2014-2022; 2023 Trail G1 Canada only); ZForce 1000 (2018-2019); ZForce 1000 Classic (2021, Canada only). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my CFMOTO ZForce?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI's instructions mark the rear inner U-bolt holes on the skid plate and drill them with at least a 7\/16-inch bit.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my CFMOTO ZForce?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528921636,"sku":"106600","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/3a27-671958ae53038.png?v=1760945058"},{"product_id":"kfi-kawasaki-teryx-krx-1000-krx4-utv-plow-mount","title":"KFI Kawasaki Teryx KRX 1000 \/ KRX4 UTV Plow Mount (2020-2027)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Kawasaki Teryx KRX plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Kawasaki Teryx KRX can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Kawasaki Teryx KRX 1000 and KRX4 1000, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a KRX 1000 snow plow: kawasaki krx plow and kawasaki teryx krx plow shoppers, and anyone pricing a Kawasaki UTV snow plow for the KRX, start here.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Kawasaki Teryx KRX 1000 and KRX4 1000\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Kawasaki Teryx KRX\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Kawasaki Teryx KRX\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Kawasaki Teryx KRX Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKawasaki Teryx KRX owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: plow mount and hardware kit HK-372\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106295\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKawasaki Teryx KRX 1000, all models (2020-2027)\u003c\/li\u003e\n\u003cli\u003eKawasaki Teryx KRX4 1000, all models (2023-2027)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRequires a KFI 2-inch leveling kit: 106322 for the Pro 2.0 106300 tubes, or 105700 for the older round 105635 tubes. Drilling: Yes. KFI's instructions mark holes using the plow mount as a template and drill them with a 13\/32-inch bit. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Kawasaki Teryx KRX?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: Kawasaki Teryx KRX 1000, all models (2020-2027); Kawasaki Teryx KRX4 1000, all models (2023-2027). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Kawasaki Teryx KRX?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI's instructions mark holes using the plow mount as a template and drill them with a 13\/32-inch bit.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Kawasaki Teryx KRX?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Kawasaki Teryx KRX Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Kawasaki Teryx KRX plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Kawasaki Teryx KRX?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: Kawasaki Teryx KRX 1000, all models (2020-2027); Kawasaki Teryx KRX4 1000, all models (2023-2027). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Kawasaki Teryx KRX?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI's instructions mark holes using the plow mount as a template and drill them with a 13\/32-inch bit.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Kawasaki Teryx KRX?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734528987172,"sku":"106295","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/d9a9-62d835c77a156.png?v=1760945064"},{"product_id":"kfi-polaris-rzr-pro-xp-pro-xp-4-utv-plow-mount","title":"KFI Polaris RZR PRO XP \/ PRO XP 4 UTV Plow Mount (2020-2026)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Polaris RZR PRO XP plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Polaris RZR PRO XP can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Polaris RZR PRO XP and RZR PRO XP 4, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a Polaris RZR snow plow on the PRO XP: polaris rzr pro xp plow and rzr snow plow shoppers start with this polaris rzr plow mount.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Polaris RZR PRO XP and RZR PRO XP 4\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Polaris RZR PRO XP\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Polaris RZR PRO XP\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Polaris RZR PRO XP Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris RZR PRO XP owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: A-arm mount, plow mount and hardware kit HK-369\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106235\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRZR PRO XP: Base, LE, Premium, Ultimate, Sport (2020-2026)\u003c\/li\u003e\n\u003cli\u003eRZR PRO XP 4: Base, LE, Premium, Ultimate, Sport (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRequires a KFI 2-inch leveling kit: 106322 for the Pro 2.0 106300 tubes, or 105700 for the older round 105635 tubes. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Polaris RZR PRO XP?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: RZR PRO XP: Base, LE, Premium, Ultimate, Sport (2020-2026); RZR PRO XP 4: Base, LE, Premium, Ultimate, Sport (2020-2026). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Polaris RZR PRO XP?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eKFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Polaris RZR PRO XP?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Polaris RZR PRO XP Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Polaris RZR PRO XP plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Polaris RZR PRO XP?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: RZR PRO XP: Base, LE, Premium, Ultimate, Sport (2020-2026); RZR PRO XP 4: Base, LE, Premium, Ultimate, Sport (2020-2026). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Polaris RZR PRO XP?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Polaris RZR PRO XP?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734529019940,"sku":"106235","price":125.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/021e-62d835767c2c4.png?v=1760945069"},{"product_id":"kfi-polaris-ranger-1000-xp-1000-utv-plow-mount","title":"KFI Polaris Ranger 1000 \/ XP 1000 UTV Plow Mount (2018-2027)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Polaris Ranger 1000 plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Polaris Ranger 1000 can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Polaris Ranger 1000, Ranger XP 1000, Crew, Kinetic and Bobcat UV34 \/ 3400 \/ 3600 models listed below, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a Polaris Ranger 1000 snow plow or polaris ranger xp 1000 snow plow, so snow plow for polaris ranger 1000, snow plow for polaris ranger xp 1000 and plow for polaris ranger 1000 shoppers start with this polaris ranger plow mount. It also covers a bobcat 3400 snow plow setup.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Polaris Ranger 1000, Ranger XP 1000, Crew, Kinetic and Bobcat UV34 \/ 3400 \/ 3600 models listed below\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Polaris Ranger 1000\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Polaris Ranger 1000\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Polaris Ranger 1000 Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris Ranger 1000 owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: plow mount and hardware kit HK-391\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106165\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRanger 1000 Base (2020-2027, winch mount 101830)\u003c\/li\u003e\n\u003cli\u003eRanger 1000 EPS \/ Premium (2020-2027) and 1000 CAB (2026-2027)\u003c\/li\u003e\n\u003cli\u003eRanger Crew 1000 (2020-2022, 2024-2027, winch mount 101830)\u003c\/li\u003e\n\u003cli\u003eRanger Crew 1000 EPS (2020, 2025-2027) and Crew 1000 Premium (2020-2027)\u003c\/li\u003e\n\u003cli\u003eRanger Crew XP 1000, Northstar and Texas Edition (2019-2027) and Crew XP 1000 CAB (2027)\u003c\/li\u003e\n\u003cli\u003eRanger XP 1000: EPS, Premium, LE, Trail Boss (2018-2027) and XP 1000 CAB (2027)\u003c\/li\u003e\n\u003cli\u003eRanger XP 1000 Northstar (2018-2027; 2025-2027 needs 2-inch leveling kit)\u003c\/li\u003e\n\u003cli\u003eRanger XP 1000 Texas Edition (2020-2021)\u003c\/li\u003e\n\u003cli\u003eRanger XP Kinetic (2023-2027) and PRO XD Kinetic (2025)\u003c\/li\u003e\n\u003cli\u003eBobcat UV34 \/ 3400 and 3600 series (2015 to current, winch mount 101830)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMay require drilling. Models marked for winch mount 101830: Requires KFI winch mount 101830. 2025-2027 Ranger XP 1000 Northstar: Requires a KFI 2-inch leveling kit: 106322 for the Pro 2.0 106300 tubes, or 105700 for the older round 105635 tubes. Drilling: Yes. KFI's instructions use the plow mount as a template to drill holes with a 7\/16-inch bit. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Polaris Ranger 1000?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: Ranger 1000 Base (2020-2027, winch mount 101830); Ranger 1000 EPS \/ Premium (2020-2027) and 1000 CAB (2026-2027); Ranger Crew 1000 (2020-2022, 2024-2027, winch mount 101830); Ranger Crew 1000 EPS (2020, 2025-2027) and Crew 1000 Premium (2020-2027); Ranger Crew XP 1000, Northstar and Texas Edition (2019-2027) and Crew XP 1000 CAB (2027); Ranger XP 1000: EPS, Premium, LE, Trail Boss (2018-2027) and XP 1000 CAB (2027); Ranger XP 1000 Northstar (2018-2027; 2025-2027 needs 2-inch leveling kit); Ranger XP 1000 Texas Edition (2020-2021); Ranger XP Kinetic (2023-2027) and PRO XD Kinetic (2025); Bobcat UV34 \/ 3400 and 3600 series (2015 to current, winch mount 101830). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Polaris Ranger 1000?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI's instructions use the plow mount as a template to drill holes with a 7\/16-inch bit.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Polaris Ranger 1000?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Polaris Ranger 1000 Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Polaris Ranger 1000 plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Polaris Ranger 1000?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: Ranger 1000 Base (2020-2027, winch mount 101830); Ranger 1000 EPS \/ Premium (2020-2027) and 1000 CAB (2026-2027); Ranger Crew 1000 (2020-2022, 2024-2027, winch mount 101830); Ranger Crew 1000 EPS (2020, 2025-2027) and Crew 1000 Premium (2020-2027); Ranger Crew XP 1000, Northstar and Texas Edition (2019-2027) and Crew XP 1000 CAB (2027); Ranger XP 1000: EPS, Premium, LE, Trail Boss (2018-2027) and XP 1000 CAB (2027); Ranger XP 1000 Northstar (2018-2027; 2025-2027 needs 2-inch leveling kit); Ranger XP 1000 Texas Edition (2020-2021); Ranger XP Kinetic (2023-2027) and PRO XD Kinetic (2025); Bobcat UV34 \/ 3400 and 3600 series (2015 to current, winch mount 101830). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Polaris Ranger 1000?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI's instructions use the plow mount as a template to drill holes with a 7\/16-inch bit.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Polaris Ranger 1000?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734529085476,"sku":"106165","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/4bd50de243dcf7c58303ed171f4404f3.png?v=1765151741"},{"product_id":"kfi-polaris-general-xp-1000-xp-4-utv-plow-mount","title":"KFI Polaris General XP 1000 \/ XP 4 UTV Plow Mount (2020-2027)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Polaris General XP 1000 plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Polaris General XP 1000 can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Polaris General XP 1000 and General XP 4 1000, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a Polaris General snow plow on the XP 1000: this polaris general plow mount (or polaris general snow plow mount) takes the push tube for a polaris general xp 1000 snow plow or polaris general xp 1000 plow. Non-XP General 1000 models use KFI 105930.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Polaris General XP 1000 and General XP 4 1000\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Polaris General XP 1000\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Polaris General XP 1000\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Polaris General XP 1000 Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris General XP 1000 owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: frame bracket, plow mount, bolt plate, 3\/8-inch bolts and 2 M12 x 70mm bolts with nuts\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106160\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral XP 1000: Base, Deluxe, PE, Sport, Premium, Ultimate (2020-2027)\u003c\/li\u003e\n\u003cli\u003eGeneral XP 4 1000: Base, Deluxe, PE, Sport, Premium, Ultimate (2020-2027)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Polaris General XP 1000?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: General XP 1000: Base, Deluxe, PE, Sport, Premium, Ultimate (2020-2027); General XP 4 1000: Base, Deluxe, PE, Sport, Premium, Ultimate (2020-2027). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Polaris General XP 1000?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eKFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Polaris General XP 1000?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Polaris General XP 1000 Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Polaris General XP 1000 plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Polaris General XP 1000?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: General XP 1000: Base, Deluxe, PE, Sport, Premium, Ultimate (2020-2027); General XP 4 1000: Base, Deluxe, PE, Sport, Premium, Ultimate (2020-2027). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Polaris General XP 1000?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Polaris General XP 1000?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734529183780,"sku":"106160","price":125.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/c5ec-5f93446ea8478.jpg?v=1760945079"},{"product_id":"kfi-honda-talon-1000-1000-4-utv-plow-mount","title":"KFI Honda Talon 1000 \/ 1000-4 UTV Plow Mount (2019-2025)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Honda Talon plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Honda Talon can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Honda Talon 1000X, 1000R, 1000XS, 1000RS and Talon 1000-4, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a Honda Talon snow plow, so honda talon plow and honda snow plow shoppers with a Talon 1000 or 1000-4 start here.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Honda Talon 1000X, 1000R, 1000XS, 1000RS and Talon 1000-4\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Honda Talon\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Honda Talon\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Honda Talon Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHonda Talon owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: backer plate, mounting plate, front and rear bolt plates and hardware kit HK-363\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106075\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHonda Talon 1000 X \/ R \/ XS \/ RS (2019-2025)\u003c\/li\u003e\n\u003cli\u003eHonda Talon 1000-4 X \/ R \/ XS (2020-2025)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Honda Talon?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: Honda Talon 1000 X \/ R \/ XS \/ RS (2019-2025); Honda Talon 1000-4 X \/ R \/ XS (2020-2025). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Honda Talon?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eKFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Honda Talon?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Honda Talon Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Honda Talon plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Honda Talon?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: Honda Talon 1000 X \/ R \/ XS \/ RS (2019-2025); Honda Talon 1000-4 X \/ R \/ XS (2020-2025). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Honda Talon?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Honda Talon?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734529282084,"sku":"106075","price":132.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/0154-6047d6790e8ff.png?v=1760945085"},{"product_id":"kfi-arctic-cat-prowler-pro-plow-mount-receiver","title":"KFI Arctic Cat Prowler Pro Plow Mount \u0026 Receiver (2018-2027)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Arctic Cat Prowler Pro plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Arctic Cat Prowler Pro can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Arctic Cat Prowler Pro, Prowler Limited and Prowler XT, Cushman Hauler, Caterpillar CUV and Tracker 800SX, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for an Arctic Cat Prowler snow plow on the Prowler Pro, so arctic cat prowler pro plow and tracker 800sx plow shoppers start here, and the built-in hitch makes it a utv snow plow 2 inch receiver.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Arctic Cat Prowler Pro, Prowler Limited and Prowler XT, Cushman Hauler, Caterpillar CUV and Tracker 800SX\u003c\/li\u003e\n\u003cli\u003eIntegrated 2-inch lower receiver, so the mount also works as a front receiver hitch when the plow is off\u003c\/li\u003e\n\u003cli\u003ePlate made from 3\/16-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Arctic Cat Prowler Pro\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Arctic Cat Prowler Pro\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Arctic Cat Prowler Pro Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArctic Cat Prowler Pro owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount with integrated 2-inch lower receiver\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 3\/16-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: plow mount and hardware kit HK-011\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106000\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eArctic Cat Prowler Pro 4x4 (2018-2025)\u003c\/li\u003e\n\u003cli\u003eArctic Cat Prowler Pro 4x4 Crew (2019-2025)\u003c\/li\u003e\n\u003cli\u003eArctic Cat Prowler Limited and Limited Crew (2026)\u003c\/li\u003e\n\u003cli\u003eArctic Cat Prowler XT and XT Crew (2026-2027)\u003c\/li\u003e\n\u003cli\u003eCaterpillar CUV82, CUV85, CUV102 D and CUV105 D (all)\u003c\/li\u003e\n\u003cli\u003eCushman Hauler 4x4 and 4x4 Crew (2019-2020)\u003c\/li\u003e\n\u003cli\u003eTracker 800SX and 800SX Crew (2020-2025)\u003c\/li\u003e\n\u003cli\u003eTracker 800SX LE and LE Crew (2021-2025; brush guard may interfere)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Arctic Cat Prowler Pro?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: Arctic Cat Prowler Pro 4x4 (2018-2025); Arctic Cat Prowler Pro 4x4 Crew (2019-2025); Arctic Cat Prowler Limited and Limited Crew (2026); Arctic Cat Prowler XT and XT Crew (2026-2027); Caterpillar CUV82, CUV85, CUV102 D and CUV105 D (all); Cushman Hauler 4x4 and 4x4 Crew (2019-2020); Tracker 800SX and 800SX Crew (2020-2025); Tracker 800SX LE and LE Crew (2021-2025; brush guard may interfere). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Arctic Cat Prowler Pro?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eKFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\u003c\/p\u003e\n\u003ch3\u003eCan I use the receiver without the plow?\u003c\/h3\u003e\n\u003cp\u003eYes. The mount has an integrated 2-inch lower receiver, so it works as a front receiver hitch when the push tube is off.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Arctic Cat Prowler Pro?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Arctic Cat Prowler Pro Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Arctic Cat Prowler Pro plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Arctic Cat Prowler Pro?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: Arctic Cat Prowler Pro 4x4 (2018-2025); Arctic Cat Prowler Pro 4x4 Crew (2019-2025); Arctic Cat Prowler Limited and Limited Crew (2026); Arctic Cat Prowler XT and XT Crew (2026-2027); Caterpillar CUV82, CUV85, CUV102 D and CUV105 D (all); Cushman Hauler 4x4 and 4x4 Crew (2019-2020); Tracker 800SX and 800SX Crew (2020-2025); Tracker 800SX LE and LE Crew (2021-2025; brush guard may interfere). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Arctic Cat Prowler Pro?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\"}}, {\"@type\": \"Question\", \"name\": \"Can I use the receiver without the plow?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The mount has an integrated 2-inch lower receiver, so it works as a front receiver hitch when the push tube is off.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Arctic Cat Prowler Pro?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734529314852,"sku":"106000","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/022c-5c33c4d2e2b7b.jpg?v=1760945090"},{"product_id":"kfi-polaris-general-1000-rzr-900-1000-plow-mount","title":"KFI Polaris General 1000 \/ RZR 900-1000 Plow Mount (2015-2027)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Polaris General 1000 plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Polaris General 1000 can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Polaris General 1000 and General 4 1000 (non-XP) and dual rear A-arm RZR 900 and RZR 1000, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a Polaris General snow plow on the non-XP General 1000: this polaris general plow mount takes the push tube for a polaris general 1000 snow plow or polaris general 1000 plow. On the RZR side it is the polaris rzr plow mount for a rzr snow plow on dual A-arm 900 and 1000 models, so polaris rzr 1000 plow shoppers start here too.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Polaris General 1000 and General 4 1000 (non-XP) and dual rear A-arm RZR 900 and RZR 1000\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Polaris General 1000\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Polaris General 1000\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Polaris General 1000 Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris General 1000 owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: frame bracket, plow mount, bolt plate, 3\/8-inch bolts and washers, and 2 M10 x 100mm bolts with nuts\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105930\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral 1000, all non-XP models (2016-2027)\u003c\/li\u003e\n\u003cli\u003eGeneral 4 1000, all non-XP models (2017-2025)\u003c\/li\u003e\n\u003cli\u003eRZR 900 \/ S \/ Trail, dual rear A-arm (2015-2027)\u003c\/li\u003e\n\u003cli\u003eRZR 4 900 \/ S, dual rear A-arm (2015-2018)\u003c\/li\u003e\n\u003cli\u003eRZR 1000 \/ S \/ Trail, dual rear A-arm (2016-2027)\u003c\/li\u003e\n\u003cli\u003eRZR S 4 1000, dual rear A-arm (2019-2020)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKFI states this mount will not work on General XP models; the General XP 1000 uses KFI 106160. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Polaris General 1000?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: General 1000, all non-XP models (2016-2027); General 4 1000, all non-XP models (2017-2025); RZR 900 \/ S \/ Trail, dual rear A-arm (2015-2027); RZR 4 900 \/ S, dual rear A-arm (2015-2018); RZR 1000 \/ S \/ Trail, dual rear A-arm (2016-2027); RZR S 4 1000, dual rear A-arm (2019-2020). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Polaris General 1000?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eKFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Polaris General 1000?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Polaris General 1000 Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Polaris General 1000 plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Polaris General 1000?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: General 1000, all non-XP models (2016-2027); General 4 1000, all non-XP models (2017-2025); RZR 900 \/ S \/ Trail, dual rear A-arm (2015-2027); RZR 4 900 \/ S, dual rear A-arm (2015-2018); RZR 1000 \/ S \/ Trail, dual rear A-arm (2016-2027); RZR S 4 1000, dual rear A-arm (2019-2020). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Polaris General 1000?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Polaris General 1000?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734529347620,"sku":"105930","price":132.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/6c42-5b3ff3616b586.jpg?v=1760945096"},{"product_id":"kfi-polaris-rzr-xp-1000-turbo-plow-mount-trailing-arm","title":"KFI Polaris RZR XP 1000 \/ Turbo Plow Mount, Trailing Arm (2014-2023)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Polaris RZR XP 1000 plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Polaris RZR XP 1000 can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Polaris RZR XP 1000, XP 4 1000, XP Turbo and XP 4 Turbo with rear trailing arms, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a Polaris RZR snow plow or RZR snow plow on the trailing-arm XP 1000 and XP Turbo: polaris rzr xp 1000 plow, rzr xp turbo plow and polaris rzr snow plow kit shoppers start with this rzr snow plow mount. 2024-2025 RZR XP 1000 models use KFI 106610.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Polaris RZR XP 1000, XP 4 1000, XP Turbo and XP 4 Turbo with rear trailing arms\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Polaris RZR XP 1000\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Polaris RZR XP 1000\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Polaris RZR XP 1000 Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris RZR XP 1000 owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: frame bracket, plow mount, bolt plate, 3\/8-inch bolts and washers, and 2 M10 x 100mm bolts with nuts\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105870\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRZR XP 1000, rear trailing arm: Base, EPS, Dynamix, LE, Premium, Sport (2014-2023)\u003c\/li\u003e\n\u003cli\u003eRZR XP 1000 Highlifter (2019-2022, requires 2-inch leveling kit)\u003c\/li\u003e\n\u003cli\u003eRZR XP 4 1000, rear trailing arm (2014-2023)\u003c\/li\u003e\n\u003cli\u003eRZR XP 4 1000 Highlifter EPS (2016-2022, requires 2-inch leveling kit)\u003c\/li\u003e\n\u003cli\u003eRZR XP Turbo, rear trailing arm: EPS, LE, Dynamix (2016-2021)\u003c\/li\u003e\n\u003cli\u003eRZR XP 4 Turbo, rear trailing arm: EPS, LE, Dynamix, FOX (2016-2021)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHighlifter models: Requires a KFI 2-inch leveling kit: 106322 for the Pro 2.0 106300 tubes, or 105700 for the older round 105635 tubes. KFI lists this mount for trailing-arm machines only. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Polaris RZR XP 1000?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: RZR XP 1000, rear trailing arm: Base, EPS, Dynamix, LE, Premium, Sport (2014-2023); RZR XP 1000 Highlifter (2019-2022, requires 2-inch leveling kit); RZR XP 4 1000, rear trailing arm (2014-2023); RZR XP 4 1000 Highlifter EPS (2016-2022, requires 2-inch leveling kit); RZR XP Turbo, rear trailing arm: EPS, LE, Dynamix (2016-2021); RZR XP 4 Turbo, rear trailing arm: EPS, LE, Dynamix, FOX (2016-2021). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Polaris RZR XP 1000?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eKFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Polaris RZR XP 1000?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Polaris RZR XP 1000 Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Polaris RZR XP 1000 plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Polaris RZR XP 1000?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: RZR XP 1000, rear trailing arm: Base, EPS, Dynamix, LE, Premium, Sport (2014-2023); RZR XP 1000 Highlifter (2019-2022, requires 2-inch leveling kit); RZR XP 4 1000, rear trailing arm (2014-2023); RZR XP 4 1000 Highlifter EPS (2016-2022, requires 2-inch leveling kit); RZR XP Turbo, rear trailing arm: EPS, LE, Dynamix (2016-2021); RZR XP 4 Turbo, rear trailing arm: EPS, LE, Dynamix, FOX (2016-2021). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Polaris RZR XP 1000?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Polaris RZR XP 1000?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734529380388,"sku":"105870","price":148.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/7017-5b3ff2d22b208.jpg?v=1760945101"},{"product_id":"kfi-can-am-defender-hd5-hd10-utv-plow-mount","title":"KFI Can-Am Defender HD5-HD10 UTV Plow Mount (2016-2027)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Can-Am Defender plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Can-Am Defender can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Can-Am Defender HD5 through HD10, Defender MAX, PRO, 6x6 and XU models listed below, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a can am defender snow plow: snow plow for can am defender and plow for can am defender shoppers start with this can am defender plow mount, which carries the can am defender plow push tube. Snow plow for can am defender hd10 owners, check the chart below. HD11 machines use KFI 106740 or 106750.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Can-Am Defender HD5 through HD10, Defender MAX, PRO, 6x6 and XU models listed below\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Can-Am Defender\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Can-Am Defender\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Can-Am Defender Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCan-Am Defender owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: plow mount plate (105781), 2 nut plates (105783-N) and hardware kit HK-162\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105780\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDefender HD5 \/ HD7 \/ HD8 \/ HD9 \/ HD10, Base, DPS, XT, Mossy Oak (2016-2026)\u003c\/li\u003e\n\u003cli\u003eDefender MAX HD7 \/ HD8 \/ HD9 \/ HD10 (2017-2026)\u003c\/li\u003e\n\u003cli\u003eDefender Limited HD10 and MAX Limited HD10 (2020-2025)\u003c\/li\u003e\n\u003cli\u003eDefender X mr HD10 (2018-2025) and MAX X mr HD10 (2019-2025)\u003c\/li\u003e\n\u003cli\u003eDefender MAX Lone Star HD10 (2018-2025)\u003c\/li\u003e\n\u003cli\u003eDefender PRO \/ XU PRO HD10 and PRO Limited (2020-2027)\u003c\/li\u003e\n\u003cli\u003eDefender \/ XU 6x6 HD10 and 6x6 Limited (2020-2027)\u003c\/li\u003e\n\u003cli\u003eDefender XU and XU MAX HD7 \/ HD9 \/ HD10 (2027)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKFI's chart carries a J note on this mount: lifted machines or machines on larger tires need a 2-inch leveling kit, 106322 for 106300 tubes or 105700 for 105635 tubes. Drilling: Yes. KFI's instructions say drilling is required: use a 13\/32-inch bit to drill through the bumper, using the plow mount bolt holes as the template. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Can-Am Defender?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: Defender HD5 \/ HD7 \/ HD8 \/ HD9 \/ HD10, Base, DPS, XT, Mossy Oak (2016-2026); Defender MAX HD7 \/ HD8 \/ HD9 \/ HD10 (2017-2026); Defender Limited HD10 and MAX Limited HD10 (2020-2025); Defender X mr HD10 (2018-2025) and MAX X mr HD10 (2019-2025); Defender MAX Lone Star HD10 (2018-2025); Defender PRO \/ XU PRO HD10 and PRO Limited (2020-2027); Defender \/ XU 6x6 HD10 and 6x6 Limited (2020-2027); Defender XU and XU MAX HD7 \/ HD9 \/ HD10 (2027). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Can-Am Defender?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eYes. KFI's instructions say drilling is required: use a 13\/32-inch bit to drill through the bumper, using the plow mount bolt holes as the template.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Can-Am Defender?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Can-Am Defender Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Can-Am Defender plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Can-Am Defender?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: Defender HD5 \/ HD7 \/ HD8 \/ HD9 \/ HD10, Base, DPS, XT, Mossy Oak (2016-2026); Defender MAX HD7 \/ HD8 \/ HD9 \/ HD10 (2017-2026); Defender Limited HD10 and MAX Limited HD10 (2020-2025); Defender X mr HD10 (2018-2025) and MAX X mr HD10 (2019-2025); Defender MAX Lone Star HD10 (2018-2025); Defender PRO \/ XU PRO HD10 and PRO Limited (2020-2027); Defender \/ XU 6x6 HD10 and 6x6 Limited (2020-2027); Defender XU and XU MAX HD7 \/ HD9 \/ HD10 (2027). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Can-Am Defender?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. KFI's instructions say drilling is required: use a 13\/32-inch bit to drill through the bumper, using the plow mount bolt holes as the template.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Can-Am Defender?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734529478692,"sku":"105780","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/7fd7-587c84ebee051.jpg?v=1760945110"},{"product_id":"kfi-can-am-maverick-x3-cub-cadet-hisun-utv-plow-mount","title":"KFI Can-Am Maverick X3 \/ Cub Cadet \/ Hisun UTV Plow Mount","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Can-Am Maverick X3 plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Can-Am Maverick X3 can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Can-Am Maverick X3 and X3 MAX plus Bennche Bighorn, Coleman Outfitter, Cub Cadet Challenger, Hisun HS and Massimo MSU models, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a can am x3 snow plow: this can am x3 plow mount takes the push tube for a can am x3 plow, so snow plow for can am maverick x3 shoppers start here. It also covers a cub cadet challenger snow plow, a massimo utv plow and a hisun utv snow plow on the models below.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Can-Am Maverick X3 and X3 MAX plus Bennche Bighorn, Coleman Outfitter, Cub Cadet Challenger, Hisun HS and Massimo MSU models\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Can-Am Maverick X3\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Can-Am Maverick X3\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Can-Am Maverick X3 Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCan-Am Maverick X3 owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: plow mount and M12 \/ M10 bolts, washers and nuts\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105555\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBennche Bighorn 500 \/ 700 (2011-2016)\u003c\/li\u003e\n\u003cli\u003eCan-Am Maverick X3 and X3 MAX (2017-2026)\u003c\/li\u003e\n\u003cli\u003eColeman Outfitter 500 \/ 700 (all)\u003c\/li\u003e\n\u003cli\u003eCub Cadet Challenger 500 \/ 700 \/ 750 Crew (all)\u003c\/li\u003e\n\u003cli\u003eHisun HS500, HS700, HS700 Crew (2015-2016) and HS750 Crew (2016)\u003c\/li\u003e\n\u003cli\u003eMassimo MSU-500, MSU-700 and MSU-700-4 (all)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRequires KFI winch mount 101520 or 101955 and a 2-inch leveling kit. Drilling: Yes, on the Can-Am Maverick X3: KFI's instructions mark two upper holes on the skid plate, then remove it and drill them. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Can-Am Maverick X3?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: Bennche Bighorn 500 \/ 700 (2011-2016); Can-Am Maverick X3 and X3 MAX (2017-2026); Coleman Outfitter 500 \/ 700 (all); Cub Cadet Challenger 500 \/ 700 \/ 750 Crew (all); Hisun HS500, HS700, HS700 Crew (2015-2016) and HS750 Crew (2016); Massimo MSU-500, MSU-700 and MSU-700-4 (all). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Can-Am Maverick X3?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eYes, on the Can-Am Maverick X3: KFI's instructions mark two upper holes on the skid plate, then remove it and drill them.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Can-Am Maverick X3?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Can-Am Maverick X3 Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Can-Am Maverick X3 plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Can-Am Maverick X3?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: Bennche Bighorn 500 \/ 700 (2011-2016); Can-Am Maverick X3 and X3 MAX (2017-2026); Coleman Outfitter 500 \/ 700 (all); Cub Cadet Challenger 500 \/ 700 \/ 750 Crew (all); Hisun HS500, HS700, HS700 Crew (2015-2016) and HS750 Crew (2016); Massimo MSU-500, MSU-700 and MSU-700-4 (all). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Can-Am Maverick X3?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, on the Can-Am Maverick X3: KFI's instructions mark two upper holes on the skid plate, then remove it and drill them.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Can-Am Maverick X3?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734529544228,"sku":"105555","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/db69-572a4fded0e8d.jpg?v=1760945122"},{"product_id":"kfi-polaris-ranger-xp-900-pro-xd-plow-mount-receiver","title":"KFI Polaris Ranger XP 900 \/ PRO XD Plow Mount \u0026 Receiver (2013-2027)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Polaris Ranger XP 900 plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Polaris Ranger XP 900 can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the full-size Polaris Ranger 900-body and Pro-Fit machines, Ranger PRO XD, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a Polaris Ranger snow plow on the XP 900 and PRO XD: a polaris ranger xp 900 plow, polaris ranger pro xd plow or polaris ranger plow starts with this polaris ranger plow mount, also a polaris ranger snow plow mount with a utv snow plow 2 inch receiver built in.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the full-size Polaris Ranger 900-body and Pro-Fit machines, Ranger PRO XD\u003c\/li\u003e\n\u003cli\u003eIntegrated 2-inch lower receiver, so the mount also works as a front receiver hitch when the plow is off\u003c\/li\u003e\n\u003cli\u003ePlate made from 3\/16-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Polaris Ranger XP 900\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Polaris Ranger XP 900\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Polaris Ranger XP 900 Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris Ranger XP 900 owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount with integrated 2-inch lower receiver\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 3\/16-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: plow mount and hardware kit HK-147 (two 7\/16-inch bolts and nuts)\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105475\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRanger 570, 900 body \/ Pro-Fit frame (2015)\u003c\/li\u003e\n\u003cli\u003eRanger Brutus, not HD (2013-2018)\u003c\/li\u003e\n\u003cli\u003eRanger Crew 570, 900 body (2015-2016)\u003c\/li\u003e\n\u003cli\u003eRanger Crew 900 (2014-2019)\u003c\/li\u003e\n\u003cli\u003eRanger Crew Diesel 1000 (2015-2018)\u003c\/li\u003e\n\u003cli\u003eRanger Crew PRO XD gas \/ diesel (2019-2027)\u003c\/li\u003e\n\u003cli\u003eRanger Crew XP 1000 and Northstar (2017-2018)\u003c\/li\u003e\n\u003cli\u003eRanger Diesel 1000 (2015-2018)\u003c\/li\u003e\n\u003cli\u003eRanger Diesel HST \/ Deluxe (2014-2017)\u003c\/li\u003e\n\u003cli\u003eRanger PRO XD gas \/ diesel (2019-2027)\u003c\/li\u003e\n\u003cli\u003eRanger XP 570, 900 body (2016)\u003c\/li\u003e\n\u003cli\u003eRanger XP 900 (2013-2019)\u003c\/li\u003e\n\u003cli\u003eRanger XP 1000 and Northstar (2017)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRequires the stock front bumper. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Polaris Ranger XP 900?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: Ranger 570, 900 body \/ Pro-Fit frame (2015); Ranger Brutus, not HD (2013-2018); Ranger Crew 570, 900 body (2015-2016); Ranger Crew 900 (2014-2019); Ranger Crew Diesel 1000 (2015-2018); Ranger Crew PRO XD gas \/ diesel (2019-2027); Ranger Crew XP 1000 and Northstar (2017-2018); Ranger Diesel 1000 (2015-2018); Ranger Diesel HST \/ Deluxe (2014-2017); Ranger PRO XD gas \/ diesel (2019-2027); Ranger XP 570, 900 body (2016); Ranger XP 900 (2013-2019); Ranger XP 1000 and Northstar (2017). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Polaris Ranger XP 900?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eKFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\u003c\/p\u003e\n\u003ch3\u003eCan I use the receiver without the plow?\u003c\/h3\u003e\n\u003cp\u003eYes. The mount has an integrated 2-inch lower receiver, so it works as a front receiver hitch when the push tube is off.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Polaris Ranger XP 900?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Polaris Ranger XP 900 Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Polaris Ranger XP 900 plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Polaris Ranger XP 900?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: Ranger 570, 900 body \/ Pro-Fit frame (2015); Ranger Brutus, not HD (2013-2018); Ranger Crew 570, 900 body (2015-2016); Ranger Crew 900 (2014-2019); Ranger Crew Diesel 1000 (2015-2018); Ranger Crew PRO XD gas \/ diesel (2019-2027); Ranger Crew XP 1000 and Northstar (2017-2018); Ranger Diesel 1000 (2015-2018); Ranger Diesel HST \/ Deluxe (2014-2017); Ranger PRO XD gas \/ diesel (2019-2027); Ranger XP 570, 900 body (2016); Ranger XP 900 (2013-2019); Ranger XP 1000 and Northstar (2017). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Polaris Ranger XP 900?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\"}}, {\"@type\": \"Question\", \"name\": \"Can I use the receiver without the plow?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The mount has an integrated 2-inch lower receiver, so it works as a front receiver hitch when the push tube is off.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Polaris Ranger XP 900?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734529740836,"sku":"105475","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/26d2-587c84d8b25e9.jpg?v=1760945131"},{"product_id":"kfi-polaris-rzr-570-800-900-utv-plow-mount","title":"KFI Polaris RZR 570\/800\/900 UTV Plow Mount (2008-2022)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Polaris RZR 570\/800\/900 plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Polaris RZR 570\/800\/900 can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Polaris RZR 570, 800 and 900 (2008-2022 models listed below), and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a Polaris RZR snow plow or RZR snow plow on the 570, 800 and 900: polaris rzr 570 plow, polaris rzr 800 plow and rzr 900 snow plow shoppers start with this polaris rzr plow mount.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Polaris RZR 570, 800 and 900 (2008-2022 models listed below)\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Polaris RZR 570\/800\/900\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Polaris RZR 570\/800\/900\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Polaris RZR 570\/800\/900 Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris RZR 570\/800\/900 owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: plow mount (105411), 2 nut plates (106428, RZR 570 and 800 only), a 12-inch soft strap and hardware kit HK-137\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105410\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRZR 570 \/ S \/ Trail (2012-2022)\u003c\/li\u003e\n\u003cli\u003eRZR 800 \/ S (2008-2014)\u003c\/li\u003e\n\u003cli\u003eRZR 4 800 (2010-2014)\u003c\/li\u003e\n\u003cli\u003eRZR 900 and RZR 4 900 (2014)\u003c\/li\u003e\n\u003cli\u003eRZR XP 900 (2011-2013)\u003c\/li\u003e\n\u003cli\u003eRZR XP 4 900 (2012-2013)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKFI recommends adding the 105270 plow pulley if you run a steel cable winch, or the 106745 Quick Plow Pulley for synthetic rope. RZR 570 and 800: requires KFI winch mount 100660 or the Polaris OEM winch mount. RZR 900 and XP 900 models: requires KFI winch mount 100765. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Polaris RZR 570\/800\/900?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: RZR 570 \/ S \/ Trail (2012-2022); RZR 800 \/ S (2008-2014); RZR 4 800 (2010-2014); RZR 900 and RZR 4 900 (2014); RZR XP 900 (2011-2013); RZR XP 4 900 (2012-2013). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Polaris RZR 570\/800\/900?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eKFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Polaris RZR 570\/800\/900?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Polaris RZR 570\/800\/900 Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Polaris RZR 570\/800\/900 plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Polaris RZR 570\/800\/900?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: RZR 570 \/ S \/ Trail (2012-2022); RZR 800 \/ S (2008-2014); RZR 4 800 (2010-2014); RZR 900 and RZR 4 900 (2014); RZR XP 900 (2011-2013); RZR XP 4 900 (2012-2013). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Polaris RZR 570\/800\/900?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Polaris RZR 570\/800\/900?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734529806372,"sku":"105410","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/a446-587c84d54e40d.jpg?v=1760945142"},{"product_id":"kfi-polaris-ranger-mid-size-570-plow-mount-receiver","title":"KFI Polaris Ranger Mid-Size\/570 Plow Mount \u0026 Receiver (2009-2025)","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Polaris Ranger 570 plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Polaris Ranger 570 can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Polaris mid-size Rangers (400, 500, 570, 800, Crew, ETX, EV) and full-size Rangers with the 800 body style and round tube frame, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. It is the base for a Polaris Ranger 570 snow plow or any polaris ranger snow plow on the mid-size and 800-body machines listed below, so plow for polaris ranger 570 shoppers start here. The built-in receiver makes it a utv snow plow 2 inch receiver setup, and the polaris ranger 570 plow pins on with the push tube.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Polaris mid-size Rangers (400, 500, 570, 800, Crew, ETX, EV) and full-size Rangers with the 800 body style and round tube frame\u003c\/li\u003e\n\u003cli\u003eIntegrated 2-inch lower receiver, so the mount also works as a front receiver hitch when the plow is off\u003c\/li\u003e\n\u003cli\u003ePlate made from 3\/16-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Polaris Ranger 570\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Polaris Ranger 570\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Polaris Ranger 570 Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris Ranger 570 owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount with integrated 2-inch lower receiver\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 3\/16-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: plow mount, back plate and hardware kit HK-051\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105255\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRanger 400 mid-size (2010-2014)\u003c\/li\u003e\n\u003cli\u003eRanger 500 mid-size (2011-2013, 2017-2022)\u003c\/li\u003e\n\u003cli\u003eRanger 570 mid-size (2014-2021)\u003c\/li\u003e\n\u003cli\u003eRanger 800 mid-size (2013-2014)\u003c\/li\u003e\n\u003cli\u003eRanger Crew 500 mid-size (2011-2013)\u003c\/li\u003e\n\u003cli\u003eRanger Crew 570 mid-size (2014-2021)\u003c\/li\u003e\n\u003cli\u003eRanger ETX mid-size (2015-2016)\u003c\/li\u003e\n\u003cli\u003eRanger EV mid-size (2010-2022)\u003c\/li\u003e\n\u003cli\u003eRanger 500 full-size (2009-2010)\u003c\/li\u003e\n\u003cli\u003eRanger 570, 800 body style \/ round tube frame (2016-2025)\u003c\/li\u003e\n\u003cli\u003eRanger 700 and XP 700 (2009)\u003c\/li\u003e\n\u003cli\u003eRanger 800 (2010-2014)\u003c\/li\u003e\n\u003cli\u003eRanger 800 6x6 (2010-2016)\u003c\/li\u003e\n\u003cli\u003eRanger Crew 570, 800 body style (2017-2025)\u003c\/li\u003e\n\u003cli\u003eRanger Crew 800 (2010-2014)\u003c\/li\u003e\n\u003cli\u003eRanger Diesel 900 (2011-2014) and Crew Diesel (2012-2014)\u003c\/li\u003e\n\u003cli\u003eRanger XP 800 (2012)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRequires the stock front bumper. KFI also lists it for the discontinued 106180 V-Plow push tube kits. If your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Polaris Ranger 570?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: Ranger 400 mid-size (2010-2014); Ranger 500 mid-size (2011-2013, 2017-2022); Ranger 570 mid-size (2014-2021); Ranger 800 mid-size (2013-2014); Ranger Crew 500 mid-size (2011-2013); Ranger Crew 570 mid-size (2014-2021); Ranger ETX mid-size (2015-2016); Ranger EV mid-size (2010-2022); Ranger 500 full-size (2009-2010); Ranger 570, 800 body style \/ round tube frame (2016-2025); Ranger 700 and XP 700 (2009); Ranger 800 (2010-2014); Ranger 800 6x6 (2010-2016); Ranger Crew 570, 800 body style (2017-2025); Ranger Crew 800 (2010-2014); Ranger Diesel 900 (2011-2014) and Crew Diesel (2012-2014); Ranger XP 800 (2012). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Polaris Ranger 570?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eKFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\u003c\/p\u003e\n\u003ch3\u003eCan I use the receiver without the plow?\u003c\/h3\u003e\n\u003cp\u003eYes. The mount has an integrated 2-inch lower receiver, so it works as a front receiver hitch when the push tube is off.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Polaris Ranger 570?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Polaris Ranger 570 Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Polaris Ranger 570 plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Polaris Ranger 570?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: Ranger 400 mid-size (2010-2014); Ranger 500 mid-size (2011-2013, 2017-2022); Ranger 570 mid-size (2014-2021); Ranger 800 mid-size (2013-2014); Ranger Crew 500 mid-size (2011-2013); Ranger Crew 570 mid-size (2014-2021); Ranger ETX mid-size (2015-2016); Ranger EV mid-size (2010-2022); Ranger 500 full-size (2009-2010); Ranger 570, 800 body style \/ round tube frame (2016-2025); Ranger 700 and XP 700 (2009); Ranger 800 (2010-2014); Ranger 800 6x6 (2010-2016); Ranger Crew 570, 800 body style (2017-2025); Ranger Crew 800 (2010-2014); Ranger Diesel 900 (2011-2014) and Crew Diesel (2012-2014); Ranger XP 800 (2012). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Polaris Ranger 570?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\"}}, {\"@type\": \"Question\", \"name\": \"Can I use the receiver without the plow?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The mount has an integrated 2-inch lower receiver, so it works as a front receiver hitch when the push tube is off.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Polaris Ranger 570?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734529904676,"sku":"105255","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/169f-587c84cbdfaf2.jpg?v=1760945152"},{"product_id":"kfi-72-inch-pro-s-steel-utv-straight-plow-blade","title":"KFI 72\" Pro-S Steel UTV Straight Plow Blade","description":"\u003cp\u003e\u003cstrong\u003eThe KFI 72-inch Pro-S is a straight steel UTV plow blade built for KFI UTV push tubes.\u003c\/strong\u003e It ships with a reversible 2-piece wear bar pre-installed, plus a rubber flap, edge trim and a skid kit.\u003c\/p\u003e\n\u003cp\u003eA steel blade takes impacts from gravel and curbs well. Pair it with a KFI push tube and the mount for your machine.\u003c\/p\u003e\n\u003cp\u003eThis UTV plow blade is KFI's steel option: a 72-inch UTV snow plow blade (a 72 inch UTV plow blade, or UTV snow plow 72 in search terms) whose reversible wear bar is the UTV snow plow cutting edge. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e72-inch straight steel blade for UTVs\u003c\/li\u003e\n\u003cli\u003eReversible 2-piece wear bar, pre-installed\u003c\/li\u003e\n\u003cli\u003eRubber flap, edge trim and hardware HK-102 included\u003c\/li\u003e\n\u003cli\u003ePlow skid kit 105170-R included\u003c\/li\u003e\n\u003cli\u003e2-year KFI warranty (90 days commercial or rental use)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: A Tough Steel Blade for Your UTV\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePlowing gravel driveways and rough lots\u003c\/li\u003e\n\u003cli\u003eWorn cutting edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: UTV Owners Who Want a 72\" Steel Blade\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUTVs where a 72-inch blade clears the tires when angled\u003c\/li\u003e\n\u003cli\u003eOwners plowing gravel and uneven ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV straight plow blade\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eWidth: 72 inches\u003c\/li\u003e\n\u003cli\u003eConstruction: steel (Pro-S series)\u003c\/li\u003e\n\u003cli\u003eWear bar: reversible 2-piece, pre-installed\u003c\/li\u003e\n\u003cli\u003eIncluded: rubber flap, edge trim, HK-102 hardware, skid kit 105170-R\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 years (KFI)\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105072\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI UTV push tubes 106300 and 105635\u003c\/li\u003e\n\u003cli\u003eKFI vehicle-specific UTV plow mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe push tube and vehicle mount are sold separately. Choose a width that clears your tires at full angle. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eThe blade with a pre-installed reversible wear bar, a rubber flap with edge trim and hardware, and a skid kit.\u003c\/p\u003e\n\u003ch3\u003eSteel or poly?\u003c\/h3\u003e\n\u003cp\u003eSteel takes impacts well; Pro-Poly sheds wet snow more easily. KFI makes both.\u003c\/p\u003e\n\u003ch3\u003eWhat do I need to mount it?\u003c\/h3\u003e\n\u003cp\u003eA KFI UTV push tube and the KFI plow mount for your machine, plus a winch.\u003c\/p\u003e\n\u003ch3\u003eWhich accessories fit?\u003c\/h3\u003e\n\u003cp\u003ePro-S side shields 105540 \/ 106475, Pro-S markers 105640 \/ 106495, curb guards 106155 and skids 105170-R.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 105072, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your KFI UTV Plow Around the 72\" Pro-S Blade\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI 72-inch Pro-S steel blade, then add the push tube and the mount for your UTV. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The blade with a pre-installed reversible wear bar, a rubber flap with edge trim and hardware, and a skid kit.\"}}, {\"@type\": \"Question\", \"name\": \"Steel or poly?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Steel takes impacts well; Pro-Poly sheds wet snow more easily. KFI makes both.\"}}, {\"@type\": \"Question\", \"name\": \"What do I need to mount it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A KFI UTV push tube and the KFI plow mount for your machine, plus a winch.\"}}, {\"@type\": \"Question\", \"name\": \"Which accessories fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Pro-S side shields 105540 \/ 106475, Pro-S markers 105640 \/ 106495, curb guards 106155 and skids 105170-R.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 105072, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734529937444,"sku":"105072","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/0408-6866cb1677ee6.png?v=1760945157"},{"product_id":"kfi-66-inch-pro-s-steel-utv-straight-plow-blade","title":"KFI 66\" Pro-S Steel UTV Straight Plow Blade","description":"\u003cp\u003e\u003cstrong\u003eThe KFI 66-inch Pro-S is a straight steel UTV plow blade built for KFI UTV push tubes.\u003c\/strong\u003e It ships with a reversible 2-piece wear bar pre-installed, plus a rubber flap, edge trim and a skid kit.\u003c\/p\u003e\n\u003cp\u003eA steel blade takes impacts from gravel and curbs well. Pair it with a KFI push tube and the mount for your machine.\u003c\/p\u003e\n\u003cp\u003eThis UTV plow blade is KFI's steel option: a 66-inch UTV snow plow blade (a 66 inch plow blade) whose reversible wear bar is the UTV snow plow cutting edge. KFI plow parts and other UTV snow plow accessories and UTV snow plow parts like this keep a KFI snow plow or KFI UTV plow working on UTV snow plows of every size; they are sold separately from the push tube, blade and mount, so you add only the UTV plow accessories your setup needs.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e66-inch straight steel blade for UTVs\u003c\/li\u003e\n\u003cli\u003eReversible 2-piece wear bar, pre-installed\u003c\/li\u003e\n\u003cli\u003eRubber flap, edge trim and hardware HK-102 included\u003c\/li\u003e\n\u003cli\u003ePlow skid kit 105170-R included\u003c\/li\u003e\n\u003cli\u003e2-year KFI warranty (90 days commercial or rental use)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: A Tough Steel Blade for Your UTV\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePlowing gravel driveways and rough lots\u003c\/li\u003e\n\u003cli\u003eWorn cutting edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: UTV Owners Who Want a 66\" Steel Blade\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUTVs where a 66-inch blade clears the tires when angled\u003c\/li\u003e\n\u003cli\u003eOwners plowing gravel and uneven ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV straight plow blade\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003eWidth: 66 inches\u003c\/li\u003e\n\u003cli\u003eConstruction: steel (Pro-S series)\u003c\/li\u003e\n\u003cli\u003eWear bar: reversible 2-piece, pre-installed\u003c\/li\u003e\n\u003cli\u003eIncluded: rubber flap, edge trim, HK-102 hardware, skid kit 105170-R\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 years (KFI)\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 105066\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eWorks with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKFI UTV push tubes 106300 and 105635\u003c\/li\u003e\n\u003cli\u003eKFI vehicle-specific UTV plow mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe push tube and vehicle mount are sold separately. Choose a width that clears your tires at full angle. Fitment is not guaranteed on unlisted setups.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eThe blade with a pre-installed reversible wear bar, a rubber flap with edge trim and hardware, and a skid kit.\u003c\/p\u003e\n\u003ch3\u003eSteel or poly?\u003c\/h3\u003e\n\u003cp\u003eSteel takes impacts well; Pro-Poly sheds wet snow more easily. KFI makes both.\u003c\/p\u003e\n\u003ch3\u003eWhat do I need to mount it?\u003c\/h3\u003e\n\u003cp\u003eA KFI UTV push tube and the KFI plow mount for your machine, plus a winch.\u003c\/p\u003e\n\u003ch3\u003eWhich accessories fit?\u003c\/h3\u003e\n\u003cp\u003ePro-S side shields 105540 \/ 106475, Pro-S markers 105640 \/ 106495, curb guards 106155 and skids 105170-R.\u003c\/p\u003e\n\u003ch3\u003eIs this a genuine KFI part?\u003c\/h3\u003e\n\u003cp\u003eYes. It is KFI manufacturer part number 105066, sold new.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your KFI UTV Plow Around the 66\" Pro-S Blade\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI 66-inch Pro-S steel blade, then add the push tube and the mount for your UTV. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What is included?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The blade with a pre-installed reversible wear bar, a rubber flap with edge trim and hardware, and a skid kit.\"}}, {\"@type\": \"Question\", \"name\": \"Steel or poly?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Steel takes impacts well; Pro-Poly sheds wet snow more easily. KFI makes both.\"}}, {\"@type\": \"Question\", \"name\": \"What do I need to mount it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A KFI UTV push tube and the KFI plow mount for your machine, plus a winch.\"}}, {\"@type\": \"Question\", \"name\": \"Which accessories fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Pro-S side shields 105540 \/ 106475, Pro-S markers 105640 \/ 106495, curb guards 106155 and skids 105170-R.\"}}, {\"@type\": \"Question\", \"name\": \"Is this a genuine KFI part?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It is KFI manufacturer part number 105066, sold new.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":42734529970212,"sku":"105066","price":460.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/e39e-667ebffce20dc.png?v=1760945162"},{"product_id":"plow-push-tube-atv-1","title":"ATV Plow Push Tube","description":"\u003cp data-start=\"374\" data-end=\"555\"\u003eThis \u003cstrong data-start=\"379\" data-end=\"406\"\u003eATV Snow Plow Push Tube\u003c\/strong\u003e is designed to fit a wide range of popular ATV models used for plowing applications. Please verify your exact year, make, and model before ordering.\u003c\/p\u003e\n\u003chr data-start=\"557\" data-end=\"560\"\u003e\n\u003ch3 data-start=\"562\" data-end=\"583\"\u003e🐾 \u003cstrong data-start=\"569\" data-end=\"583\"\u003eArctic Cat\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"586\" data-end=\"613\"\u003e400 \/ 400 4x4 (2002–2007)\u003c\/li\u003e\n\u003cli data-start=\"616\" data-end=\"652\"\u003e500 \/ 500 4x4 \/ 500 XT (2002–2017)\u003c\/li\u003e\n\u003cli data-start=\"655\" data-end=\"682\"\u003e550i GT \/ LTD (2012–2013)\u003c\/li\u003e\n\u003cli data-start=\"685\" data-end=\"731\"\u003e700 \/ 700 Diesel \/ 700 XT \/ 700i (2007–2014)\u003c\/li\u003e\n\u003cli data-start=\"734\" data-end=\"771\"\u003eAlterra 500 \/ 550 \/ 700 (2016–2022)\u003c\/li\u003e\n\u003cli data-start=\"774\" data-end=\"799\"\u003eMudPro 650 \/ 700 (2011)\u003c\/li\u003e\n\u003cli data-start=\"802\" data-end=\"822\"\u003eTRV 550i GT (2012)\u003c\/li\u003e\n\u003cli data-start=\"825\" data-end=\"867\"\u003eWildcat 1000 \/ Sport \/ Trail (2012–2017)\u003c\/li\u003e\n\u003cli data-start=\"870\" data-end=\"895\"\u003eXR 500 \/ 550 \/ 700 (2015)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"897\" data-end=\"900\"\u003e\n\u003ch3 data-start=\"902\" data-end=\"919\"\u003e🔶 \u003cstrong data-start=\"909\" data-end=\"919\"\u003eCan-Am\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"922\" data-end=\"986\"\u003eOutlander 400 \/ 450 \/ 500 \/ 570 \/ 650 \/ 800R \/ 850 (2011–2022)\u003c\/li\u003e\n\u003cli data-start=\"989\" data-end=\"1035\"\u003eOutlander MAX \u0026amp; L \/ L MAX models (2011–2022)\u003c\/li\u003e\n\u003cli data-start=\"1038\" data-end=\"1087\"\u003eRenegade 500 \/ 570 \/ 800 \/ 850 \/ 1000 (2007–2022)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1089\" data-end=\"1092\"\u003e\n\u003ch3 data-start=\"1094\" data-end=\"1111\"\u003e🔵 \u003cstrong data-start=\"1101\" data-end=\"1111\"\u003eCFMOTO\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1114\" data-end=\"1165\"\u003eCFORCE 400 \/ 500 \/ 600 \/ 800 \/ 800 XC (2012–2021)\u003c\/li\u003e\n\u003cli data-start=\"1168\" data-end=\"1195\"\u003eX8 \/ Terralander 800 (2012)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1197\" data-end=\"1200\"\u003e\n\u003ch3 data-start=\"1202\" data-end=\"1218\"\u003e🔴 \u003cstrong data-start=\"1209\" data-end=\"1218\"\u003eHonda\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1221\" data-end=\"1258\"\u003eRancher 350 \/ 400 \/ 420 (1995–2022)\u003c\/li\u003e\n\u003cli data-start=\"1261\" data-end=\"1304\"\u003eForeman 400 \/ 450 \/ 500 \/ 520 (1998–2022)\u003c\/li\u003e\n\u003cli data-start=\"1307\" data-end=\"1338\"\u003eRubicon 500 \/ 520 (2001–2022)\u003c\/li\u003e\n\u003cli data-start=\"1341\" data-end=\"1369\"\u003eRincon 650 \/ 680 (2003–2022)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1371\" data-end=\"1374\"\u003e\n\u003ch3 data-start=\"1376\" data-end=\"1397\"\u003e🟢 \u003cstrong data-start=\"1383\" data-end=\"1397\"\u003eJohn Deere\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1400\" data-end=\"1437\"\u003eBuck 500 \/ Trail Buck 500 (2004–2005)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1439\" data-end=\"1442\"\u003e\n\u003ch3 data-start=\"1444\" data-end=\"1462\"\u003e⚫ \u003cstrong data-start=\"1450\" data-end=\"1462\"\u003eKawasaki\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1465\" data-end=\"1490\"\u003ePrairie 360 (2003–2012)\u003c\/li\u003e\n\u003cli data-start=\"1493\" data-end=\"1526\"\u003eBrute Force 650 \/ 750 (2005–2022)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1528\" data-end=\"1531\"\u003e\n\u003ch3 data-start=\"1533\" data-end=\"1551\"\u003e🔷 \u003cstrong data-start=\"1540\" data-end=\"1551\"\u003ePolaris\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1554\" data-end=\"1587\"\u003eACE 500 \/ 570 \/ 900 (2016–2019)\u003c\/li\u003e\n\u003cli data-start=\"1590\" data-end=\"1617\"\u003eATP 330 \/ 500 (2004–2005)\u003c\/li\u003e\n\u003cli data-start=\"1620\" data-end=\"1650\"\u003eMagnum 330 \/ 425 (1995–2006)\u003c\/li\u003e\n\u003cli data-start=\"1653\" data-end=\"1704\"\u003eRZR 570 \/ 800 \/ 900 \/ XP 1000 \/ Turbo (2012–2018)\u003c\/li\u003e\n\u003cli data-start=\"1707\" data-end=\"1734\"\u003eScrambler 850 (2015–2022)\u003c\/li\u003e\n\u003cli data-start=\"1737\" data-end=\"1806\"\u003eSportsman 335 \/ 400 \/ 450 \/ 550 \/ 570 \/ 600 \/ 700 \/ 850 (1999–2022)\u003c\/li\u003e\n\u003cli data-start=\"1809\" data-end=\"1842\"\u003eTrail Boss 250 \/ 350L (1989–1999)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1844\" data-end=\"1847\"\u003e\n\u003ch3 data-start=\"1849\" data-end=\"1866\"\u003e🟡 \u003cstrong data-start=\"1856\" data-end=\"1866\"\u003eSuzuki\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1869\" data-end=\"1913\"\u003eKingQuad 400 \/ 450 \/ 700 \/ 750 (2005–2022)\u003c\/li\u003e\n\u003cli data-start=\"1916\" data-end=\"1956\"\u003eQuadRunner 250 \/ 300 \/ 500 (1997–2002)\u003c\/li\u003e\n\u003cli data-start=\"1959\" data-end=\"1982\"\u003eEiger 400 (2002–2007)\u003c\/li\u003e\n\u003cli data-start=\"1985\" data-end=\"2009\"\u003eVinson 500 (2003–2007)\u003c\/li\u003e\n\u003cli data-start=\"2012\" data-end=\"2038\"\u003eTwin Peaks 700 (2004–2005)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"2040\" data-end=\"2043\"\u003e\n\u003ch3 data-start=\"2045\" data-end=\"2062\"\u003e🔵 \u003cstrong data-start=\"2052\" data-end=\"2062\"\u003eYamaha\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"2065\" data-end=\"2089\"\u003eRaptor 350 (2005–2006)\u003c\/li\u003e\n\u003cli data-start=\"2092\" data-end=\"2122\"\u003eKodiak 400 \/ 700 (2003–2022)\u003c\/li\u003e\n\u003cli data-start=\"2125\" data-end=\"2178\"\u003eGrizzly 400 \/ 450 \/ 550 \/ 600 \/ 660 \/ 700 (1999–2022)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"2180\" data-end=\"2183\"\u003e\n\u003ch2 data-start=\"2185\" data-end=\"2214\"\u003e⚠️ Important Fitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"2217\" data-end=\"2255\"\u003eDesigned for \u003cstrong data-start=\"2230\" data-end=\"2255\"\u003eATV plow applications\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2258\" data-end=\"2288\"\u003e\u003cstrong data-start=\"2258\" data-end=\"2288\"\u003ePlow blade sold separately\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-start=\"2291\" data-end=\"2359\"\u003eVerify mounting style and subframe compatibility before installation\u003c\/li\u003e\n\u003cli data-start=\"2362\" data-end=\"2409\"\u003eProfessional installation recommended if unsure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":43292806250532,"sku":"105000","price":265.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/DE3D689D-782C-45DA-A84C-041BB720DA45.jpg?v=1770326105"},{"product_id":"kfi-segway-fugleman-ut6-utv-plow-mount","title":"KFI Segway Fugleman UT6 UTV Plow Mount","description":"\u003cp\u003e\u003cstrong\u003eThe KFI Segway Fugleman UT6 plow mount is the vehicle-side base for a KFI UTV snow plow, built so your Segway Fugleman UT6 can push snow with a KFI push tube and blade.\u003c\/strong\u003e It is listed for the Segway Fugleman UT6 P, M and S, and it is made in the USA from grade 50 steel.\u003c\/p\u003e\n\u003cp\u003eThis is a KFI plow mount only. Pair it with a KFI push tube and blade to build a complete KFI UTV plow, then pull the hitch pins to take the plow off when spring comes.\u003c\/p\u003e\n\u003cp\u003eEvery KFI snow plow on a UTV is built from three parts: the vehicle-specific KFI UTV plow mount, a KFI push tube and a blade. This snow plow mount is the first piece; add the tube and blade and you have a complete UTV plow kit or UTV snow plow kit. KFI UTV snow plows share one push tube and blade line, so each mount is the only vehicle-specific UTV plow part. If you are shopping for a Segway Fugleman plow or a Segway UT6 plow, this is the mount KFI lists for the UT6. The UT10 uses KFI 106480.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific KFI plow mount for the Segway Fugleman UT6 P, M and S\u003c\/li\u003e\n\u003cli\u003ePlate made from 1\/4-inch grade 50 steel with 1\/4-inch grade 50 steel plow mounting tabs\u003c\/li\u003e\n\u003cli\u003eFront lower plow mount system: the push tube pins on and off with two standard 5\/8-inch hitch pins (the pins come with the push tubes)\u003c\/li\u003e\n\u003cli\u003eWorks with the KFI Pro 2.0 UTV push tube 106300 (square tube), the discontinued round-style KFI UTV push tube 105635, or the KFI Pro-V plow system\u003c\/li\u003e\n\u003cli\u003eMetal bead blasted before powder coating, then powder coated black\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and complete installation instructions included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Mounting a Snow Plow on the Segway Fugleman UT6\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo factory way to hang a snow plow on the Segway Fugleman UT6\u003c\/li\u003e\n\u003cli\u003eShoveling driveways, lanes and yards by hand after every storm\u003c\/li\u003e\n\u003cli\u003ePlow setups that bolt to the wrong points and flex under load\u003c\/li\u003e\n\u003cli\u003eA plow that has to come off quickly when the snow is gone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Segway Fugleman UT6 Owners Who Plow Snow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSegway Fugleman UT6 owners clearing their own driveways, farm lanes, shop lots and trails\u003c\/li\u003e\n\u003cli\u003eOwners building a KFI UTV snow plow kit one piece at a time: mount, push tube, blade\u003c\/li\u003e\n\u003cli\u003eOwners replacing a lost or damaged KFI plow mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: UTV front lower plow mount\u003c\/li\u003e\n\u003cli\u003eBrand: KFI\u003c\/li\u003e\n\u003cli\u003ePlate: 1\/4-inch grade 50 steel; plow mounting tabs: 1\/4-inch grade 50 steel\u003c\/li\u003e\n\u003cli\u003eConnection: two 5\/8-inch hitch pins (supplied with the push tubes)\u003c\/li\u003e\n\u003cli\u003eCompatible tube systems: KFI Pro 2.0 106300, KFI round 105635 (discontinued), KFI Pro-V\u003c\/li\u003e\n\u003cli\u003eFinish: bead blasted, black powder coat\u003c\/li\u003e\n\u003cli\u003eIncluded: plow mount and mounting hardware\u003c\/li\u003e\n\u003cli\u003eCountry of origin: USA\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: 106735\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eKFI lists this mount for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSegway Fugleman UT6 P \/ M \/ S (all years; Turn 14 lists 2026+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your machine has a lift kit, larger tires, forward A-arms or tracks, KFI says you may also need a KFI push tube leveling kit. This is the vehicle-side mount only: the push tube, blade and a winch to lift the plow are sold separately. Fitment comes from the KFI application chart for this part and is not guaranteed on unlisted models or years.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this plow mount fit my Segway Fugleman UT6?\u003c\/h3\u003e\n\u003cp\u003eKFI lists it for: Segway Fugleman UT6 P \/ M \/ S (all years; Turn 14 lists 2026+). Check the notes under Fitment and confirm your exact model and year before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to plow snow with my Segway Fugleman UT6?\u003c\/h3\u003e\n\u003cp\u003eThis is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\u003c\/p\u003e\n\u003ch3\u003eDoes installation require drilling?\u003c\/h3\u003e\n\u003cp\u003eKFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\u003c\/p\u003e\n\u003ch3\u003eCan I leave the mount on all year?\u003c\/h3\u003e\n\u003cp\u003eYes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\u003c\/p\u003e\n\u003ch3\u003eWhich KFI blade should I run on my Segway Fugleman UT6?\u003c\/h3\u003e\n\u003cp\u003eKFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy KFI\u003c\/h2\u003e\n\u003cp\u003eKFI (Kappers Fabricating) designs and builds winch mounts, plow mounts and complete UTV plow systems in the USA, sells replacement parts for its plows, and publishes installation instructions for its parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eBuild Your Segway Fugleman UT6 Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eOrder the KFI Segway Fugleman UT6 plow mount, then add the push tube, blade and plow pulley from the related products below. Confirm your model and year against the fitment list first. Order from Dunes 2 Dezert SXS.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this plow mount fit my Segway Fugleman UT6?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI lists it for: Segway Fugleman UT6 P \/ M \/ S (all years; Turn 14 lists 2026+). Check the notes under Fitment and confirm your exact model and year before you order.\"}}, {\"@type\": \"Question\", \"name\": \"What else do I need to plow snow with my Segway Fugleman UT6?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This is the mount only. Add a KFI UTV push tube (Pro 2.0 106300, the older round 105635, or the Pro-V tube kit), a KFI blade, and a winch to raise and lower the plow. A plow pulley keeps the winch line from rubbing.\"}}, {\"@type\": \"Question\", \"name\": \"Does installation require drilling?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI's instructions bolt the mount to the machine with the included hardware. Read the full instructions on this page before you start.\"}}, {\"@type\": \"Question\", \"name\": \"Can I leave the mount on all year?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It sits under the front of the machine, and the push tube pins on and off with hitch pins when you need the plow.\"}}, {\"@type\": \"Question\", \"name\": \"Which KFI blade should I run on my Segway Fugleman UT6?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"KFI sells Pro-S steel and Pro-Poly straight blades in 60, 66 and 72 inches, plus the Pro-V plow. Pick a width that clears your tires; the mount does not change with blade size.\"}}]}\u003c\/script\u003e","brand":"KFI","offers":[{"title":"Default Title","offer_id":43586685992996,"sku":"106735","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/106735-01.webp?v=1792562214"},{"product_id":"2024-polaris-xpedition-plow-pro-snow-plow-mount-superatv","title":"SuperATV Polaris Xpedition Snow Plow Mount (2024+)","description":"\u003cp\u003e\u003cstrong\u003eThis Polaris Xpedition Plow Pro Snow Plow Mount solves the hassle of getting your machine winter-ready by bolting to your factory mounting points with quick-connect latches so you can hook up a Plow Pro blade in minutes.\u003c\/strong\u003e Built from 3\/16-inch hand-welded steel, it stands up to the strain of pushing snow without backing down. Its low-profile design means you can leave it on your Xpedition all season without interfering with your ride, and installation requires no drilling.\u003c\/p\u003e\u003cp\u003eNote: this mount is compatible with Super ATV Plow Pro snow plow blades only.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMade of 3\/16-inch hand-welded steel plating\u003c\/li\u003e\n\u003cli\u003eQuick-connect latches attach and remove your plow in minutes\u003c\/li\u003e\n\u003cli\u003eLow-profile design can be left on year-round\u003c\/li\u003e\n\u003cli\u003eBolts to OEM mounting points for a secure, reliable fit\u003c\/li\u003e\n\u003cli\u003eEasy installation with no drilling required\u003c\/li\u003e\n\u003cli\u003eCompatible with Super ATV Plow Pro snow plow blades\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eBuilt To Solve: Winter-Ready Plowing On The Polaris Xpedition\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSlow, awkward blade hookup when snow is already falling\u003c\/li\u003e\n\u003cli\u003eWeak or flimsy mounts that flex under plowing loads\u003c\/li\u003e\n\u003cli\u003eDrilling and permanent modifications to attach a plow\u003c\/li\u003e\n\u003cli\u003eBulky mounts that drag or interfere during normal riding\u003c\/li\u003e\n\u003cli\u003eMounts that must be removed and reinstalled between storms\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eBest For: Xpedition Owners Who Plow Snow And Work Through Winter\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePolaris Xpedition ADV and XP owners clearing driveways and trails\u003c\/li\u003e\n\u003cli\u003eProperty and utility owners who plow through the season\u003c\/li\u003e\n\u003cli\u003eRiders who want a leave-on mount with fast blade changeovers\u003c\/li\u003e\n\u003cli\u003eOwners running or buying a Super ATV Plow Pro blade\u003c\/li\u003e\n\u003cli\u003eBuyers who want a no-drill install on factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 3\/16-inch hand-welded steel plating\u003c\/li\u003e\n\u003cli\u003eAttachment: Quick-connect latches\u003c\/li\u003e\n\u003cli\u003eMounting: OEM factory mounting points, no drilling required\u003c\/li\u003e\n\u003cli\u003eProfile: Low-profile, can be left on year-round\u003c\/li\u003e\n\u003cli\u003eCompatibility: Super ATV Plow Pro snow plow blades only\u003c\/li\u003e\n\u003cli\u003eWarranty: 3-year warranty against manufacturing defects\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: SPM-P-XPD-02\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003eEngineered for the 2024 and newer Polaris Xpedition platform, including ADV NorthStar, ADV Premium, ADV Ultimate, ADV 5 NorthStar, ADV 5 Premium, ADV 5 Ultimate, XP NorthStar, XP Premium, XP Ultimate, XP 5 NorthStar, XP 5 Premium, and XP 5 Ultimate trims. This mount is compatible with Super ATV Plow Pro snow plow blades only. Confirm your exact year and model before ordering. Fitment is not guaranteed on applications not listed here.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eDoes this mount fit my Polaris Xpedition?\u003c\/h3\u003e\u003cp\u003eIt is designed for 2024+ Polaris Xpedition ADV and XP trims, including the 5-seat versions. Verify your year and trim against the fitment list before ordering.\u003c\/p\u003e\u003ch3\u003eWhat plow blades work with this mount?\u003c\/h3\u003e\u003cp\u003eThis mount is compatible with Super ATV Plow Pro snow plow blades only. It is not designed to work with other plow blade systems.\u003c\/p\u003e\u003ch3\u003eDo I have to drill to install it?\u003c\/h3\u003e\u003cp\u003eNo. The mount bolts to your factory OEM mounting points with no drilling required, making installation straightforward.\u003c\/p\u003e\u003ch3\u003eCan I leave the mount on all winter?\u003c\/h3\u003e\u003cp\u003eYes. Its low-profile design lets you leave it on your Xpedition year-round without interfering with normal riding.\u003c\/p\u003e\u003ch3\u003eHow strong is the mount?\u003c\/h3\u003e\u003cp\u003eIt is built from 3\/16-inch hand-welded steel plating to handle the strain of pushing snow through harsh winter conditions.\u003c\/p\u003e\u003ch3\u003eHow fast can I connect the plow blade?\u003c\/h3\u003e\u003cp\u003eThe quick-connect latches let you attach or remove your Plow Pro blade in minutes, so you are ready before the snow starts.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eWhy Super ATV\u003c\/h2\u003e\u003cp\u003eSuper ATV builds heavy-duty UTV parts engineered around specific platforms and backs them with strong warranty coverage. This Xpedition plow mount reflects that with thick hand-welded steel, factory-point mounting, and a quick-connect design tuned to the Plow Pro system.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eComplete Your Xpedition Snow Plow Setup\u003c\/h2\u003e\u003cp\u003ePair this Plow Pro Snow Plow Mount with a Super ATV Plow Pro blade to finish a winter-ready Xpedition. Confirm your 2024+ trim, make sure you are running a Plow Pro blade for compatibility, and check whether you want a winch or push-tube kit to complete the plow system before install.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Does this mount fit my Polaris Xpedition?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is designed for 2024+ Polaris Xpedition ADV and XP trims, including the 5-seat versions. Verify your year and trim against the fitment list before ordering.\"}},{\"@type\":\"Question\",\"name\":\"What plow blades work with this mount?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"This mount is compatible with Super ATV Plow Pro snow plow blades only. It is not designed to work with other plow blade systems.\"}},{\"@type\":\"Question\",\"name\":\"Do I have to drill to install it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. The mount bolts to your factory OEM mounting points with no drilling required, making installation straightforward.\"}},{\"@type\":\"Question\",\"name\":\"Can I leave the mount on all winter?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. Its low-profile design lets you leave it on your Xpedition year-round without interfering with normal riding.\"}},{\"@type\":\"Question\",\"name\":\"How strong is the mount?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is built from 3\/16-inch hand-welded steel plating to handle the strain of pushing snow through harsh winter conditions.\"}},{\"@type\":\"Question\",\"name\":\"How fast can I connect the plow blade?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The quick-connect latches let you attach or remove your Plow Pro blade in minutes, so you are ready before the snow starts.\"}}]}\u003c\/script\u003e","brand":"SuperATV","offers":[{"title":"Default Title","offer_id":51037394698276,"sku":"SPM-P-XPD-02","price":211.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/polaris-xpedition-snow-plow-mount_01.jpg?v=1783562510"},{"product_id":"universal-plow-pro-snow-plow-lift-drop-brackets-superatv","title":"SuperATV Plow Pro UTV Snow Plow Drop Brackets","description":"\u003cp\u003e\u003cstrong\u003eRunning a lift kit taller than 3 inches makes your UTV snow plow's tilt angle useless, and Super ATV's Plow Pro Snow Plow Drop Brackets fix exactly that by dropping the blade back into the optimal plowing range for lifts up to 5 inches.\u003c\/strong\u003e Made from heavy-duty 1\/4-inch steel, they bolt straight to your Plow Pro Snow Plow so you keep full ground clearance and still move snow effectively all winter.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRestores the correct plow tilt angle on lifted machines\u003c\/li\u003e\n\u003cli\u003eCompatible with Super ATV Plow Pro Snow Plows\u003c\/li\u003e\n\u003cli\u003eDesigned for lift kits up to 5 inches\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 1\/4-inch steel construction\u003c\/li\u003e\n\u003cli\u003eBolt-on installation directly to the Plow Pro Snow Plow\u003c\/li\u003e\n\u003cli\u003eKeeps your added ground clearance while plowing effectively\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBuilt To Solve: Plowing With A Lift Kit Over 3 Inches\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLift kits over 3 inches leave the plow blade too high to angle correctly\u003c\/li\u003e\n\u003cli\u003ePlow tilt adjustment becomes useless on a lifted UTV\u003c\/li\u003e\n\u003cli\u003eLosing plowing performance after adding ground clearance and bigger tires\u003c\/li\u003e\n\u003cli\u003eThe blade can no longer reach the optimal plowing range\u003c\/li\u003e\n\u003cli\u003eWanting both lift-kit clearance and effective snow removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBest For: Lifted UTV Owners Running A Plow Pro Snow Plow\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUTV and SXS owners with lift kits up to 5 inches\u003c\/li\u003e\n\u003cli\u003eRiders who plow snow and also run larger tires or lifts\u003c\/li\u003e\n\u003cli\u003eOwners of a Super ATV Plow Pro Snow Plow\u003c\/li\u003e\n\u003cli\u003eAnyone whose plow blade angle is off after lifting the machine\u003c\/li\u003e\n\u003cli\u003eWinter property, ranch, and trail plowing on lifted rigs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Snow plow lift drop brackets\u003c\/li\u003e\n\u003cli\u003eMaterial: Heavy-duty 1\/4-inch steel\u003c\/li\u003e\n\u003cli\u003eCompatibility: Super ATV Plow Pro Snow Plows\u003c\/li\u003e\n\u003cli\u003eLift range: Designed for lift kits up to 5 inches\u003c\/li\u003e\n\u003cli\u003eInstallation: Bolt-on to the Plow Pro Snow Plow\u003c\/li\u003e\n\u003cli\u003eWarranty: 3-year against manufacturing defects\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: SPB-DB-001\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThese drop brackets are universal for Super ATV Plow Pro Snow Plows on machines running a lift kit up to 5 inches. They mount to the Plow Pro Snow Plow itself, not to a specific make or model. Confirm you run a Super ATV Plow Pro Snow Plow and a lift of 5 inches or less before ordering; fitment is not guaranteed on other plow brands or on lifts taller than 5 inches.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhy do I need drop brackets to plow with a lift kit?\u003c\/h3\u003e\n\u003cp\u003eA lift kit taller than 3 inches raises the plow blade so high that its tilt angle no longer works. These drop brackets lower the blade back into the optimal plowing range so it can move snow effectively while you keep your added ground clearance.\u003c\/p\u003e\n\u003ch3\u003eWhat size lift do these work with?\u003c\/h3\u003e\n\u003cp\u003eThey are designed for lift kits up to 5 inches. They drop your Plow Pro Snow Plow blade to the correct plowing height for lifted machines in that range.\u003c\/p\u003e\n\u003ch3\u003eWill these fit my snow plow?\u003c\/h3\u003e\n\u003cp\u003eThey fit Super ATV Plow Pro Snow Plows. They mount to the plow itself rather than to a specific vehicle, so confirm you run a Plow Pro Snow Plow before ordering. They are not designed for other plow brands.\u003c\/p\u003e\n\u003ch3\u003eWhat are the drop brackets made of?\u003c\/h3\u003e\n\u003cp\u003eThey are made from heavy-duty 1\/4-inch steel for strength and durability through hard winter plowing.\u003c\/p\u003e\n\u003ch3\u003eHow do they install?\u003c\/h3\u003e\n\u003cp\u003eThey bolt straight to your Plow Pro Snow Plow and drop the blade into the optimal plowing range. From there you adjust the blade tilt angle as you normally would.\u003c\/p\u003e\n\u003ch3\u003eDo they change how I adjust my blade angle?\u003c\/h3\u003e\n\u003cp\u003eNo. Once installed, you set the blade tilt angle the same way you always have. The brackets simply relocate the blade to the correct height for a lifted machine.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy Super ATV\u003c\/h2\u003e\n\u003cp\u003eSuper ATV engineers heavy-duty off-road and plow components built for real winter abuse, and backs this drop bracket set with a 3-year warranty against manufacturing defects. Thick 1\/4-inch steel and a direct bolt-on design make it a simple, durable fix for plowing on a lifted machine.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eComplete Your Lifted UTV Snow Plow Setup\u003c\/h2\u003e\n\u003cp\u003eThese drop brackets are the piece that makes plowing work after a lift, so pair them with the rest of your setup. Confirm your lift height is 5 inches or less, make sure you are running a Super ATV Plow Pro Snow Plow, and check that your plow mount and blade are ready before winter. Add the brackets to reset your blade angle and get back to moving snow.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\"@type\": \"Question\", \"name\": \"Why do I need drop brackets to plow with a lift kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A lift kit taller than 3 inches raises the plow blade so high that its tilt angle no longer works. These drop brackets lower the blade back into the optimal plowing range so it can move snow effectively while you keep your added ground clearance.\"}},\n    {\"@type\": \"Question\", \"name\": \"What size lift do these work with?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are designed for lift kits up to 5 inches. They drop your Plow Pro Snow Plow blade to the correct plowing height for lifted machines in that range.\"}},\n    {\"@type\": \"Question\", \"name\": \"Will these fit my snow plow?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They fit Super ATV Plow Pro Snow Plows. They mount to the plow itself rather than to a specific vehicle, so confirm you run a Plow Pro Snow Plow before ordering. They are not designed for other plow brands.\"}},\n    {\"@type\": \"Question\", \"name\": \"What are the drop brackets made of?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They are made from heavy-duty 1\/4-inch steel for strength and durability through hard winter plowing.\"}},\n    {\"@type\": \"Question\", \"name\": \"How do they install?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They bolt straight to your Plow Pro Snow Plow and drop the blade into the optimal plowing range. From there you adjust the blade tilt angle as you normally would.\"}},\n    {\"@type\": \"Question\", \"name\": \"Do they change how I adjust my blade angle?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Once installed, you set the blade tilt angle the same way you always have. The brackets simply relocate the blade to the correct height for a lifted machine.\"}}\n  ]\n}\n\u003c\/script\u003e","brand":"SuperATV","offers":[{"title":"Default Title","offer_id":51062679273508,"sku":"SPB-DB-001-02","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/snow_plow_drop_bracket_1.jpg?v=1784066819"}],"url":"https:\/\/dunes2dezertsxs.com\/collections\/snow-plow-accessories.oembed?page=5","provider":"Dunes 2 Dezert SXS","version":"1.0","type":"link"}