{"title":"Can-Am Defender Windshields","description":"\u003cp\u003eShop Can-Am Defender windshields for the HD5, HD7, HD8, HD9, HD10 and HD11, including MAX models. Choose a full windshield for maximum weather protection, a vented or flip windshield for airflow control, a half windshield for open-cab riding, DOT-approved glass for long-term clarity, or a MaxDrive power flip windshield you control from the dash.\u003c\/p\u003e\u003cp\u003eRunning a front windshield alone pulls dust into the cab from behind, so pair it with a Can-Am Defender rear windshield. Rear options include solid, sliding, glass and glass sliding versions. Check each product's fitment list for your exact HD size and trim, since some styles are made specifically for the Defender HD11 and some rear glass options do not fit XMR models.\u003c\/p\u003e","products":[{"product_id":"superatv-can-am-defender-full-windshield","title":"SuperATV Can-Am Defender Full Windshield (2016+)","description":"\u003cp\u003e\u003cstrong\u003eThe SuperATV Can-Am Defender Full Windshield closes off the front of your cab against wind, mud, debris and weather, cut from 1\/4-inch polycarbonate to fit Defender HD5, HD7, HD8, HD9, HD10 and HD11 models.\u003c\/strong\u003e A full-length rubber bulb seal and clamps hold it quiet and rattle-free on rough ground, and you choose standard clear, scratch-resistant clear or scratch-resistant dark tint.\u003c\/p\u003e\u003cp\u003eLooking for a Can-Am Defender windshield that seals the whole front of the cab? This is the Can-Am Defender front windshield for owners who want full coverage, and it is also a direct-fit windshield for Can-Am Defender MAX trims. The scratch-resistant panels make it a Can-Am Defender hard coated windshield, and the dark tint option gives you a Can-Am Defender tinted windshield that cuts glare. Like SuperATV's other Can-Am Defender windshields, one set of part numbers covers HD5 through HD11, so the same UTV full windshield serves as a Can-Am Defender HD10 windshield or a front windshield for Can-Am Defender HD9 machines, all in 1\/4-inch polycarbonate windshield construction.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFull front-cab protection from wind, mud, debris and weather\u003c\/li\u003e\n\u003cli\u003e1\/4-inch polycarbonate, rated by SuperATV at 250 times stronger than glass and 25 times stronger than acrylic\u003c\/li\u003e\n\u003cli\u003eFull-length rubber bulb seal for a quiet, rattle-free fit\u003c\/li\u003e\n\u003cli\u003eDurable clamps that hold the windshield on uneven trails\u003c\/li\u003e\n\u003cli\u003eXR Optic Hard Coating on the scratch-resistant versions for scratch, scuff and UV resistance\u003c\/li\u003e\n\u003cli\u003eThree panel options: standard clear, scratch-resistant clear, scratch-resistant dark tint\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBuilt To Solve: Wind, Mud and Cold in an Open Defender Cab\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWind and cold blasting the cab on early-morning work runs and winter rides\u003c\/li\u003e\n\u003cli\u003eMud and roost from the front wheels landing on the driver and passenger\u003c\/li\u003e\n\u003cli\u003eTrail debris and low branches reaching into an open cab\u003c\/li\u003e\n\u003cli\u003eHazing on uncoated windshields after a season of dust (choose a scratch-resistant panel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBest For: Defender Owners Who Want Full Front Coverage\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRanch, farm and work Defenders that run in cold, wet or muddy conditions\u003c\/li\u003e\n\u003cli\u003eHunters and trail riders who want a sealed front without the cost of glass\u003c\/li\u003e\n\u003cli\u003eOwners pairing a front windshield with a Defender rear windshield and roof to cut dust swirl\u003c\/li\u003e\n\u003cli\u003eRiders who want airflow control should look at the vented full or flip windshield instead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4-inch polycarbonate\u003c\/li\u003e\n\u003cli\u003ePanel options: Standard Polycarbonate - Clear; Scratch-Resistant Polycarbonate - Clear; Scratch-Resistant Polycarbonate - Dark Tint\u003c\/li\u003e\n\u003cli\u003eCoating: XR Optic Hard Coating (scratch-resistant versions)\u003c\/li\u003e\n\u003cli\u003eSealing: full-length rubber bulb seal\u003c\/li\u003e\n\u003cli\u003eMounting: clamp-on\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Numbers: WS-CA-DEF-75 (Standard Clear), WS-CA-DEF-70 (Scratch-Resistant Clear), WS-CA-DEF-73 (Scratch-Resistant Dark Tint)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCan-Am Defender HD5 and HD5 DPS (2017-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD7, HD7 DPS and MAX HD7 (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD8, DPS, XT and XT Cab, plus MAX HD8 versions (2016-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD9, HD9 DPS, HD9 DPS Cab and HD9 XT, plus MAX HD9, MAX HD9 DPS and MAX HD9 XT (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD10 base, DPS, XT, XT Cab, XTP, XMR, Mossy Oak, Pro, Limited and 6x6, plus MAX HD10 DPS, XT, XT Cab, XMR, Lone Star Edition and Limited (2016+; exact start year varies by trim)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD11 Limited, XMR w\/Half Doors, XT and XT Cab, plus MAX HD11 Limited, Lone Star, Lone Star Cab, XMR w\/Half Doors, XT and XT Cab (2026+)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSuperATV notes this windshield can be used with most soft or hard tops.\u003c\/p\u003e\u003cp\u003eSuperATV lists these applications by trim. Fitment is not guaranteed on trims or model years not listed above, or on machines with modified cab structures; confirm your exact model before ordering.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWill this full windshield fit my Can-Am Defender HD9 or HD11?\u003c\/h3\u003e\u003cp\u003eYes. SuperATV sells the same full windshield part numbers for the Defender HD5, HD7, HD8, HD9, HD10 and HD11, including the listed MAX trims. Check the fitment list above for your exact trim.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between the standard and scratch-resistant panels?\u003c\/h3\u003e\u003cp\u003eBoth are 1\/4-inch polycarbonate. The scratch-resistant versions add SuperATV's XR Optic Hard Coating, which resists scratches and scuffs and adds UV protection, so they stay clearer in dusty conditions.\u003c\/p\u003e\u003ch3\u003eDoes it work with a roof on my Defender?\u003c\/h3\u003e\u003cp\u003eSuperATV states it can be used with most soft or hard tops.\u003c\/p\u003e\u003ch3\u003eHow does it mount?\u003c\/h3\u003e\u003cp\u003eIt is cut for the Defender hood and mounts with clamps and a full-length rubber bulb seal. SuperATV describes installation as fast and straightforward, and an install sheet and install video are available.\u003c\/p\u003e\u003ch3\u003eShould I get a full or a vented full windshield?\u003c\/h3\u003e\u003cp\u003eA full windshield gives the maximum seal and the simplest setup, which suits cold weather and mud. A vented full windshield keeps the same coverage but adds adjustable vents for airflow on warmer days.\u003c\/p\u003e\u003ch3\u003eWhy add a rear windshield too?\u003c\/h3\u003e\u003cp\u003eRunning a front windshield alone can pull dust into the cab from behind. Pairing it with a Defender rear windshield closes that gap.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eWhy SuperATV\u003c\/h2\u003e\u003cp\u003eSuperATV designs and cuts its windshields in-house and backs each one with a 1-year warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get the vehicle-specific Defender fit without hunting across sites.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eComplete Your Can-Am Defender Cab Setup\u003c\/h2\u003e\u003cp\u003ePick the panel that matches your riding: standard clear for value, scratch-resistant clear for dusty conditions, or dark tint for glare. Confirm your Defender HD size and trim in the fitment list, then consider a matching Defender rear windshield and roof to stop dust from being pulled into the cab.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eInstallation Video\u003c\/h2\u003e\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/0JbMTtbfAfs\" title=\"How to Install SuperATV's Full Poly Windshield on the Can-Am Defender\" frameborder=\"0\" allowfullscreen loading=\"lazy\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@graph\": [{\"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will this full windshield fit my Can-Am Defender HD9 or HD11?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. SuperATV sells the same full windshield part numbers for the Defender HD5, HD7, HD8, HD9, HD10 and HD11, including the listed MAX trims. Check the fitment list above for your exact trim.\"}}, {\"@type\": \"Question\", \"name\": \"What is the difference between the standard and scratch-resistant panels?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Both are 1\/4-inch polycarbonate. The scratch-resistant versions add SuperATV's XR Optic Hard Coating, which resists scratches and scuffs and adds UV protection, so they stay clearer in dusty conditions.\"}}, {\"@type\": \"Question\", \"name\": \"Does it work with a roof on my Defender?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV states it can be used with most soft or hard tops.\"}}, {\"@type\": \"Question\", \"name\": \"How does it mount?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is cut for the Defender hood and mounts with clamps and a full-length rubber bulb seal. SuperATV describes installation as fast and straightforward, and an install sheet and install video are available.\"}}, {\"@type\": \"Question\", \"name\": \"Should I get a full or a vented full windshield?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A full windshield gives the maximum seal and the simplest setup, which suits cold weather and mud. A vented full windshield keeps the same coverage but adds adjustable vents for airflow on warmer days.\"}}, {\"@type\": \"Question\", \"name\": \"Why add a rear windshield too?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Running a front windshield alone can pull dust into the cab from behind. Pairing it with a Defender rear windshield closes that gap.\"}}]}, {\"@type\": \"VideoObject\", \"name\": \"How to Install SuperATV's Full Poly Windshield on the Can-Am Defender\", \"description\": \"Official SuperATV install video: How to Install SuperATV's Full Poly Windshield on the Can-Am Defender.\", \"thumbnailUrl\": \"https:\/\/i.ytimg.com\/vi\/0JbMTtbfAfs\/hqdefault.jpg\", \"uploadDate\": \"2024-04-30T11:27:59-07:00\", \"embedUrl\": \"https:\/\/www.youtube.com\/embed\/0JbMTtbfAfs\", \"contentUrl\": \"https:\/\/www.youtube.com\/watch?v=0JbMTtbfAfs\"}]}\u003c\/script\u003e","brand":"SuperATV","offers":[{"title":"Standard Polycarbonate - Clear","offer_id":67602587222052,"sku":"WS-CA-DEF-75","price":149.95,"currency_code":"USD","in_stock":true},{"title":"Scratch-Resistant Polycarbonate - Clear","offer_id":67602587254820,"sku":"WS-CA-DEF-70","price":174.95,"currency_code":"USD","in_stock":true},{"title":"Scratch-Resistant Polycarbonate - Dark Tint","offer_id":67602587287588,"sku":"WS-CA-DEF-73","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/can-am-defender-full-windshield-01.jpg?v=1791169429"},{"product_id":"superatv-can-am-defender-half-windshield","title":"SuperATV Can-Am Defender Half Windshield (2016+)","description":"\u003cp\u003e\u003cstrong\u003eThe SuperATV Can-Am Defender Half Windshield uses a forward-facing lip to route wind and dust up and over the cab, so Defender HD5 through HD11 owners keep open-cab airflow without taking the blast in the face.\u003c\/strong\u003e It is impact-resistant polycarbonate, mounts to the frame with the included clamps, and its low profile keeps your sightlines clear.\u003c\/p\u003e\u003cp\u003eThis is a half windshield for Can-Am Defender owners who want less wind without closing in the cab. As a UTV half windshield it is the lightest, simplest Can-Am Defender windshield option, and the same polycarbonate windshield fits as a Can-Am Defender HD8 windshield, Can-Am Defender HD9 windshield, Can-Am Defender HD10 windshield or Can-Am Defender HD11 windshield, plus the windshield for Can-Am Defender MAX trims listed in the fitment section.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForward-facing lip routes airflow up and over the cab\u003c\/li\u003e\n\u003cli\u003eLow-profile design preserves open-cab visibility\u003c\/li\u003e\n\u003cli\u003eImpact-resistant polycarbonate, rated by SuperATV at 25 times stronger than acrylic and 250 times stronger than glass\u003c\/li\u003e\n\u003cli\u003eMounts to the frame with the included clamps\u003c\/li\u003e\n\u003cli\u003eVehicle-specific fit for the Defender\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBuilt To Solve: Wind and Dust Blast in an Open Defender\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWind and dust hitting the driver in the face at speed\u003c\/li\u003e\n\u003cli\u003eSand and grit kicked over the hood on dirt roads\u003c\/li\u003e\n\u003cli\u003eWanting protection without sealing the cab on hot days\u003c\/li\u003e\n\u003cli\u003eFull windshields that feel too closed-in for summer work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBest For: Hot-Weather Defender Riders Who Want Airflow\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesert, farm and ranch Defenders that run in high heat\u003c\/li\u003e\n\u003cli\u003eOwners who want a simple, affordable wind deflector\u003c\/li\u003e\n\u003cli\u003eRiders who still want an open-cab feel\u003c\/li\u003e\n\u003cli\u003eRiders who need cold or wet weather protection should step up to a full, vented or flip windshield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4-inch polycarbonate\u003c\/li\u003e\n\u003cli\u003eStyle: half windshield with forward-facing lip\u003c\/li\u003e\n\u003cli\u003eMounting: frame clamps (included)\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: HWS-CA-DEF-71\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCan-Am Defender HD5 and HD5 DPS (2017-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD7, HD7 DPS and MAX HD7 (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD8, DPS, XT and XT Cab, plus MAX HD8 versions (2016-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD9, HD9 DPS, HD9 DPS Cab and HD9 XT, plus MAX HD9, MAX HD9 DPS and MAX HD9 XT (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD10 base, DPS, XT, XT Cab, XTP, XMR, Mossy Oak, Pro, Limited and 6x6, plus MAX HD10 DPS, XT, XT Cab, XMR, Lone Star Edition and Limited (2016+; exact start year varies by trim)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD11 Limited, XMR w\/Half Doors, XT and XT Cab, plus MAX HD11 Limited, Lone Star, Lone Star Cab, XMR w\/Half Doors, XT and XT Cab (2026+)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSuperATV notes this half windshield works with most hard and soft tops.\u003c\/p\u003e\u003cp\u003eSuperATV lists these applications by trim. Fitment is not guaranteed on trims or model years not listed above, or on machines with modified cab structures; confirm your exact model before ordering.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eDoes the half windshield fit every Defender HD size?\u003c\/h3\u003e\u003cp\u003eSuperATV sells the same half windshield, part HWS-CA-DEF-71, for the Defender HD5, HD7, HD8, HD9, HD10 and HD11, including the listed MAX trims.\u003c\/p\u003e\u003ch3\u003eHow does a half windshield keep wind off me?\u003c\/h3\u003e\u003cp\u003eThe raised, forward-facing lip redirects wind and dust overhead while the lower height keeps your view open.\u003c\/p\u003e\u003ch3\u003eWill it work with my roof?\u003c\/h3\u003e\u003cp\u003eSuperATV states it works with most hard and soft tops.\u003c\/p\u003e\u003ch3\u003eHow is it installed?\u003c\/h3\u003e\u003cp\u003eIt mounts to your frame with the included clamps. An install sheet is available for this part.\u003c\/p\u003e\u003ch3\u003eShould I get a half or a 3-in-1 windshield?\u003c\/h3\u003e\u003cp\u003eChoose half for hot-weather airflow and simplicity. A 3-in-1 or flip windshield gives more all-season flexibility and protection.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eWhy SuperATV\u003c\/h2\u003e\u003cp\u003eSuperATV designs and cuts its windshields in-house and backs each one with a 1-year warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get the vehicle-specific Defender fit without hunting across sites.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFinish Your Can-Am Defender Open-Cab Setup\u003c\/h2\u003e\u003cp\u003eThe half windshield is the simplest way to cut wind and dust while keeping the Defender's open-cab feel. Confirm your HD size and trim in the fitment list. If you ride in cold or wet weather, compare the full, vented or flip windshield before ordering.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does the half windshield fit every Defender HD size?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV sells the same half windshield, part HWS-CA-DEF-71, for the Defender HD5, HD7, HD8, HD9, HD10 and HD11, including the listed MAX trims.\"}}, {\"@type\": \"Question\", \"name\": \"How does a half windshield keep wind off me?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The raised, forward-facing lip redirects wind and dust overhead while the lower height keeps your view open.\"}}, {\"@type\": \"Question\", \"name\": \"Will it work with my roof?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV states it works with most hard and soft tops.\"}}, {\"@type\": \"Question\", \"name\": \"How is it installed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It mounts to your frame with the included clamps. An install sheet is available for this part.\"}}, {\"@type\": \"Question\", \"name\": \"Should I get a half or a 3-in-1 windshield?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Choose half for hot-weather airflow and simplicity. A 3-in-1 or flip windshield gives more all-season flexibility and protection.\"}}]}\u003c\/script\u003e","brand":"SuperATV","offers":[{"title":"Default Title","offer_id":67602587746340,"sku":"HWS-CA-DEF-71","price":114.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/can-am-defender-half-windshield-01.jpg?v=1791169471"},{"product_id":"superatv-can-am-defender-glass-windshield","title":"SuperATV Can-Am Defender Glass Windshield (2016+)","description":"\u003cp\u003e\u003cstrong\u003eThe SuperATV Can-Am Defender Glass Windshield turns a Defender HD5 through HD11 into an all-season machine with DOT-approved laminated glass, a powder-coated steel frame and an included manual wiper.\u003c\/strong\u003e BreezeRite vents set open, halfway or closed for airflow, and Secure Seal Technology keeps air, water and trail debris out of the cab.\u003c\/p\u003e\u003cp\u003eIf you want a Can-Am Defender glass windshield with wiper included, this is it: a Can-Am Defender front glass windshield in DOT-approved laminated glass, which makes it a DOT approved UTV windshield. The same UTV glass windshield fits as a Can-Am Defender HD10 glass windshield, a Can-Am Defender HD9 windshield and a windshield for Can-Am Defender MAX trims, and riders shopping for a 2022 Can-Am Defender glass windshield get the same part as every other listed year. Among Can-Am Defender windshield options, glass is the choice for long-term clarity.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDOT-approved laminated glass for clear, automotive-style protection\u003c\/li\u003e\n\u003cli\u003ePowder-coated steel frame\u003c\/li\u003e\n\u003cli\u003eBreezeRite vents set open, halfway or closed\u003c\/li\u003e\n\u003cli\u003eIncluded manual wiper, installed on the driver's side\u003c\/li\u003e\n\u003cli\u003eSecure Seal Technology to stop air, water and trail debris\u003c\/li\u003e\n\u003cli\u003eGlass comes preinstalled in the frame\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBuilt To Solve: Scratched Poly and Poor Visibility in a Defender\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePolycarbonate windshields that haze and scratch in dust and sand\u003c\/li\u003e\n\u003cli\u003eMud and rain on the windshield with no way to clear it\u003c\/li\u003e\n\u003cli\u003eCold, wet rides where drafts get into the cab\u003c\/li\u003e\n\u003cli\u003eLosing airflow when you close up the front\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBest For: All-Season Defender Work and Trail Use\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOwners who want long-term clarity and scratch resistance\u003c\/li\u003e\n\u003cli\u003eDefenders that work in rain, mud or cold\u003c\/li\u003e\n\u003cli\u003eRiders who want a wiper and vents in one windshield\u003c\/li\u003e\n\u003cli\u003eRiders who prioritise impact resistance on aggressive terrain should consider polycarbonate instead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGlass: DOT-approved laminated glass\u003c\/li\u003e\n\u003cli\u003eFrame: powder-coated steel\u003c\/li\u003e\n\u003cli\u003eVents: BreezeRite, open \/ halfway \/ closed\u003c\/li\u003e\n\u003cli\u003eWiper: manual, driver's side (included)\u003c\/li\u003e\n\u003cli\u003eSealing: Secure Seal Technology with bulb seal\u003c\/li\u003e\n\u003cli\u003eMounting: factory mounting points\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: GWS-CA-DEF-S-01\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCan-Am Defender HD5 and HD5 DPS (2017-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD7, HD7 DPS, MAX HD7 and MAX HD7 DPS (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD8, DPS, XT and XT Cab, plus MAX HD8 versions (2016-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD9, HD9 DPS, MAX HD9 and MAX HD9 DPS (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD10 base, DPS, XT, XT Cab, XTP, XMR, Mossy Oak, Pro, Limited and 6x6, plus MAX HD10 DPS, XT, XT Cab, XMR, Lone Star Edition and Limited (2016+; exact start year varies by trim)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD11 Limited, XMR w\/Half Doors, XT and XT Cab, plus MAX HD11 Limited, Lone Star, Lone Star Cab, XMR w\/Half Doors, XT and XT Cab (2026+)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSuperATV notes this windshield can be used with most soft or hard tops and is compatible with side view mirrors.\u003c\/p\u003e\u003cp\u003eSuperATV lists these applications by trim. Fitment is not guaranteed on trims or model years not listed above, or on machines with modified cab structures; confirm your exact model before ordering.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eIs this Defender glass windshield DOT approved?\u003c\/h3\u003e\u003cp\u003eYes. SuperATV states it is made from DOT-approved laminated glass.\u003c\/p\u003e\u003ch3\u003eDoes it come with a wiper?\u003c\/h3\u003e\u003cp\u003eYes. It includes a manual wiper that installs on the driver's side to clear mud and grime.\u003c\/p\u003e\u003ch3\u003eCan I still get airflow with a glass windshield?\u003c\/h3\u003e\u003cp\u003eYes. The built-in BreezeRite vents can be set open, halfway or closed.\u003c\/p\u003e\u003ch3\u003eWhich Defender models does it fit?\u003c\/h3\u003e\u003cp\u003eSuperATV sells the same glass windshield, GWS-CA-DEF-S-01, for the Defender HD5, HD7, HD8, HD9, HD10 and HD11 trims in the fitment list, including MAX models.\u003c\/p\u003e\u003ch3\u003eHow hard is installation?\u003c\/h3\u003e\u003cp\u003eThe glass comes preinstalled in the frame. You add the bulb seal, mount it to the factory mounting points and install the wiper. An install sheet and install video are available.\u003c\/p\u003e\u003ch3\u003eGlass or polycarbonate for a Defender?\u003c\/h3\u003e\u003cp\u003eGlass is best for long-term clarity and wiper use. Polycarbonate is lighter and far more impact resistant for aggressive terrain.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eWhy SuperATV\u003c\/h2\u003e\u003cp\u003eSuperATV designs and cuts its windshields in-house and backs each one with a 1-year warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get the vehicle-specific Defender fit without hunting across sites.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eUpgrade Your Can-Am Defender for All-Season Riding\u003c\/h2\u003e\u003cp\u003eConfirm your Defender HD size and trim in the fitment list before ordering. For a fully closed cab, pair the glass windshield with a Defender rear windshield and roof; for dash-switch operation, compare the MaxDrive Power Flip Glass Windshield.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eInstallation Video\u003c\/h2\u003e\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/NEMHp9GpuOI\" title=\"Can-Am Defender Glass Windshield Install - SuperATV\" frameborder=\"0\" allowfullscreen loading=\"lazy\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@graph\": [{\"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Is this Defender glass windshield DOT approved?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. SuperATV states it is made from DOT-approved laminated glass.\"}}, {\"@type\": \"Question\", \"name\": \"Does it come with a wiper?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It includes a manual wiper that installs on the driver's side to clear mud and grime.\"}}, {\"@type\": \"Question\", \"name\": \"Can I still get airflow with a glass windshield?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The built-in BreezeRite vents can be set open, halfway or closed.\"}}, {\"@type\": \"Question\", \"name\": \"Which Defender models does it fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV sells the same glass windshield, GWS-CA-DEF-S-01, for the Defender HD5, HD7, HD8, HD9, HD10 and HD11 trims in the fitment list, including MAX models.\"}}, {\"@type\": \"Question\", \"name\": \"How hard is installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The glass comes preinstalled in the frame. You add the bulb seal, mount it to the factory mounting points and install the wiper. An install sheet and install video are available.\"}}, {\"@type\": \"Question\", \"name\": \"Glass or polycarbonate for a Defender?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Glass is best for long-term clarity and wiper use. Polycarbonate is lighter and far more impact resistant for aggressive terrain.\"}}]}, {\"@type\": \"VideoObject\", \"name\": \"Can-Am Defender Glass Windshield Install - SuperATV\", \"description\": \"Official SuperATV install video: Can-Am Defender Glass Windshield Install - SuperATV.\", \"thumbnailUrl\": \"https:\/\/i.ytimg.com\/vi\/NEMHp9GpuOI\/hqdefault.jpg\", \"uploadDate\": \"2020-12-29T13:00:05-08:00\", \"embedUrl\": \"https:\/\/www.youtube.com\/embed\/NEMHp9GpuOI\", \"contentUrl\": \"https:\/\/www.youtube.com\/watch?v=NEMHp9GpuOI\"}]}\u003c\/script\u003e","brand":"SuperATV","offers":[{"title":"Default Title","offer_id":67602588270628,"sku":"GWS-CA-DEF-S-01","price":734.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/can-am-defender-glass-windshield-01.jpg?v=1791169521"},{"product_id":"superatv-can-am-defender-maxdrive-power-flip-glass-windshield","title":"SuperATV Can-Am Defender MaxDrive Power Flip Glass Windshield (2016+)","description":"\u003cp\u003e\u003cstrong\u003eThe SuperATV Can-Am Defender MaxDrive Power Flip Glass Windshield opens, closes or stops anywhere from a dash rocker switch, giving Defender HD5 through HD11 owners DOT-approved laminated glass with push-button airflow control.\u003c\/strong\u003e Electronic actuators hold position on rough ground, the bulb seal comes preinstalled, and an optional motorized wiper and washer kit is available.\u003c\/p\u003e\u003cp\u003eThis Can-Am Defender flip glass windshield is the powered version of a Can-Am Defender glass flip up windshield: a switch moves it instead of latches. Shoppers comparing a Can-Am Defender flip up glass windshield or a Can-Am Defender glass flip windshield get DOT-approved laminated glass here, and the optional kit turns it into a Can-Am Defender glass windshield with wiper and washer. It is a power flip windshield and an electric UTV windshield in one, and a step up from a standard UTV glass windshield or any manual Can-Am Defender windshield.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDash-controlled power flip: opens, closes or stops anywhere with a rocker switch\u003c\/li\u003e\n\u003cli\u003eDOT-approved laminated glass\u003c\/li\u003e\n\u003cli\u003eAutomotive-style metal frame\u003c\/li\u003e\n\u003cli\u003eElectronic actuators that hold tight on rough rides\u003c\/li\u003e\n\u003cli\u003eSecure Seal Technology with preinstalled bulb seal\u003c\/li\u003e\n\u003cli\u003eOptional wiper and washer kit with a self-parking motorized wiper\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBuilt To Solve: Stopping to Open or Close a Defender Windshield\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eClimbing out to latch or unlatch a manual flip windshield when the weather changes\u003c\/li\u003e\n\u003cli\u003eChoosing between full protection and airflow on the same ride\u003c\/li\u003e\n\u003cli\u003eScratched, hazy polycarbonate in dusty work environments\u003c\/li\u003e\n\u003cli\u003eMud and rain blocking the view on a glass windshield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBest For: Defender Owners Who Want Push-Button Comfort\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWork and ranch Defenders that move between weather conditions all day\u003c\/li\u003e\n\u003cli\u003eOwners who want glass clarity with switch-controlled airflow\u003c\/li\u003e\n\u003cli\u003eCold and wet climate riders who want the wiper and washer kit\u003c\/li\u003e\n\u003cli\u003eRiders on a budget may prefer the manual glass windshield or the polycarbonate MaxDrive version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGlass: DOT-approved laminated glass\u003c\/li\u003e\n\u003cli\u003eFrame: automotive-style metal frame\u003c\/li\u003e\n\u003cli\u003eOperation: 2 electric actuators, dash rocker switch\u003c\/li\u003e\n\u003cli\u003eOptions: Without Wiper and Washer Kit; With Wiper and Washer Kit\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Numbers: FGWS-CA-DEF-01 (without wiper kit), FGWS-CA-DEF-W-01 (with wiper and washer kit)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKit Includes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGlass windshield and frame assembly\u003c\/li\u003e\n\u003cli\u003eAll frame brackets\u003c\/li\u003e\n\u003cli\u003e(4) Clamps\u003c\/li\u003e\n\u003cli\u003e(2) Pairs of hinges\u003c\/li\u003e\n\u003cli\u003e(4) Actuator brackets\u003c\/li\u003e\n\u003cli\u003e(2) Actuators\u003c\/li\u003e\n\u003cli\u003eAll gaskets and seals\u003c\/li\u003e\n\u003cli\u003eWiring harness\u003c\/li\u003e\n\u003cli\u003eRocker switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOptional Wiper and Washer Kit Includes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(1) Wiper blade and arm\u003c\/li\u003e\n\u003cli\u003eWiper motor\u003c\/li\u003e\n\u003cli\u003eWasher fluid reservoir\u003c\/li\u003e\n\u003cli\u003eFlexible EPDM hose\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eWiring harnesses\u003c\/li\u003e\n\u003cli\u003eRocker switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCan-Am Defender HD5 and HD5 DPS (2017-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD7, HD7 DPS and MAX HD7 (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD8, DPS, XT and XT Cab, plus MAX HD8 versions (2016-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD9, HD9 DPS, HD9 DPS Cab and HD9 XT, plus MAX HD9, MAX HD9 DPS and MAX HD9 XT (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD10 base, DPS, XT, XT Cab, XTP, XMR, Mossy Oak, Pro, Limited and 6x6, plus MAX HD10 DPS, XT, XT Cab, XMR, Lone Star Edition and Limited (2016+; exact start year varies by trim)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD11 Limited, XMR w\/Half Doors, XT and XT Cab, plus MAX HD11 Limited, Lone Star, Lone Star Cab, XMR w\/Half Doors, XT and XT Cab (2026+)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSuperATV notes this windshield can be used with soft or hard tops.\u003c\/p\u003e\u003cp\u003eSuperATV lists these applications by trim. Fitment is not guaranteed on trims or model years not listed above, or on machines with modified cab structures; confirm your exact model before ordering.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eHow does the MaxDrive power flip work?\u003c\/h3\u003e\u003cp\u003eA dash-mounted rocker switch drives two electric actuators, so the windshield opens, closes or stops at any position in between.\u003c\/p\u003e\u003ch3\u003eIs the glass DOT approved?\u003c\/h3\u003e\u003cp\u003eYes. SuperATV states the windshield uses DOT-approved laminated glass.\u003c\/p\u003e\u003ch3\u003eDo I need the wiper and washer kit?\u003c\/h3\u003e\u003cp\u003eIt is optional. The kit adds a motorized wiper that parks itself when not in use, plus a washer reservoir. Installation uses predrilled holes and the included wire harness.\u003c\/p\u003e\u003ch3\u003eWhich Defender models does it fit?\u003c\/h3\u003e\u003cp\u003eSuperATV sells the same part numbers for the Defender HD5, HD7, HD8, HD9, HD10 and HD11 trims in the fitment list, including MAX models.\u003c\/p\u003e\u003ch3\u003eWill it rattle when closed?\u003c\/h3\u003e\u003cp\u003eSuperATV uses clamps to lock the windshield in place for a rattle-free ride, with a preinstalled bulb seal to seal out the elements.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eWhy SuperATV\u003c\/h2\u003e\u003cp\u003eSuperATV designs and cuts its windshields in-house and backs each one with a 1-year warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get the vehicle-specific Defender fit without hunting across sites.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003ePair Your Defender Power Flip Glass Windshield With the Right Rear Setup\u003c\/h2\u003e\u003cp\u003eChoose with or without the wiper and washer kit, then confirm your Defender HD size and trim in the fitment list. A Defender rear windshield and roof complete the enclosure; if you do not need glass, compare the polycarbonate MaxDrive Power Flip Windshield.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How does the MaxDrive power flip work?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A dash-mounted rocker switch drives two electric actuators, so the windshield opens, closes or stops at any position in between.\"}}, {\"@type\": \"Question\", \"name\": \"Is the glass DOT approved?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. SuperATV states the windshield uses DOT-approved laminated glass.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need the wiper and washer kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It is optional. The kit adds a motorized wiper that parks itself when not in use, plus a washer reservoir. Installation uses predrilled holes and the included wire harness.\"}}, {\"@type\": \"Question\", \"name\": \"Which Defender models does it fit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV sells the same part numbers for the Defender HD5, HD7, HD8, HD9, HD10 and HD11 trims in the fitment list, including MAX models.\"}}, {\"@type\": \"Question\", \"name\": \"Will it rattle when closed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV uses clamps to lock the windshield in place for a rattle-free ride, with a preinstalled bulb seal to seal out the elements.\"}}]}\u003c\/script\u003e","brand":"SuperATV","offers":[{"title":"Without Wiper and Washer Kit","offer_id":67602588794916,"sku":"FGWS-CA-DEF-01","price":1299.95,"currency_code":"USD","in_stock":true},{"title":"With Wiper and Washer Kit","offer_id":67602588827684,"sku":"FGWS-CA-DEF-W-01","price":1599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/can-am-defender-maxdrive-power-flip-glass-windshield-01.jpg?v=1791169574"},{"product_id":"superatv-can-am-defender-vented-windshield","title":"SuperATV Can-Am Defender Vented Windshield (2016+)","description":"\u003cp\u003e\u003cstrong\u003eThe SuperATV Can-Am Defender Vented Windshield gives Defender HD5 through HD11 owners full front coverage with adjustable airflow, using three-position BreezeRite vents or a flip-up vent panel in scratch-resistant 1\/4-inch polycarbonate.\u003c\/strong\u003e A full-length bulb seal keeps out wind, mud and rain, and XR Optic Hard Coating resists scratches and UV damage.\u003c\/p\u003e\u003cp\u003eAs a Can-Am Defender vented windshield, it sits between a sealed full windshield and a flip windshield: a scratch-resistant windshield with built-in vents. The XR Optic coating makes it a Can-Am Defender hard coated windshield, the dark tint flip-up panel version is a Can-Am Defender tinted windshield, and the BreezeRite version is the vented windshield to choose as a Can-Am Defender HD11 windshield. Anyone shopping for a Can-Am Defender HD10 windshield or a windshield for Can-Am Defender MAX trims can pick either vent style. Whichever you choose, it is a UTV vented windshield in 1\/4-inch polycarbonate, the same polycarbonate windshield material SuperATV uses across its Can-Am Defender windshield line.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThree-position BreezeRite vents, or a flip-up vent panel, for airflow control\u003c\/li\u003e\n\u003cli\u003e1\/4-inch polycarbonate, rated by SuperATV at 25 times stronger than acrylic and 250 times stronger than glass\u003c\/li\u003e\n\u003cli\u003eXR Optic Hard Coating resists scratches and UV damage\u003c\/li\u003e\n\u003cli\u003eFull-length bulb seal keeps out wind, mud and rain\u003c\/li\u003e\n\u003cli\u003eVehicle-specific fit\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBuilt To Solve: A Sealed Defender Cab That Gets Too Hot\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFull windshields that trap heat on warm days\u003c\/li\u003e\n\u003cli\u003eFogging behind a sealed windshield\u003c\/li\u003e\n\u003cli\u003eMud, rocks and branches reaching the cab on wooded trails\u003c\/li\u003e\n\u003cli\u003eUncoated poly that scratches and yellows in the sun\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBest For: Defender Riders Who Want Coverage and Airflow\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTrail and work Defenders that run across changing temperatures\u003c\/li\u003e\n\u003cli\u003eOwners who want less complexity than a flip windshield\u003c\/li\u003e\n\u003cli\u003eHD11 owners: choose the BreezeRite vent version, which is the only vented style SuperATV offers for the HD11\u003c\/li\u003e\n\u003cli\u003eRiders who want the maximum seal for cold and mud should choose the full windshield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4-inch polycarbonate with XR Optic Hard Coating\u003c\/li\u003e\n\u003cli\u003eVent styles: BreezeRite vents (clear); flip-up vent panel (clear or dark tint)\u003c\/li\u003e\n\u003cli\u003eSealing: full-length bulb seal\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Numbers: WS-CA-DEF-V-002-70 (BreezeRite, clear), WS-CA-DEF-V-001-70 (flip-up vent, clear), WS-CA-DEF-V-001-73 (flip-up vent, dark tint)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCan-Am Defender HD5 and HD5 DPS (2017-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD7, HD7 DPS and MAX HD7 (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD8, DPS, XT and XT Cab, plus MAX HD8 versions (2016-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD9, HD9 DPS, HD9 DPS Cab and HD9 XT, plus MAX HD9, MAX HD9 DPS and MAX HD9 XT (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD10 base, DPS, XT, XT Cab, XTP, XMR, Mossy Oak, Pro, Limited and 6x6, plus MAX HD10 DPS, XT, XT Cab, XMR, Lone Star Edition and Limited (2016+; exact start year varies by trim)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD11 Limited, XMR w\/Half Doors, XT and XT Cab, plus MAX HD11 Limited, Lone Star, Lone Star Cab, XMR w\/Half Doors, XT and XT Cab (2026+)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHD11 note:\u003c\/strong\u003e SuperATV offers only the BreezeRite vent version (WS-CA-DEF-V-002-70) for the Defender HD11. The flip-up vent panel versions are listed for HD5 through HD10 only. SuperATV notes this windshield works with most hard and soft tops.\u003c\/p\u003e\u003cp\u003eSuperATV lists these applications by trim. Fitment is not guaranteed on trims or model years not listed above, or on machines with modified cab structures; confirm your exact model before ordering.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhich vent style fits my Defender HD11?\u003c\/h3\u003e\u003cp\u003eOnly the BreezeRite vent version, WS-CA-DEF-V-002-70. SuperATV does not list the flip-up vent panel versions for the HD11.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between BreezeRite vents and the flip-up vent panel?\u003c\/h3\u003e\u003cp\u003eBreezeRite vents adjust and lock at any setting. The flip-up vent panel opens when you need a surge of airflow on hot days.\u003c\/p\u003e\u003ch3\u003eIs the windshield scratch resistant?\u003c\/h3\u003e\u003cp\u003eYes. It uses SuperATV's XR Optic Hard Coating, which adds scratch resistance and UV protection against fading or yellowing.\u003c\/p\u003e\u003ch3\u003eDoes it work with a roof?\u003c\/h3\u003e\u003cp\u003eSuperATV states it works with most hard and soft tops.\u003c\/p\u003e\u003ch3\u003eVented full or flip windshield for a Defender?\u003c\/h3\u003e\u003cp\u003eA vented full windshield gives always-on protection with adjustable airflow and fewer moving parts. A flip windshield gives more maximum airflow when opened.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eWhy SuperATV\u003c\/h2\u003e\u003cp\u003eSuperATV designs and cuts its windshields in-house and backs each one with a 1-year warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get the vehicle-specific Defender fit without hunting across sites.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eComplete Your Can-Am Defender Cab With the Right Vent Setup\u003c\/h2\u003e\u003cp\u003eChoose your vent style by Defender model: HD11 owners take the BreezeRite version; HD5 through HD10 owners can choose BreezeRite or the flip-up vent panel. Pair it with a Defender rear windshield to stop dust swirl in the cab.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Which vent style fits my Defender HD11?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Only the BreezeRite vent version, WS-CA-DEF-V-002-70. SuperATV does not list the flip-up vent panel versions for the HD11.\"}}, {\"@type\": \"Question\", \"name\": \"What is the difference between BreezeRite vents and the flip-up vent panel?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"BreezeRite vents adjust and lock at any setting. The flip-up vent panel opens when you need a surge of airflow on hot days.\"}}, {\"@type\": \"Question\", \"name\": \"Is the windshield scratch resistant?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It uses SuperATV's XR Optic Hard Coating, which adds scratch resistance and UV protection against fading or yellowing.\"}}, {\"@type\": \"Question\", \"name\": \"Does it work with a roof?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV states it works with most hard and soft tops.\"}}, {\"@type\": \"Question\", \"name\": \"Vented full or flip windshield for a Defender?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A vented full windshield gives always-on protection with adjustable airflow and fewer moving parts. A flip windshield gives more maximum airflow when opened.\"}}]}\u003c\/script\u003e","brand":"SuperATV","offers":[{"title":"BreezeRite Vents - Scratch-Resistant Clear (HD5-HD11)","offer_id":67602589351972,"sku":"WS-CA-DEF-V-002-70","price":319.95,"currency_code":"USD","in_stock":true},{"title":"Flip-Up Vent Panel - Scratch-Resistant Clear (HD5-HD10 only)","offer_id":67602589384740,"sku":"WS-CA-DEF-V-001-70","price":269.95,"currency_code":"USD","in_stock":true},{"title":"Flip-Up Vent Panel - Scratch-Resistant Dark Tint (HD5-HD10 only)","offer_id":67602589417508,"sku":"WS-CA-DEF-V-001-73","price":389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/can-am-defender-vented-windshield-01.jpg?v=1791169624"},{"product_id":"superatv-can-am-defender-flip-windshield","title":"SuperATV Can-Am Defender Flip Windshield (2016+)","description":"\u003cp\u003e\u003cstrong\u003eThe SuperATV Can-Am Defender Flip Windshield lets Defender HD5, HD7, HD8, HD9 and HD10 owners run closed, vented or fully open from inside the cab, using a multi-stage latch and gas struts on scratch-resistant 1\/4-inch polycarbonate.\u003c\/strong\u003e A foam gasket and bulb seal close it tight, and a metal cross-brace with heavy-duty clamps keeps it rattle-free.\u003c\/p\u003e\u003cp\u003eThis flip up windshield for Can-Am Defender HD5 through HD10 machines sets three ways, so it covers the job of a Can-Am Defender folding windshield and a full windshield in one. If you are searching for a Can-Am Defender flip-up windshield you adjust by hand, this is the manual version. Whether you need a Can-Am Defender HD8 windshield or a Can-Am Defender HD10 windshield, it is the same UTV flip windshield: a 1\/4-inch polycarbonate windshield with a scratch-resistant windshield coating on both sides, and one of the most versatile Can-Am Defender windshield styles for year-round use.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThree riding positions: closed, vented or fully open\u003c\/li\u003e\n\u003cli\u003eMulti-stage latching mechanism you can adjust from the cab\u003c\/li\u003e\n\u003cli\u003eGas struts hold it open or closed without bouncing\u003c\/li\u003e\n\u003cli\u003eFoam gasket and bulb seal for a tight close\u003c\/li\u003e\n\u003cli\u003eHeavy-duty clamps and metal cross-brace\u003c\/li\u003e\n\u003cli\u003eXR Optic Hard Coating on both sides\u003c\/li\u003e\n\u003cli\u003e1\/4-inch polycarbonate\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBuilt To Solve: Changing Weather on a Defender Ride\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWeather that shifts between cold, rain and heat during a single day\u003c\/li\u003e\n\u003cli\u003eHaving to pick between full protection and open-cab airflow\u003c\/li\u003e\n\u003cli\u003eWindshields that bounce or slam when flipped open\u003c\/li\u003e\n\u003cli\u003eScratches from branches and debris on uncoated poly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBest For: Year-Round Defender Owners Who Want Versatility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWork and hunting Defenders used across seasons\u003c\/li\u003e\n\u003cli\u003eOwners who want one windshield for winter and summer\u003c\/li\u003e\n\u003cli\u003eRiders who want to adjust without leaving the cab\u003c\/li\u003e\n\u003cli\u003eDefender HD11 owners need the separate HD11 flip windshield; this part is listed for HD5 through HD10 only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4-inch polycarbonate\u003c\/li\u003e\n\u003cli\u003eCoating: XR Optic Hard Coating, both sides\u003c\/li\u003e\n\u003cli\u003ePositions: closed, vented, fully open\u003c\/li\u003e\n\u003cli\u003eHardware: gas struts, foam gasket, bulb seal, heavy-duty clamps, metal cross-brace\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: FWS-CA-DEF-70\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCan-Am Defender HD5 and HD5 DPS (2017-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD7, HD7 DPS and MAX HD7 (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD8, DPS, XT and XT Cab, plus MAX HD8 versions (2016-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD9, HD9 DPS, HD9 DPS Cab and HD9 XT, plus MAX HD9, MAX HD9 DPS and MAX HD9 XT (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD10 base, DPS, XT, XT Cab, XTP, XMR, Mossy Oak, Pro, Limited and 6x6, plus MAX HD10 DPS, XT, XT Cab, XMR, Lone Star Edition and Limited (2016+; exact start year varies by trim)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNot listed for the Defender HD11; HD11 owners should choose the HD11-specific flip windshield. SuperATV notes this windshield can be used with most soft or hard tops.\u003c\/p\u003e\u003cp\u003eSuperATV lists these applications by trim. Fitment is not guaranteed on trims or model years not listed above, or on machines with modified cab structures; confirm your exact model before ordering.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWill a flip windshield keep me warm and still let air in?\u003c\/h3\u003e\u003cp\u003eYes. You can run it fully closed to block wind and cold, vented for a breeze, or open for an open-cab feel.\u003c\/p\u003e\u003ch3\u003eDoes this flip windshield fit the Defender HD11?\u003c\/h3\u003e\u003cp\u003eNo. SuperATV lists this part, FWS-CA-DEF-70, for the HD5, HD7, HD8, HD9 and HD10. The HD11 uses a separate flip windshield.\u003c\/p\u003e\u003ch3\u003eIs the flip windshield DOT approved for road use?\u003c\/h3\u003e\u003cp\u003eNo. SuperATV states polycarbonate flip windshields are not DOT approved because DOT certification applies only to laminated safety glass.\u003c\/p\u003e\u003ch3\u003eHow hard is it to install?\u003c\/h3\u003e\u003cp\u003eSuperATV says installation is straightforward with basic hand tools, all mounting hardware and pre-cut seals are included, and it mounts to the factory cage with no drilling required. An install sheet and install video are available.\u003c\/p\u003e\u003ch3\u003eWill it stay open on rough trails?\u003c\/h3\u003e\u003cp\u003eYes. The gas struts hold the windshield in open, vented or closed positions and prevent bouncing or slamming.\u003c\/p\u003e\u003ch3\u003eCan I run a roof with it?\u003c\/h3\u003e\u003cp\u003eSuperATV states it is compatible with most SuperATV soft and hard roofs.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eWhy SuperATV\u003c\/h2\u003e\u003cp\u003eSuperATV designs and cuts its windshields in-house and backs each one with a 1-year warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get the vehicle-specific Defender fit without hunting across sites.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFinish Your Can-Am Defender All-Season Setup\u003c\/h2\u003e\u003cp\u003eConfirm your Defender is an HD5, HD7, HD8, HD9 or HD10 in the fitment list; HD11 owners need the HD11 flip windshield. Add a Defender rear windshield and roof to close the cab when you run the flip windshield shut.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eInstallation Video\u003c\/h2\u003e\u003cdiv class=\"video-wrapper\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/V3dZz2Xw9Fo\" title=\"Flip Windshield Install | Can-Am Defender | How To | SuperATV\" frameborder=\"0\" allowfullscreen loading=\"lazy\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@graph\": [{\"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Will a flip windshield keep me warm and still let air in?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. You can run it fully closed to block wind and cold, vented for a breeze, or open for an open-cab feel.\"}}, {\"@type\": \"Question\", \"name\": \"Does this flip windshield fit the Defender HD11?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. SuperATV lists this part, FWS-CA-DEF-70, for the HD5, HD7, HD8, HD9 and HD10. The HD11 uses a separate flip windshield.\"}}, {\"@type\": \"Question\", \"name\": \"Is the flip windshield DOT approved for road use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. SuperATV states polycarbonate flip windshields are not DOT approved because DOT certification applies only to laminated safety glass.\"}}, {\"@type\": \"Question\", \"name\": \"How hard is it to install?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV says installation is straightforward with basic hand tools, all mounting hardware and pre-cut seals are included, and it mounts to the factory cage with no drilling required. An install sheet and install video are available.\"}}, {\"@type\": \"Question\", \"name\": \"Will it stay open on rough trails?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. The gas struts hold the windshield in open, vented or closed positions and prevent bouncing or slamming.\"}}, {\"@type\": \"Question\", \"name\": \"Can I run a roof with it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV states it is compatible with most SuperATV soft and hard roofs.\"}}]}, {\"@type\": \"VideoObject\", \"name\": \"Flip Windshield Install | Can-Am Defender | How To | SuperATV\", \"description\": \"Official SuperATV install video: Flip Windshield Install | Can-Am Defender | How To | SuperATV.\", \"thumbnailUrl\": \"https:\/\/i.ytimg.com\/vi\/V3dZz2Xw9Fo\/hqdefault.jpg\", \"uploadDate\": \"2018-11-21T06:16:38-08:00\", \"embedUrl\": \"https:\/\/www.youtube.com\/embed\/V3dZz2Xw9Fo\", \"contentUrl\": \"https:\/\/www.youtube.com\/watch?v=V3dZz2Xw9Fo\"}]}\u003c\/script\u003e","brand":"SuperATV","offers":[{"title":"Default Title","offer_id":67602589810724,"sku":"FWS-CA-DEF-70","price":659.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/can-am-defender-flip-windshield-01.jpg?v=1791169671"},{"product_id":"superatv-can-am-defender-hd11-flip-windshield","title":"SuperATV Can-Am Defender HD11 Flip Windshield (2026+)","description":"\u003cp\u003e\u003cstrong\u003eThe SuperATV Can-Am Defender HD11 Flip Windshield is cut for the 2026+ Defender HD11 and MAX HD11, letting you run closed, vented or fully open in scratch-resistant 1\/4-inch polycarbonate.\u003c\/strong\u003e A bulb seal, foam gasket and heavy-duty clamps keep it quiet and leak-free, and strong gas struts keep it from slamming shut.\u003c\/p\u003e\u003cp\u003eEarlier Defender flip windshields are not listed for the new cab, so this is the Can-Am Defender HD11 windshield to choose if you want flip-up versatility. It also fits as a Can-Am Defender MAX HD11 windshield and covers Limited, XT, XT Cab, XMR and Lone Star trims, so it doubles as a Can-Am Defender Limited windshield for 2026 owners. If you are shopping for a 2026 Can-Am Defender windshield with flip-up airflow, this Can-Am Defender HD11 flip windshield is a UTV flip windshield and a polycarbonate windshield cut for the HD11, with a scratch-resistant windshield coating. It is the HD11 counterpart to SuperATV's Can-Am Defender flip windshield for HD5 through HD10.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThree riding positions: closed, vented or fully open\u003c\/li\u003e\n\u003cli\u003eBulb seal, foam gasket and heavy-duty clamps\u003c\/li\u003e\n\u003cli\u003eGas struts keep it from slamming shut\u003c\/li\u003e\n\u003cli\u003e1\/4-inch polycarbonate, rated by SuperATV at 250x stronger than glass and 25x stronger than acrylic\u003c\/li\u003e\n\u003cli\u003eXR Optic Hard Coating for scratch and UV resistance\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBuilt To Solve: Weather Protection for the New Defender HD11\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOlder Defender flip windshields that are not listed for the HD11\u003c\/li\u003e\n\u003cli\u003eRain, mud and cold getting into an open HD11 cab\u003c\/li\u003e\n\u003cli\u003eWanting airflow on warm days without removing the windshield\u003c\/li\u003e\n\u003cli\u003eLeaks and vibration from a poor-fitting windshield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBest For: 2026+ Defender HD11 and MAX HD11 Owners\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNew Defender HD11 owners setting up a cab for year-round use\u003c\/li\u003e\n\u003cli\u003eLimited, XT, XT Cab, XMR w\/Half Doors and Lone Star trims in the fitment list\u003c\/li\u003e\n\u003cli\u003eRiders who want one windshield for winter and summer\u003c\/li\u003e\n\u003cli\u003eHD5 through HD10 owners should choose the standard Defender flip windshield instead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4-inch polycarbonate\u003c\/li\u003e\n\u003cli\u003eCoating: XR Optic Hard Coating\u003c\/li\u003e\n\u003cli\u003ePositions: closed, vented, fully open\u003c\/li\u003e\n\u003cli\u003eHardware: bulb seal, foam gasket, heavy-duty clamps, gas struts\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: FWS-CA-HD11-70\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCan-Am Defender HD11 Limited, XMR w\/Half Doors, XT and XT Cab (2026+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender MAX HD11 Limited, Lone Star, Lone Star Cab, XMR w\/Half Doors, XT and XT Cab (2026+)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis part is HD11-specific. Defender HD5 through HD10 owners need the standard Defender flip windshield.\u003c\/p\u003e\u003cp\u003eSuperATV lists these applications by trim. Fitment is not guaranteed on trims or model years not listed above, or on machines with modified cab structures; confirm your exact model before ordering.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eDoes this flip windshield fit older Defenders?\u003c\/h3\u003e\u003cp\u003eNo. SuperATV lists FWS-CA-HD11-70 for the 2026+ Defender HD11 and MAX HD11 trims only.\u003c\/p\u003e\u003ch3\u003eWhat positions can I run it in?\u003c\/h3\u003e\u003cp\u003eOpen it for fresh air, close it to stay dry and warm, or leave it vented for a little breeze.\u003c\/p\u003e\u003ch3\u003eWill it leak or rattle?\u003c\/h3\u003e\u003cp\u003eSuperATV uses a bulb seal, foam gasket and heavy-duty clamps so you will not have to worry about leaks or vibrations.\u003c\/p\u003e\u003ch3\u003eIs it scratch resistant?\u003c\/h3\u003e\u003cp\u003eYes. It uses SuperATV's XR Optic Hard Coating, which adds resilience and UV protection against scratches, yellowing and fading.\u003c\/p\u003e\u003ch3\u003eHow is it installed?\u003c\/h3\u003e\u003cp\u003eAn official SuperATV install sheet for the HD11 flip windshield is available with this product.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eWhy SuperATV\u003c\/h2\u003e\u003cp\u003eSuperATV designs and cuts its windshields in-house and backs each one with a 1-year warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get the vehicle-specific Defender fit without hunting across sites.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eSet Up Your New Can-Am Defender HD11 Cab\u003c\/h2\u003e\u003cp\u003eConfirm your HD11 or MAX HD11 trim in the fitment list, then build out the cab with a Defender HD11 rear windshield to cut dust swirl. Owners of earlier HD5 through HD10 machines should order the standard Defender flip windshield.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does this flip windshield fit older Defenders?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. SuperATV lists FWS-CA-HD11-70 for the 2026+ Defender HD11 and MAX HD11 trims only.\"}}, {\"@type\": \"Question\", \"name\": \"What positions can I run it in?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Open it for fresh air, close it to stay dry and warm, or leave it vented for a little breeze.\"}}, {\"@type\": \"Question\", \"name\": \"Will it leak or rattle?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV uses a bulb seal, foam gasket and heavy-duty clamps so you will not have to worry about leaks or vibrations.\"}}, {\"@type\": \"Question\", \"name\": \"Is it scratch resistant?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. It uses SuperATV's XR Optic Hard Coating, which adds resilience and UV protection against scratches, yellowing and fading.\"}}, {\"@type\": \"Question\", \"name\": \"How is it installed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"An official SuperATV install sheet for the HD11 flip windshield is available with this product.\"}}]}\u003c\/script\u003e","brand":"SuperATV","offers":[{"title":"Default Title","offer_id":67602590171172,"sku":"FWS-CA-HD11-70","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/can-am-defender-hd11-flip-windshield-01.jpg?v=1791169713"},{"product_id":"superatv-can-am-defender-maxdrive-power-flip-windshield","title":"SuperATV Can-Am Defender MaxDrive Power Flip Windshield (2016+)","description":"\u003cp\u003e\u003cstrong\u003eThe SuperATV Can-Am Defender MaxDrive Power Flip Windshield opens, closes or stops anywhere from a dash rocker switch, so Defender HD5, HD7, HD8, HD9 and HD10 owners can change airflow without leaving the seat.\u003c\/strong\u003e High-strength electric actuators hold position on rough terrain, and the 1\/4-inch polycarbonate carries XR Optic Hard Coating on both sides.\u003c\/p\u003e\u003cp\u003eThis Can-Am Defender flip-up windshield moves on its own: it is a power flip windshield and an electric UTV windshield that replaces the latch of a manual Can-Am Defender flip windshield with a dash switch. As a flip up windshield for Can-Am Defender HD5 through HD10, it fits as a Can-Am Defender HD9 windshield or a Can-Am Defender HD10 windshield, using a polycarbonate windshield panel with a scratch-resistant windshield coating on both sides. It is the lower-priced powered Can-Am Defender windshield compared with the glass MaxDrive version.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDash-controlled power flip with a rocker switch\u003c\/li\u003e\n\u003cli\u003eHigh-strength electric actuators hold position on rough terrain\u003c\/li\u003e\n\u003cli\u003eHeavy-duty clamps for a rattle-free ride\u003c\/li\u003e\n\u003cli\u003e1\/4-inch polycarbonate, rated by SuperATV at 250 times stronger than glass\u003c\/li\u003e\n\u003cli\u003eXR Optic Hard Coating on both sides\u003c\/li\u003e\n\u003cli\u003eBlack printed border\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBuilt To Solve: Rain Breaks and Manual Latches on a Work Defender\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStopping to latch or unlatch a windshield every time it rains\u003c\/li\u003e\n\u003cli\u003eLosing work time in wet weather\u003c\/li\u003e\n\u003cli\u003eStreaky, scratched windshields after mud and brush\u003c\/li\u003e\n\u003cli\u003eSunspots and yellowing on uncoated poly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBest For: Work Defenders That Need Push-Button Weather Control\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFarm, ranch and job-site Defenders that run all day\u003c\/li\u003e\n\u003cli\u003eOwners who want power flip convenience at a lower price than glass\u003c\/li\u003e\n\u003cli\u003eRiders in mud and brush who need a coating on both sides\u003c\/li\u003e\n\u003cli\u003eDefender HD11 owners: this part is not listed for the HD11; owners wanting glass should compare the MaxDrive Power Flip Glass Windshield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4-inch polycarbonate\u003c\/li\u003e\n\u003cli\u003eCoating: XR Optic Hard Coating, both sides\u003c\/li\u003e\n\u003cli\u003eOperation: 2 electric actuators, dash rocker switch\u003c\/li\u003e\n\u003cli\u003eFinish: black printed border\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: PFWS-CA-DEF-70\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKit Includes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWiring harness\u003c\/li\u003e\n\u003cli\u003eWindshield\u003c\/li\u003e\n\u003cli\u003eRocker switch\u003c\/li\u003e\n\u003cli\u003eAll frame brackets\u003c\/li\u003e\n\u003cli\u003eAll gaskets and seals\u003c\/li\u003e\n\u003cli\u003e(4) Clamps\u003c\/li\u003e\n\u003cli\u003e(4) Actuator brackets\u003c\/li\u003e\n\u003cli\u003e(2) Pairs of hinges\u003c\/li\u003e\n\u003cli\u003e(2) Actuators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCan-Am Defender HD5 and HD5 DPS (2017-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD7, HD7 DPS and MAX HD7 (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD8 DPS, XT and XT Cab, plus MAX HD8, MAX HD8 DPS, XT and XT Cab (2016-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD9, HD9 DPS, HD9 DPS Cab and HD9 XT, plus MAX HD9, MAX HD9 DPS and MAX HD9 XT (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD10 base, DPS, XT, XT Cab, XTP, XMR, Mossy Oak, Pro, Limited and 6x6, plus MAX HD10 DPS, XT, XT Cab, XMR, Lone Star Edition and Limited (2016+; exact start year varies by trim)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSuperATV notes this windshield is not compatible with aftermarket intrusion bars and works with most hard and soft tops. It is not listed for the Defender HD11.\u003c\/p\u003e\u003cp\u003eSuperATV lists these applications by trim. Fitment is not guaranteed on trims or model years not listed above, or on machines with modified cab structures; confirm your exact model before ordering.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eHow does the MaxDrive Power Flip Windshield operate?\u003c\/h3\u003e\u003cp\u003eA dash rocker switch drives the electric actuators, so the windshield opens, closes and can be set to any position in between.\u003c\/p\u003e\u003ch3\u003eWill it fit my Defender HD11?\u003c\/h3\u003e\u003cp\u003eNo. SuperATV lists PFWS-CA-DEF-70 for the HD5, HD7, HD8, HD9 and HD10 trims in the fitment list. It is not listed for the HD11.\u003c\/p\u003e\u003ch3\u003eWill it work with my intrusion bar?\u003c\/h3\u003e\u003cp\u003eSuperATV states it is not compatible with aftermarket intrusion bars.\u003c\/p\u003e\u003ch3\u003eIs the polycarbonate coated?\u003c\/h3\u003e\u003cp\u003eYes. XR Optic Hard Coating is applied to both sides for scratch and UV resistance.\u003c\/p\u003e\u003ch3\u003ePower flip polycarbonate or glass?\u003c\/h3\u003e\u003cp\u003ePolycarbonate is lighter and far more impact resistant. The MaxDrive glass version adds DOT-approved laminated glass and an optional wiper kit at a higher price.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eWhy SuperATV\u003c\/h2\u003e\u003cp\u003eSuperATV designs and cuts its windshields in-house and backs each one with a 1-year warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get the vehicle-specific Defender fit without hunting across sites.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003ePair Your Defender Power Flip Windshield With a Rear Windshield\u003c\/h2\u003e\u003cp\u003eConfirm your Defender HD size and trim in the fitment list and check that you are not running an aftermarket intrusion bar. Add a Defender rear windshield and roof for a closed cab, or compare the glass MaxDrive version if you want a wiper.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"How does the MaxDrive Power Flip Windshield operate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A dash rocker switch drives the electric actuators, so the windshield opens, closes and can be set to any position in between.\"}}, {\"@type\": \"Question\", \"name\": \"Will it fit my Defender HD11?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. SuperATV lists PFWS-CA-DEF-70 for the HD5, HD7, HD8, HD9 and HD10 trims in the fitment list. It is not listed for the HD11.\"}}, {\"@type\": \"Question\", \"name\": \"Will it work with my intrusion bar?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV states it is not compatible with aftermarket intrusion bars.\"}}, {\"@type\": \"Question\", \"name\": \"Is the polycarbonate coated?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. XR Optic Hard Coating is applied to both sides for scratch and UV resistance.\"}}, {\"@type\": \"Question\", \"name\": \"Power flip polycarbonate or glass?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Polycarbonate is lighter and far more impact resistant. The MaxDrive glass version adds DOT-approved laminated glass and an optional wiper kit at a higher price.\"}}]}\u003c\/script\u003e","brand":"SuperATV","offers":[{"title":"Default Title","offer_id":67602590695460,"sku":"PFWS-CA-DEF-70","price":919.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/can-am-defender-maxdrive-power-flip-windshield-01.jpg?v=1791169756"},{"product_id":"superatv-can-am-defender-rear-windshield","title":"SuperATV Can-Am Defender Rear Windshield (2016+)","description":"\u003cp\u003e\u003cstrong\u003eThe SuperATV Can-Am Defender Rear Windshield blocks flying mud and debris behind the seats and stops the dust suction you get from running a front windshield alone, in tinted 1\/4-inch polycarbonate for Defender HD5 through HD11.\u003c\/strong\u003e Bulb seals keep out drafts and moisture, strong clamps prevent rattling, and it comes off and goes back on easily.\u003c\/p\u003e\u003cp\u003eA Can-Am Defender rear windshield is the piece many owners skip until dust starts swirling in. This rear windshield for Can-Am Defender HD5 through HD11 machines comes in light or dark tint, so it is also a Can-Am Defender tinted rear windshield, and it fits as a Can-Am Defender MAX rear windshield on the listed MAX trims. Whether you need a Can-Am Defender HD10 rear windshield or a Can-Am Defender HD11 rear windshield, this UTV rear windshield (some riders call it a Can-Am Defender back windshield) pairs with any Can-Am Defender windshield up front, in the same 1\/4-inch polycarbonate windshield material.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear cab protection from flying mud and debris\u003c\/li\u003e\n\u003cli\u003eEliminates dust suction caused by running a front windshield alone\u003c\/li\u003e\n\u003cli\u003e1\/4-inch tinted polycarbonate\u003c\/li\u003e\n\u003cli\u003eLight and dark tint options\u003c\/li\u003e\n\u003cli\u003eBulb seals and strong clamps for a rattle-free fit\u003c\/li\u003e\n\u003cli\u003eEasy to take off and put back on\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBuilt To Solve: Dust Swirl Behind a Defender Front Windshield\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDust pulled into the cab from behind once a front windshield is installed\u003c\/li\u003e\n\u003cli\u003eMud and roost thrown into the cab from the rear\u003c\/li\u003e\n\u003cli\u003eCold drafts through the back of the cab\u003c\/li\u003e\n\u003cli\u003eRattling rear panels on rough roads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBest For: Defender Owners Running a Front Windshield\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAny Defender with a front windshield and an OEM or SuperATV roof\u003c\/li\u003e\n\u003cli\u003eWork and hunting machines on dusty roads\u003c\/li\u003e\n\u003cli\u003eHD11 owners: choose the HD11 Without Snorkel option if your machine has no snorkel\u003c\/li\u003e\n\u003cli\u003eOwners who want airflow from the rear should look at the sliding rear windshield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4-inch polycarbonate\u003c\/li\u003e\n\u003cli\u003eOptions: Standard Light Tint; Standard Dark Tint; Scratch-Resistant Light Tint; Scratch-Resistant Light Tint for HD11 without snorkel\u003c\/li\u003e\n\u003cli\u003eSealing: bulb seals\u003c\/li\u003e\n\u003cli\u003eMounting: clamps\u003c\/li\u003e\n\u003cli\u003eRequires: OEM or SuperATV roof\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Numbers: RWS-CA-DEFXMR-76 (Standard Light Tint), RWS-CA-DEFXMR-71 (Standard Dark Tint), RWS-CA-DEFXMR-72 (Scratch-Resistant Light Tint), RWS-CA-HD11-72 (HD11 without snorkel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCan-Am Defender HD5 and HD5 DPS (2017-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD7, HD7 DPS and MAX HD7 (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD8, DPS, XT and XT Cab, plus MAX HD8 versions (2016-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD9, HD9 DPS, HD9 DPS Cab and HD9 XT, plus MAX HD9, MAX HD9 DPS and MAX HD9 XT (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD10 base, DPS, XT, XT Cab, XTP, XMR, Mossy Oak, Pro, Limited and 6x6, plus MAX HD10 DPS, XT, XT Cab, XMR, Lone Star Edition and Limited (2016+; exact start year varies by trim)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD11 Limited, XMR w\/Half Doors, XT and XT Cab, plus MAX HD11 Limited, Lone Star, Lone Star Cab, XMR w\/Half Doors, XT and XT Cab (2026+)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRoof required:\u003c\/strong\u003e SuperATV states you must have an OEM or SuperATV roof to install. \u003cstrong\u003eHD11:\u003c\/strong\u003e SuperATV lists the three standard part numbers as the With Snorkel versions for the HD11 and offers RWS-CA-HD11-72 for HD11 machines without a snorkel.\u003c\/p\u003e\u003cp\u003eSuperATV lists these applications by trim. Fitment is not guaranteed on trims or model years not listed above, or on machines with modified cab structures; confirm your exact model before ordering.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhy does a Defender need a rear windshield?\u003c\/h3\u003e\u003cp\u003eRunning a front windshield alone pulls dust into the cab from behind. A rear windshield eliminates that suction and blocks mud and debris.\u003c\/p\u003e\u003ch3\u003eDo I need a roof to install it?\u003c\/h3\u003e\u003cp\u003eYes. SuperATV states you must have an OEM or SuperATV roof to install.\u003c\/p\u003e\u003ch3\u003eWhich option do I choose for a Defender HD11?\u003c\/h3\u003e\u003cp\u003eSuperATV lists the three standard part numbers as the HD11 With Snorkel versions. If your HD11 has no snorkel, choose RWS-CA-HD11-72.\u003c\/p\u003e\u003ch3\u003eIs it easy to remove?\u003c\/h3\u003e\u003cp\u003eSuperATV says it is easy to take off and put back on.\u003c\/p\u003e\u003ch3\u003eStandard or scratch-resistant polycarbonate?\u003c\/h3\u003e\u003cp\u003eBoth are 1\/4-inch polycarbonate. The scratch-resistant version holds up better to dust and cleaning; the standard version costs less and comes in light or dark tint.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eWhy SuperATV\u003c\/h2\u003e\u003cp\u003eSuperATV designs and cuts its windshields in-house and backs each one with a 1-year warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get the vehicle-specific Defender fit without hunting across sites.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eClose Up Your Can-Am Defender Cab\u003c\/h2\u003e\u003cp\u003eConfirm you run an OEM or SuperATV roof, then pick your tint and, on an HD11, the snorkel option. Pair it with a Defender full, vented, flip or glass front windshield for a fully enclosed cab.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Why does a Defender need a rear windshield?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Running a front windshield alone pulls dust into the cab from behind. A rear windshield eliminates that suction and blocks mud and debris.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need a roof to install it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. SuperATV states you must have an OEM or SuperATV roof to install.\"}}, {\"@type\": \"Question\", \"name\": \"Which option do I choose for a Defender HD11?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV lists the three standard part numbers as the HD11 With Snorkel versions. If your HD11 has no snorkel, choose RWS-CA-HD11-72.\"}}, {\"@type\": \"Question\", \"name\": \"Is it easy to remove?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV says it is easy to take off and put back on.\"}}, {\"@type\": \"Question\", \"name\": \"Standard or scratch-resistant polycarbonate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Both are 1\/4-inch polycarbonate. The scratch-resistant version holds up better to dust and cleaning; the standard version costs less and comes in light or dark tint.\"}}]}\u003c\/script\u003e","brand":"SuperATV","offers":[{"title":"Standard Polycarbonate - Light Tint","offer_id":67602591547428,"sku":"RWS-CA-DEFXMR-76","price":169.95,"currency_code":"USD","in_stock":true},{"title":"Standard Polycarbonate - Dark Tint","offer_id":67602591580196,"sku":"RWS-CA-DEFXMR-71","price":199.95,"currency_code":"USD","in_stock":true},{"title":"Scratch-Resistant Polycarbonate - Light Tint","offer_id":67602591612964,"sku":"RWS-CA-DEFXMR-72","price":289.95,"currency_code":"USD","in_stock":true},{"title":"Scratch-Resistant Light Tint - HD11 Without Snorkel","offer_id":67602591645732,"sku":"RWS-CA-HD11-72","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/can-am-defender-rear-windshield-01.jpg?v=1791169799"},{"product_id":"superatv-can-am-defender-sliding-rear-windshield","title":"SuperATV Can-Am Defender Sliding Rear Windshield (2016+)","description":"\u003cp\u003e\u003cstrong\u003eThe SuperATV Can-Am Defender Sliding Rear Windshield stops the dust swirl you get from a front windshield alone, with an FS Pro sliding center window that opens for airflow and quick bed access on Defender HD5 through HD11.\u003c\/strong\u003e It is lightly tinted 1\/4-inch polycarbonate, precision-cut to the frame, and held rattle-free with a full-length rubber bulb and heavy-duty clamps.\u003c\/p\u003e\u003cp\u003eThis Can-Am Defender sliding rear windshield is a Can-Am Defender rear windshield with a Can-Am Defender rear sliding window built in, so you get dust control and airflow from one panel. It works as a rear windshield for Can-Am Defender HD5 through HD10 and as a Can-Am Defender HD11 rear windshield, and it fits as a Can-Am Defender MAX rear windshield on the listed MAX trims. Compared with a solid UTV rear windshield, a UTV sliding rear windshield lets you open the back on hot days. It pairs with any Can-Am Defender windshield up front and uses tough polycarbonate windshield construction.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFS Pro sliding center window for rear-cab airflow and bed access\u003c\/li\u003e\n\u003cli\u003eEliminates dust suction caused by running a front windshield alone\u003c\/li\u003e\n\u003cli\u003e1\/4-inch tinted polycarbonate\u003c\/li\u003e\n\u003cli\u003eLightly tinted, scratch-resistant sliding window\u003c\/li\u003e\n\u003cli\u003eFull-length rubber bulb and heavy-duty clamps\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBuilt To Solve: Dust Suction and No Airflow From the Rear\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDust pulled into the cab from behind with a front windshield installed\u003c\/li\u003e\n\u003cli\u003eA sealed rear that gets hot in the sun\u003c\/li\u003e\n\u003cli\u003eReaching gear in the bed without getting out\u003c\/li\u003e\n\u003cli\u003eRattling rear panels on rough roads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBest For: Defender Owners Who Want a Rear Window That Opens\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWork Defenders that grab tools from the bed throughout the day\u003c\/li\u003e\n\u003cli\u003eHot-climate riders who want airflow without dust\u003c\/li\u003e\n\u003cli\u003eOwners with an OEM or SuperATV roof\u003c\/li\u003e\n\u003cli\u003eOwners who want glass should compare the Defender glass sliding rear windshield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 1\/4-inch tinted polycarbonate\u003c\/li\u003e\n\u003cli\u003eWindow: FS Pro sliding center window\u003c\/li\u003e\n\u003cli\u003eSealing: full-length rubber bulb\u003c\/li\u003e\n\u003cli\u003eMounting: heavy-duty clamps\u003c\/li\u003e\n\u003cli\u003eRequires: OEM or SuperATV roof\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: RWS-CA-DEF-SGW-76\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCan-Am Defender HD5 and HD5 DPS (2017-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD7, HD7 DPS, MAX HD7 and MAX HD7 DPS (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD8, DPS, XT and XT Cab, plus MAX HD8 versions (2016-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD9, HD9 DPS, MAX HD9 and MAX HD9 DPS (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD10 base, DPS, XT, XT Cab, XTP, XMR, Mossy Oak, Pro, Limited and 6x6, plus MAX HD10 DPS, XT, XT Cab, XMR, Lone Star Edition and Limited (2016+; exact start year varies by trim)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD11 Limited, XMR w\/Half Doors, XT and XT Cab, plus MAX HD11 Limited, Lone Star, Lone Star Cab, XMR w\/Half Doors, XT and XT Cab (2026+)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRoof required:\u003c\/strong\u003e SuperATV states you must have an OEM or SuperATV roof to install.\u003c\/p\u003e\u003cp\u003eSuperATV lists these applications by trim. Fitment is not guaranteed on trims or model years not listed above, or on machines with modified cab structures; confirm your exact model before ordering.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eWhat does the sliding window do?\u003c\/h3\u003e\u003cp\u003eThe FS Pro sliding window opens for a breeze or closes tight against dust, rain or your own rooster tail, and it gives quick access to the bed.\u003c\/p\u003e\u003ch3\u003eDo I need a roof?\u003c\/h3\u003e\u003cp\u003eYes. SuperATV states you must have an OEM or SuperATV roof to install.\u003c\/p\u003e\u003ch3\u003eDoes it fit the Defender HD11?\u003c\/h3\u003e\u003cp\u003eYes. SuperATV lists the same part, RWS-CA-DEF-SGW-76, for the HD11 trims in the fitment list, as well as HD5 through HD10.\u003c\/p\u003e\u003ch3\u003eHow strong is the polycarbonate?\u003c\/h3\u003e\u003cp\u003eSuperATV rates its 1\/4-inch polycarbonate at 25 times stronger than acrylic and 250 times stronger than glass.\u003c\/p\u003e\u003ch3\u003eHow hard is installation?\u003c\/h3\u003e\u003cp\u003eSuperATV describes installation as quick and easy, with a full-length rubber bulb and heavy-duty clamps.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eWhy SuperATV\u003c\/h2\u003e\u003cp\u003eSuperATV designs and cuts its windshields in-house and backs each one with a 1-year warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get the vehicle-specific Defender fit without hunting across sites.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eComplete Your Can-Am Defender Cab With a Sliding Rear Window\u003c\/h2\u003e\u003cp\u003eConfirm your roof is OEM or SuperATV and your trim is in the fitment list. Pair this sliding rear windshield with a Defender full, vented, flip or glass front windshield to close up the cab.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What does the sliding window do?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The FS Pro sliding window opens for a breeze or closes tight against dust, rain or your own rooster tail, and it gives quick access to the bed.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need a roof?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. SuperATV states you must have an OEM or SuperATV roof to install.\"}}, {\"@type\": \"Question\", \"name\": \"Does it fit the Defender HD11?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. SuperATV lists the same part, RWS-CA-DEF-SGW-76, for the HD11 trims in the fitment list, as well as HD5 through HD10.\"}}, {\"@type\": \"Question\", \"name\": \"How strong is the polycarbonate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV rates its 1\/4-inch polycarbonate at 25 times stronger than acrylic and 250 times stronger than glass.\"}}, {\"@type\": \"Question\", \"name\": \"How hard is installation?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV describes installation as quick and easy, with a full-length rubber bulb and heavy-duty clamps.\"}}]}\u003c\/script\u003e","brand":"SuperATV","offers":[{"title":"Default Title","offer_id":67602592333860,"sku":"RWS-CA-DEF-SGW-76","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/can-am-defender-sliding-rear-windshield-01.jpg?v=1791169924"},{"product_id":"superatv-can-am-defender-rear-glass-windshield","title":"SuperATV Can-Am Defender Rear Glass Windshield (2016+)","description":"\u003cp\u003e\u003cstrong\u003eThe SuperATV Can-Am Defender Rear Glass Windshield closes the back of the cab with 1\/8-inch tinted glass, stopping the dust, wind and debris pulled in when you run a front windshield alone on Defender HD5, HD7, HD8, HD9 and HD10.\u003c\/strong\u003e Heavy-duty brackets and precision seals keep air and water out, and the bulb seal and brackets come preinstalled.\u003c\/p\u003e\u003cp\u003eThis Can-Am Defender rear glass windshield is the glass alternative to a polycarbonate Can-Am Defender rear windshield. Fitted as a rear windshield for Can-Am Defender HD5 through HD10 non-XMR machines, it gives you a Can-Am Defender glass rear window that matches a Can-Am Defender glass windshield up front. It also fits as a Can-Am Defender MAX rear windshield and a Can-Am Defender HD10 rear windshield on the listed trims. Compared with a polycarbonate UTV rear windshield, a UTV rear glass windshield resists scratching better, making it a natural match for a glass Can-Am Defender windshield setup.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1\/8-inch lightly tinted glass\u003c\/li\u003e\n\u003cli\u003eEliminates dust suction caused by running a front windshield alone\u003c\/li\u003e\n\u003cli\u003eFull-width rear coverage behind the seats\u003c\/li\u003e\n\u003cli\u003eHeavy-duty brackets and precision seals\u003c\/li\u003e\n\u003cli\u003eBulb seal and brackets preinstalled; all hardware included\u003c\/li\u003e\n\u003cli\u003eScreen-printed perimeter\u003c\/li\u003e\n\u003cli\u003eVersions for OEM and SuperATV roofs\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBuilt To Solve: Dust Pulled Into a Defender Cab From Behind\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDust and debris pulled in from the rear once a front windshield is installed\u003c\/li\u003e\n\u003cli\u003ePolycarbonate rear panels that scratch over time\u003c\/li\u003e\n\u003cli\u003eAir and water leaking in at the back of the cab\u003c\/li\u003e\n\u003cli\u003eHarsh sun through an open rear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBest For: Defender Owners Building a Glass Cab\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOwners pairing a glass front windshield with a matching glass rear\u003c\/li\u003e\n\u003cli\u003eHD5 through HD10 machines with an OEM or SuperATV roof\u003c\/li\u003e\n\u003cli\u003eNon-XMR Defenders without the SuperATV snorkel kit\u003c\/li\u003e\n\u003cli\u003eXMR owners and HD11 owners need a different rear windshield; this one is not listed for them\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGlass: 1\/8-inch tinted glass\u003c\/li\u003e\n\u003cli\u003eCoverage: full-width rear\u003c\/li\u003e\n\u003cli\u003eMounting: heavy-duty brackets (preinstalled), all hardware included\u003c\/li\u003e\n\u003cli\u003eSealing: precision seals, preinstalled bulb seal\u003c\/li\u003e\n\u003cli\u003eRoof versions: With OEM Roof; With SuperATV Roof\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Numbers: RGW-CA-DEF (OEM roof), RGW-CA-DEF-001 (SuperATV roof)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCan-Am Defender HD5 and HD5 DPS (2017-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD7, HD7 DPS, MAX HD7 and MAX HD7 DPS (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD8, DPS, XT and XT Cab, plus MAX HD8 versions (2016-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD9, HD9 DPS, MAX HD9 and MAX HD9 DPS (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD10 base, DPS, XT, XT Cab, XTP, Mossy Oak, Pro, Limited and 6x6, plus MAX HD10 DPS, XT, XT Cab, Lone Star Edition and Limited (2016+; exact start year varies by trim)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNot compatible\u003c\/strong\u003e with XMR models or the SuperATV Snorkel Kit (SKL-CA-DEF), per SuperATV. Choose the version that matches your roof: OEM or SuperATV. Not listed for the Defender HD11.\u003c\/p\u003e\u003cp\u003eSuperATV lists these applications by trim. Fitment is not guaranteed on trims or model years not listed above, or on machines with modified cab structures; confirm your exact model before ordering.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eDoes it fit the Defender XMR?\u003c\/h3\u003e\u003cp\u003eNo. SuperATV states it is not compatible with XMR models.\u003c\/p\u003e\u003ch3\u003eWhich roof version do I need?\u003c\/h3\u003e\u003cp\u003eChoose With OEM Roof for a factory Can-Am roof or With SuperATV Roof if you run a SuperATV roof. Both are the same price.\u003c\/p\u003e\u003ch3\u003eHow thick is the glass?\u003c\/h3\u003e\u003cp\u003eSuperATV specifies 1\/8-inch tinted glass.\u003c\/p\u003e\u003ch3\u003eIs installation difficult?\u003c\/h3\u003e\u003cp\u003eEvery piece of hardware is included, and the bulb seal and brackets come preinstalled. SuperATV says the install takes minutes.\u003c\/p\u003e\u003ch3\u003eWill it work with a snorkel kit?\u003c\/h3\u003e\u003cp\u003eSuperATV states it is not compatible with its Snorkel Kit, SKL-CA-DEF.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eWhy SuperATV\u003c\/h2\u003e\u003cp\u003eSuperATV designs and cuts its windshields in-house and backs each one with a 1-year warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get the vehicle-specific Defender fit without hunting across sites.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFinish Your Can-Am Defender Glass Cab Upgrade\u003c\/h2\u003e\u003cp\u003eConfirm your Defender is not an XMR and does not run the SuperATV snorkel kit, then pick the OEM-roof or SuperATV-roof version. Pair it with the Defender glass or power flip glass front windshield for a full glass cab.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does it fit the Defender XMR?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. SuperATV states it is not compatible with XMR models.\"}}, {\"@type\": \"Question\", \"name\": \"Which roof version do I need?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Choose With OEM Roof for a factory Can-Am roof or With SuperATV Roof if you run a SuperATV roof. Both are the same price.\"}}, {\"@type\": \"Question\", \"name\": \"How thick is the glass?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV specifies 1\/8-inch tinted glass.\"}}, {\"@type\": \"Question\", \"name\": \"Is installation difficult?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Every piece of hardware is included, and the bulb seal and brackets come preinstalled. SuperATV says the install takes minutes.\"}}, {\"@type\": \"Question\", \"name\": \"Will it work with a snorkel kit?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"SuperATV states it is not compatible with its Snorkel Kit, SKL-CA-DEF.\"}}]}\u003c\/script\u003e","brand":"SuperATV","offers":[{"title":"With OEM Roof","offer_id":67602592366628,"sku":"RGW-CA-DEF","price":524.95,"currency_code":"USD","in_stock":true},{"title":"With SuperATV Roof","offer_id":67602592399396,"sku":"RGW-CA-DEF-001","price":524.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/can-am-defender-rear-glass-windshield-01.jpg?v=1791169972"},{"product_id":"superatv-can-am-defender-glass-sliding-rear-windshield","title":"SuperATV Can-Am Defender Glass Sliding Rear Windshield (2016+)","description":"\u003cp\u003e\u003cstrong\u003eThe SuperATV Can-Am Defender Glass Sliding Rear Windshield closes the gap that pulls dust into the cab when you run a front windshield, while its large sliding panel gives Defender HD5 through HD10 owners full rear airflow control.\u003c\/strong\u003e Tinted glass cuts sun glare, pickup-style latches and sliders hold up to daily use, and it ships preassembled with clamp-on hardware.\u003c\/p\u003e\u003cp\u003eThis Can-Am Defender glass sliding rear windshield combines a Can-Am Defender rear glass windshield with a pickup-style slider, so it does the job of a Can-Am Defender sliding rear windshield in glass. As a rear windshield for Can-Am Defender HD5 through HD10 non-XMR machines, it pairs with a Can-Am Defender glass windshield up front, and it fits as a Can-Am Defender MAX rear windshield on the listed MAX trims. Among Can-Am Defender rear windshield choices, it is both a UTV rear glass windshield and a UTV sliding rear windshield, and a natural finish to any glass Can-Am Defender windshield setup.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLarge sliding center panel for airflow and access\u003c\/li\u003e\n\u003cli\u003eEliminates dust suction caused by running a front windshield alone\u003c\/li\u003e\n\u003cli\u003eLightly tinted glass blocks rain, mud and debris\u003c\/li\u003e\n\u003cli\u003ePickup-style latches and sliders\u003c\/li\u003e\n\u003cli\u003eBlack screen print\u003c\/li\u003e\n\u003cli\u003eShips preassembled with clamp-on hardware\u003c\/li\u003e\n\u003cli\u003eVersions for OEM and SuperATV roofs\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBuilt To Solve: Dust Suction Without Losing Rear Airflow\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDust pulled into the cab from behind with a front windshield installed\u003c\/li\u003e\n\u003cli\u003eA sealed glass rear that gets hot\u003c\/li\u003e\n\u003cli\u003eScratched polycarbonate rear windows\u003c\/li\u003e\n\u003cli\u003eLong install times on rear windshields\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eBest For: Defender Glass Cab Builds That Still Need Airflow\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOwners pairing a glass front windshield with a matching rear\u003c\/li\u003e\n\u003cli\u003eWork Defenders that want a pickup-style sliding rear window\u003c\/li\u003e\n\u003cli\u003eHD5 through HD10 machines with an OEM or SuperATV roof\u003c\/li\u003e\n\u003cli\u003eXMR owners, HD11 owners and anyone with an aftermarket roof need a different rear windshield\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGlass: lightly tinted\u003c\/li\u003e\n\u003cli\u003eWindow: large sliding center panel with pickup-style latches and sliders\u003c\/li\u003e\n\u003cli\u003eFinish: black screen print\u003c\/li\u003e\n\u003cli\u003eMounting: clamp-on hardware, ships preassembled\u003c\/li\u003e\n\u003cli\u003eRoof versions: With OEM Roof; With SuperATV Roof\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Numbers: RGWS-CA-DEF (OEM roof), RGWS-CA-DEF-001 (SuperATV roof)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCan-Am Defender HD5 and HD5 DPS (2017-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD7, HD7 DPS, MAX HD7 and MAX HD7 DPS (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD8, DPS, XT and XT Cab, plus MAX HD8 versions (2016-2021)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD9, HD9 DPS, MAX HD9 and MAX HD9 DPS (2022+)\u003c\/li\u003e\n\u003cli\u003eCan-Am Defender HD10 base, DPS, XT, XT Cab, XTP, Mossy Oak, Pro, Limited and 6x6, plus MAX HD10 DPS, XT, XT Cab, Lone Star Edition and Limited (2016+; exact start year varies by trim)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNot compatible\u003c\/strong\u003e with XMR models, the SuperATV Snorkel Kit (SKL-CA-DEF) or aftermarket roofs, per SuperATV. Choose the OEM-roof or SuperATV-roof version. Not listed for the Defender HD11.\u003c\/p\u003e\u003cp\u003eSuperATV lists these applications by trim. Fitment is not guaranteed on trims or model years not listed above, or on machines with modified cab structures; confirm your exact model before ordering.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003ch3\u003eDoes the glass sliding rear windshield fit an XMR?\u003c\/h3\u003e\u003cp\u003eNo. SuperATV states it is not compatible with XMR models.\u003c\/p\u003e\u003ch3\u003eCan I use it with an aftermarket roof?\u003c\/h3\u003e\u003cp\u003eNo. SuperATV states it is not compatible with aftermarket roofs. Choose the With OEM Roof or With SuperATV Roof version.\u003c\/p\u003e\u003ch3\u003eHow does the sliding panel work?\u003c\/h3\u003e\u003cp\u003eA large sliding panel with pickup-style latches and sliders opens for airflow and closes against dust.\u003c\/p\u003e\u003ch3\u003eHow long does installation take?\u003c\/h3\u003e\u003cp\u003eIt ships preassembled and mounts with clamp-on hardware. Official SuperATV install sheets are available for each roof version.\u003c\/p\u003e\u003ch3\u003eGlass or polycarbonate sliding rear?\u003c\/h3\u003e\u003cp\u003eGlass stays clearer over time and matches a glass front windshield. The polycarbonate sliding rear windshield costs less and also fits the HD11.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eWhy SuperATV\u003c\/h2\u003e\u003cp\u003eSuperATV designs and cuts its windshields in-house and backs each one with a 1-year warranty against manufacturing defects. Dunes 2 Dezert SXS ships SuperATV parts nationwide, so you get the vehicle-specific Defender fit without hunting across sites.\u003c\/p\u003e\n\u003chr\u003e\u003ch2\u003eComplete Your Can-Am Defender Glass Cab\u003c\/h2\u003e\u003cp\u003eConfirm your Defender is not an XMR, has no SuperATV snorkel kit and runs an OEM or SuperATV roof, then pick the matching version. Pair it with the Defender glass or MaxDrive power flip glass front windshield.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does the glass sliding rear windshield fit an XMR?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. SuperATV states it is not compatible with XMR models.\"}}, {\"@type\": \"Question\", \"name\": \"Can I use it with an aftermarket roof?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. SuperATV states it is not compatible with aftermarket roofs. Choose the With OEM Roof or With SuperATV Roof version.\"}}, {\"@type\": \"Question\", \"name\": \"How does the sliding panel work?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A large sliding panel with pickup-style latches and sliders opens for airflow and closes against dust.\"}}, {\"@type\": \"Question\", \"name\": \"How long does installation take?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It ships preassembled and mounts with clamp-on hardware. Official SuperATV install sheets are available for each roof version.\"}}, {\"@type\": \"Question\", \"name\": \"Glass or polycarbonate sliding rear?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Glass stays clearer over time and matches a glass front windshield. The polycarbonate sliding rear windshield costs less and also fits the HD11.\"}}]}\u003c\/script\u003e","brand":"SuperATV","offers":[{"title":"With OEM Roof","offer_id":67602592464932,"sku":"RGWS-CA-DEF","price":734.95,"currency_code":"USD","in_stock":true},{"title":"With SuperATV Roof","offer_id":67602592497700,"sku":"RGWS-CA-DEF-001","price":734.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/6488\/3236\/files\/can-am-defender-glass-sliding-rear-windshield-01.jpg?v=1791170017"}],"url":"https:\/\/dunes2dezertsxs.com\/collections\/can-am-defender-windshields.oembed","provider":"Dunes 2 Dezert SXS","version":"1.0","type":"link"}